• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.4
• /
• pp.1-9
• /
• 2013

An active anti-ship missile decoy system was designed conceptually to analyze propulsion system requirements and feasibility to use a liquid bi-propellant rocket engine. Overall mass, size, and shape were assumed referring to specifications of Nulka which was developed by US and Australia in 1990s. The propulsion system was assumed to be a 1,000 N-class $H_2O_2$/kerosene rocket engine with a pressurized feed system. A three-degree-of-freedom optimal trajectory was calculated based on the assumptions, and mass budget was designed from the calculation results. It was found that the requirements for the propulsion system is that it shall be operated more than 100 sec; it shall be re-ignitable; it shall have a throttle capability of a range from 35% to 100% when the maximum thrust at sea level is 1,000 N.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.7 no.2
• /
• pp.93-100
• /
• 2009

This study has been carried out to look into the characteristics of an oxidative-dissolution of fission products (FP) co-dissolved with uranium (U) in a $(NH_4)_2CO_3$ carbonate solution. Simulated FP-oxides which contained 12 components have been added to the solution to examine their dissolution characteristics. It is found that $H_2O_2$ is an effective oxidant to minimize the oxidative-dissolution of FP. In the 0.5 M $(NH_4)_2CO_3$-0.5 M $H_2O_2$ solution, some elements such as Re, Te, Cs and Mo seem to be dissolved together with U, while 98${\pm}$2% for Re and Te, 94${\pm}$2% for Cs, and 29${\pm}$2 % for Mo are dissolved for 2 hours. It is revealed that dissolution rates of Re, Te and Cs are high (completely dissolved within 10${\sim}$20 minutes) due to their high solubility in the $(NH_4)_2CO_3$ solution regardless of the addition of $H_2O_2$, and independent of the concentrations of $Na_2CO_3$ and $H_2O_2$. However, the dissolution ratio of Mo seems to be slightly increased with time and about 33 % for 4 hours, indicating a very slow dissolution rate and also independent of the $(NH_4)_2CO_3$ concentration. It is found that the most important factor for the oxidative-dissolution of FP is the pH of the solution and an effective dissolution is achieved at a pH between 9${\sim}$10 in order to minimize the dissolution of FP.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.9
• /
• pp.1315-1319
• /
• 2012

Red pepper (Capsicum annuum L.) powder is widely used as a spice and flavor ingredient in the food industry. It is well known that during the drying process red pepper undergoes physico-chemical and nutritional changes. The objective of this study was to investigate the quality of red pepper powder according to drying method. Red pepper was dried by far-infrared drying, hot air drying, and polyethylene (PE) house drying. Average moisture content of dried red pepper powder from the three different drying methods was $12.5{\pm}0.3%$. The pH level slightly increased from 4.93 before drying to 5.00~5.54 after drying. Contents of capsaicinoids were highest (224.40 mg/100 g) in the PE house drying method and lowest (191.87 mg/100 g) in the hot air drying ($70^{\circ}C$) method. However, capsaicinoid contents were not significantly different among the various drying methods. Vitamin C content decreased as temperature increased. Drying conditions, particularly temperature, lead to loss of vitamin C in red pepper, resulting in quality degradation. Taken together, these results demonstrate that the content of vitamin C, one of the major factors affecting pepper powder quality, was affected by drying temperature.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.2
• /
• pp.183-193
• /
• 1995

Assuming that fishing nets are porous structures to suck water into their mouth and then filtrate water out of them, the flow resistance N of nets with wall area S under the velicity v was taken by $R=kSv^2$, and the coefficient k was derived as $$k=c\;Re^{-m}(\frac{S_n}{S_m})n(\frac{S_n}{S})$$ where $R_e$ is the Reynolds' number, $S_m$ the area of net mouth, $S_n$ the total area of net projected to the plane perpendicular to the water flow. Then, the propriety of the above equation and the values of c, m and n were investigated by the experimental results on plane nettings carried out hitherto. The value of c and m were fixed respectively by $240(kg\cdot sec^2/m^4)$ and 0.1 when the representative size on $R_e$ was taken by the ratio k of the volume of bars to the area of meshes, i. e., $$\lambda={\frac{\pi\;d^2}{21\;sin\;2\varphi}$$ where d is the diameter of bars, 21 the mesh size, and 2n the angle between two adjacent bars. The value of n was larger than 1.0 as 1.2 because the wakes occurring at the knots and bars increased the resistance by obstructing the filtration of water through the meshes. In case in which the influence of $R_e$ was negligible, the value of $cR_e\;^{-m}$ became a constant distinguished by the regions of the attack angle $ \theta$ of nettings to the water flow, i. e., 100$(kg\cdot sec^2/m^4)\;in\;45^{\circ}<\theta \leq90^{\circ}\;and\;100(S_m/S)^{0.6}\;(kg\cdot sec^2/m^4)\;in\;0^{\circ}<\theta \leq45^{\circ}$. Thus, the coefficient $k(kg\cdot sec^2/m^4)$ of plane nettings could be obtained by utilizing the above values with $S_m\;and\;S_n$ given respectively by $$S_m=S\;sin\theta$$ and $$S_n=\frac{d}{I}\;\cdot\;\frac{\sqrt{1-cos^2\varphi cos^2\theta}} {sin\varphi\;cos\varphi} \cdot S$$ But, on the occasion of $\theta=0^{\circ}$ k was decided by the roughness of netting surface and so expressed as $$k=9(\frac{d}{I\;cos\varphi})^{0.8}$$ In these results, however, the values of c and m were regarded to be not sufficiently exact because they were obtained from insufficient data and the actual nets had no use for k at $\theta=0^{\circ}$. Therefore, the exact expression of $k(kg\cdotsec^2/m^4)$, for actual nets could De made in the case of no influence of $R_e$ as follows; $$k=100(\frac{S_n}{S_m})^{1.2}\;(\frac{S_m}{S})\;.\;for\;45^{\circ}<\theta \leq90^{\circ}$$, $$k=100(\frac{S_n}{S_m})^{1.2}\;(\frac{S_m}{S})^{1.6}\;.\;for\;0^{\circ}<\theta \leq45^{\circ}$$

• Journal of Ginseng Research
• /
• v.14 no.3
• /
• pp.399-403
• /
• 1990

This study was undertaken to investigate the effect of ginseng total sapoin (GTS) on locomotor activity that had been increased by caffeine. Catecholamines, noradrenaline and dopamine, possible mediators for the locomotor activity, were measllred in the mouse whole brain, cortex and the re- mainder. The locomotor activity was measured in circlllar activity cages equipped with six light sources and photocells. The catecholamine contents in the mollse brain were determined by HPLC-fluorescence detection. GTS (50 and 100 mg/kg) reduced the increased locomotor activity by caffeine (25 mg/kg) dose-devendently. Caffeine increased the norevinephrint and dopamine in mouse whole brain and cortex dose-dependently. GTS reduced the norevinevhrine in the remainder, and reduced the dopamine in the cortex which had been increased by caffeine.

• Animal Systematics, Evolution and Diversity
• /
• v.32 no.4
• /
• pp.241-252
• /
• 2016

Out of the 12,100 slide-mounted specimens of Chironomidae collected throughout Korea from February 1977 to March 2016, 271 (2.2%) were from the genus Ablabesmyia (Diptera, Chironomidae, Tanypodinae). These 271 specimens were re-examined and eight species were identified, with three of these species shown to be new to science (A. hanea n. sp., A. microlongistyla n. sp., and A. paralongistyla n. sp.). It was discovered that A. monilis reported in 1981 and A. longistyla reported in 2009 had been misidentified, and corrected as A. prorasha in the present study. Among the eight species found from Korea, A. prorasha was predominant (37.8%), followed by A. longistyla (28.9%), and A. monilis (20.4%). A key of the eight species of Ablabesmyia found in Korea is provided.

• The KSFM Journal of Fluid Machinery
• /
• v.11 no.4
• /
• pp.14-21
• /
• 2008

The prediction for gaseous leak flows through a narrow crack is important for a leak-before-break (LBB) analysis. Therefore, the methodology to obtain the flow characteristics of gaseous leak flow in a narrow crack for the wide range by using the product of friction factor and Reynolds number correlations (fRe) for a micro-channel is developed and presented. The correlation applied here was proposed by the previous study. The fourth-order Runge-Kutta method was employed to integrate the nonlinear ordinary differential equation for the pressure and the regular-Falsi method was also employed to find the inlet Mach number. A narrow crack whose opening displacement ranges from 10 to $100{\mu}m$ with a crack length in the range from 2 to 200mm was chosen for sample prediction. The present results are compared with both numerical simulation results and available experimental measurements. The results are in excellent agreement with them. The leak flow rate can be approximately predicted by using proposed methodology.

• Progress in Superconductivity and Cryogenics
• /
• v.7 no.1
• /
• pp.17-20
• /
• 2005

We has designed, fabricated, and measured a Single flux quantum (SFQ) toggle flip-flop (TFF). The TFF is widely used in superconductive digital electronics circuits. Many digital devices, such as frequency counter, counting ADC and program counter be used TFF Specially, a program counter may be constructed based on TFF We have designed the newly TFF and obtained high bias margins on test. In this work, we used two circuit simulation tools, WRspice and Julia, as circuit optimization tools. We used XIC for a layout tool. Newly designed TFF had minimum bias margins of +/- $37\%$ and maximum bias margins of +/-$37\%$(enhanced from +/- $37\%$). The designed circuits were fabricated by using Nb technology The test results showed that the re-optimized TFF operated correctly on 100kHz and had a very wide bias margins of +/- $53\%$.

• Proceedings of the KIEE Conference
• /
• 2005.11a
• /
• pp.21-23
• /
• 2005

The electron transport coefficients, the electron drift velocity W, the longitudinal diffusion coefficient $ND_L$ in $C_{3}F_{8}-Ar$ mixture gases were measured by Double shutter drift tube and calculated by multi-term approximation of the Boltzmann equation over the wide E/N range from 0.03 to 100 Td. And an inelastic collision cross sections for $C_{3}F_{8}$ molecular gas were redetermined for quantitative characteristic analysis.

• Journal of Mechanical Science and Technology
• /
• v.18 no.10
• /
• pp.1869-1879
• /
• 2004

The present study has numerically investigated two-dimensional flow over three circular cylinders in an equidistant side-by-side arrangement at a low Reynolds number. For the study, numerical simulations are performed, using the immersed boundary method, in the range of g* < 5 at Re= 100, where g* is the spacing between two adjacent cylinder surfaces divided by the cylinder diameter. Results show that the flow characteristics significantly depend on the gap spacing and a total of five kinds of wake patterns are observed over the range: modulation-synchronized (g* (equation omitted) 2), inphase-synchronized (g* (equation omitted) 1.5) , flip-flopping (0.3 < g* (equation omitted) 1.2) , deflected (g* (equation omitted) 0.3), and single bluff-body patterns (g* < 0.3). Moreover, the parallel and symmetric modes are also observed depending on g* in the regime of the flip-flopping pattern. The corresponding flow fields and statistics are presented to verify the observations.