• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.461-462
• /
• 2006

This paper reports on the development of a scanning probe microscopy(SPM) tip with caborn nanotubes. We used an electric field which causes dielectrophoresis(DEP), to align and deposit CNTs on a metal-coated SPM tip. Using the CNT attached SPM tip, we have obtained an enhanced resolution and wear property compared to that from the bare silicon tip through the scanning of the surface of the bio materials. The carbon nanotube tip align toward the source of the ion beam allowing their orientation to be changed at precise angles. By this technique, metal coated carbon nanotube tips that are several micrometer in length are prepared for scanning probe microscopy.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.530-537
• /
• 2004

Development of a versatile nanomanipulation tool is an overarching theme in nanotechnology. Such a tool will likely revolutionize the field given that it will enable fabrication and operation of a wealth of interesting nanodevices. This study seeks funding to create a novel nanomanipulation system with the ultimate goal of using this system for nanomanufacturing at the molecular level. The proposed design differs from existing approaches. It is based on a nanoscale ion trap integrated to a scanning prove microscope (SPM) tip. In this design, molecules to be assembled will be ionized and collected in the nanoscale ion trap all in an ultra high vacuum (UHV) environment. Once filled with the molecular ions, the nanoscale ion trap-SPM tip will be moved on a substrate surface using scanning probe microscopy techniques. The molecular ions will be placed at their precise locations on the surface. By virtue of the SPM, the devices that are being nanomanufactured will be imaged in real time as the molecular assembly process is carried out. In the later stages, automation of arrays of these nanomanipulators will be developed.

• 대한인간공학회지
• /
• 제31권2호
• /
• pp.345-352
• /
• 2012

Objective: The aim of this study is to evaluate the accuracy and reliability of Spine-Pelvis Monitor(SPM) that was developed to measure 3-dimensional motion of spine and pelvis using tilt sensor and gyro sensor. Background: The main cause of low back pain is very much associated with the task using the low back and pelvis, but no measurement technique can quantify the both spine and pelvis. Method: For testing the SPM, 125 angles from three anatomical planes were measured three times in order to evaluate the accuracy and reliability. The accuracy of SPM in measuring dynamic motion was evaluated using digital motion analysis system. The motion pattern captured by two measuring methods was compared with each other. In result, the percentage error and Cronbach coefficient alpha were calculated to evaluate the accuracy and reliability. Results: The percentage error was 0.35% in flexion-extension on sagittal plane, 0.43% in lateral bending on coronal plane, and 0.40% in twisting on transverse plane. The Cronbach coefficient alpha was 1.00, 0.99 and 0.99 in sagittal, coronal and transvers plane, respectively. Conclusion: The SPM showed less than 1% error for static measurement, and showed reasonably similar pattern with the digital motion system. Application: The results of this study showed that the SPM can be the measuring method of spine pelvis motion that enhances the kinematic analysis of low back dynamics.

• Journal of Chest Surgery
• /
• 제49권4호
• /
• pp.287-291
• /
• 2016

Background: Spontaneous pneumomediastinum (SPM) is an uncommon disorder with only a few reported clinical studies. The goals of this study were to investigate the clinical manifestations and the natural course of S PM, as w ell as examine the current available treatment options for SPM. Methods: We retrospectively reviewed 91 patients diagnosed with SPM between January 2008 and June 2015. Results: The mean age of the patients was $22.7{\pm}13.2years$, and 67 (73.6%) were male. Chest pain (58, 37.2%) was the predominant symptom. The most frequent precipitating factor before developing SPM was a cough (15.4%), but the majority of patients (51, 56.0%) had no precipitating factors. Chest X-ray was diagnostic in 44 patients (48.4%), and chest computed tomography (CT) showed mediastinal air in all cases. Esophagography (10, 11.0%), esophagoduodenoscopy (1, 1.1%), and bronchoscopy (5, 5.5%) were performed selectively due to clinical suspicion, but no abnormal findings that implicated organ injury were documented. Twelve patients (13.2%) were discharged after a visit to the emergency room, and the others were admitted and received conservative treatment. The mean length of hospital stay was $3.0{\pm}1.6days$. There were no complications related to SPM except for recurrence in 2 patients (2.2%). Conclusion: SPM responds well to conservative treatment and follows a benign natural course. Hospitalization and aggressive treatment can be performed in selective cases.

• 핵의학기술
• /
• 제19권1호
• /
• pp.62-66
• /
• 2015

Brain PET/CT 검사는 뇌의 정신활동 뿐만 아니라 혈액의 관류상태, 에너지원의 대사상태, 생리적 활성물질의 섭취 정도를 관찰할 수 있으며 이를 통계적으로 분석하기 위한 다양한 데이터 비교 방법들이 적용되고 있다. 본 논문에서는 다양한 데이터 비교 방법들 중 SPM과 scenium의 유용성을 비교 평가 하였다. 2014년 3월부터 7월까지 서울대학교병원에서 18F-FDG PET/CT 검사를 시행 받은 15명(평균연령 $62.02{\pm}15.03$세, abnormal 10명, normal 5명)의 데이터를 분석하였다. 사용된 장비는 Siemens사의 Biograph Truepoint40 with TrueV이며 데이터 분석을 위하여 SPM99, syngo.via version VA30A, scenium version 4.0이 사용되었다. 검사는 $^{18}F-FDG$를 kg당 3.7MBq 주사하여 30분 후 brain emission 영상을 10분 획득하였다. 획득된 영상을 이용하여 영상 판독과 SPM, scenium 결과의 일치성을 5명의 핵의학과 판독의가 평가하였다. Scenium에서 parameter 변경에 따른 SUV와 SD 변화를 평가하기 위하여 환자 data 재구성시 iteration 4, 6, 8, gaussian filter 2mm, 4mm, 8mm, matrix size 168, 256, 336의 변화를 주어 재구성후 증감을 평가하였다. 마지막으로 3명의 방사선사가 두 software를 이용하여 평균 결과 분석 시간을 평가하였다. 영상 판독과 SPM 결과의 일치성은 normal 89.5%, abnormal 73.2%로 normal 환자에서 보다 높은 일치성을 보였으며 total 84.1%의 일치하는 것으로 나타났다. Scenium에서는 normal 92.1%, abnormal 93.0% 그리고 total 92.4%로 나타났다. Scenium에서 parameter 변경에 따른 SUV와 SD 변화 평가에서 iteration 횟수와 matrix size가 감소할수록 SUV와 SD 값은 iteration 변화에서 최대 0.59%, 8.73% 그리고 matrix size 변화에서 최대 0.88%, 8.25% 감소하였다. Gaussian filter변화에서는 FWHM이 증가할수록 SUV와 SD값은 최대 4.69%, 20.38% 감소하였다. 두 software를 이용한 평균 결과 분석 시간은 SPM 282초, scenium 116초로 scenium으로 결과 분석 시 SPM 사용 시 보다 58.% 시간이 감소되었다. 데이터 비교 평가 software들의 장단점을 충분히 이해하고 각 병원의 장비 환경과 실정에 맞는 software를 적용한다면 brain PET/CT 검사 시 보다 많은 정보를 제공할 수 있을 것으로 사료된다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권4호
• /
• pp.47-53
• /
• 2001

This study is to investigate the problem of the SPM(Skin Pass Mil7) system which is a finishing treatment of steel sheet. and to develop a PID control scheme to minimize process instability. An electrohydraulic servo system with conventional proportional controller used to regulate the force on the strip works inadequately to yield very undesirable transient responses at the moments welding parts of the strip conte into and pass through the rolls. Both linearized and nonlinear models of a typical SPM system ware simulated first by using Simulink. Then Ziegler-Nichols ultimate cycling method was used for an initial reference guide to tune PID gains, and further fine tuning was performed to get desirable response. The test result in the plant show that proposed PID control scheme successfully improves the process instability in a SPM system.

• 한국환경보건학회지
• /
• 제20권4호
• /
• pp.1-9
• /
• 1994

In order to investigate the regional level of air pollutants at Kangwha island situated on the western coast in Korea, the suspended particulate matter samples were collected by using the low volume air sampler on ten interval from March 1992 to February 1993 and the mass concentration of suspended particulate matter (SPM) and the chemical composition of water-soluble major ionic components in SPM samples were measured. During the sampling period, the average concentration of SPM under diameter 10 $\mu$m was found to be 48 $\mu$g/m$^3$ (+ 12). The seasonal concentration of SPM was showed in order of spring>fall>winter>summer. It was considered that higher concentration on spring than other season was affected by the long-range transport of Yellow sand particulate from China continent and lower concentration on summer by the washout and rainout effect of large rainfall. The content of water-soluble component in SPM samples was founded to be about 31% (14.69 $\mu$g/m$^3$) and 65% was unknown or unanalyzed. The content of cationic component showed in order of NH$_4^+$ (44.6%)>Na$^+$ (21.2%)>K$^+$ (14.7%)>Ca$^{2+}$ (13.6%)>Mg$^{2+}$ (5.9 %) and the content of anionic component SO$_4^{2-}$ (62.5%)>NO$_3^-$ (22.3%)>Cl$^-$ (15.2%), respectively. This fact indicates that ammonium and sulfate ion of water-soluble component in SPM sample were dominant in this region. From the chemical composition of water-soluble component, the most of Na$^+$, Mg$^{2+}$ and Cl$^-$ were originated from seawater source but K$^+$, Ca$^{2+}$ and SO$_4^{2-}$ were originated from other non-marine source. The contribution of seasalt to the composition of precipitation was 23%.

• 한국자기학회지
• /
• 제7권2호
• /
• pp.69-75
• /
• 1997

Mn-Zn 페라이트의 소결에 영향을 주는 산화물 첨가제와 자기이방성 상수( $K_{1}$)값이 zero가 되는 온도, $T_{spm}$를 결정해주는 산소분압을 변화시켜가며 전력손실, 미세구조, 초기투자율, 소결밀도, 온도에 따른 초기투자율의 변화를 관찰하였다. 산화물 첨가계는 초기투자율과 소결밀도를 증가시켰으며 동시에 낮은 전력손실을 나타내었다. 이러한 첨가제들은 입계에 석출되는 것으로 $T_{spm}$과 $T_{c}$(큐리온도)와 같은 자기적 성질을 변화시키지 않았다. 온도에 따른 초기투자율 변화는 냉각시 산소분압이 증가함에 따라 $T_{spm}$이 높은 온도로 이동함이 관찰되었다. 또한 냉각시 산소분압조절 만으로는 승온과 소결시 결정된 페라이트의 치밀화가 완전히 보정되지 못함도 확인되었다.확인되었다.

• Tuberculosis and Respiratory Diseases
• /
• 제59권6호
• /
• pp.696-699
• /
• 2005

SPM은 기저질환이나 외상의 과거력 없이 종격동에 기포가 생기는 질환으로 주로 젊은 연령에서 발생하며, 재발은 세계적으로 소수의 증례보고 위주로 되어 있다. 저자들은 특별한 유발 요인 없는 젊은 여자환자에서 27개월 간격으로 재발한 SPM를 경험하였고, 이는 국내에 보고된 바 없으며, 문헌고찰과 함께 보고하는 바이다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.665-666
• /
• 2015

In this paper, it is proposed to substitute the tilting operation device of hybrid multi-D.O.F system from three phase SPM to single phase torque actuator. When using tilting operation with three phase SPM which is appropriate for continuous rotary operation, there are disadvantages that electricity availability rate is low and controllability is difficult. On the other hand when using a single phase torque actuator instead of SPM, it is appropriate for sequential tilting, electricity availability rate is high, and it is easy to control. Thus this will have a great influence on the development and practical use of the system. This study designed a single phase torque actuator in consideration of the magnetic saturation. Also, this was verified with comparative analysis with SPM through FEM(finite element method) analysis values of the design model and test values of the manufactured model.