• Proceedings of the KSPS conference
• /
• 2007.05a
• /
• pp.307-310
• /
• 2007

In this paper, a packet loss concealment (PLC) algorithm for CELP-type speech coders is proposed to improve the quality of decoded speech under a burst packet loss condition. The proposed algorithm is based on the recovery of voiced excitation using an estimate of the voicing probability and the generation of random excitation by permutating the previously decoded excitation. The voicing probability is estimated from the correlation using the previous correctly decoded excitation and pitch. The proposed algorithm is implemented as a PLC algorithm for G.729 and its performance is compared with PLC employed in G.729 by means of perceptual evaluation of speech quality (PESQ) and an A-B preference test under the random and burst packet losses with rates of 3% and 5%. It is shown that the proposed algorithm provides better speech quality than the PLC of G.729, especially under burst pack losses.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.5
• /
• pp.517-525
• /
• 2007

This paper presents how to approximate an optimal shape of roll bending process in the fabrication of a curved shell plate. The roll bending process usually makes the cylindrical or conic shape from an initial flat plate. It means that the final shape is developable or its surface representation has zero Gaussian curvature. The fabrication shape is important in order to find process parameters of roil bending. An optimal concept is used to determine the developable fabrication shape which is in the closest proximity to the design surface or the given shell plate and is subject to developability. The results and the efficiency of this algorithm are evaluated by applying to some shell plates. Furthermore, the fabrication shape will be fundamental information for other process parameters of roll bending such as the vertical displacement of the center roller and the rolling directions.

• Journal of IKEEE
• /
• v.20 no.1
• /
• pp.16-25
• /
• 2016

Turnaround time (called, TAT) for imaging test, which is necessary for making a medical diagnosis, is directly related to the patient's waiting time and it is one of the important performance criteria for medical services. In this paper, we measured the TAT from major imaging tests to see it met the reference point set by the medical institutions. Prediction results from the algorithm of classification regression tree (called, CART) showed "clinics", "diagnosis", "modality", "test month" were identified as main factors for timely processing. This study had a contribution in providing means of prevention of the delay on medical services in advance.

• Annual Conference of KIPS
• /
• 2019.10a
• /
• pp.552-554
• /
• 2019

Deaf mutism (a hearing-impaired person and speech disorders) communicates using sign language. There are difficulties in communicating by voice. However, sign language can only be limited in communicating with people who know sign language because everyone doesn't use sign language when they communicate. In this paper, a finger language translation system is proposed and implemented as a means for the disabled and the non-disabled to communicate without difficulty. The proposed algorithm recognizes the finger language data by leap motion and self-learns the data using machine learning technology to increase recognition rate. We show performance improvement from the simulation results.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1429-1433
• /
• 2010

수공구조물의 설계, 수자원 관리계획의 수립, 재해영향 검토 등을 수행할 때, 재현기간에 따른 확률개념의 강우량, 홍수량, 저수량 등을 산정하여 사용하게 되며, 보통 대상지역의 장기 수문관측 자료를 이용하여 수문사상의 확률분포를 산정한 후 재현기간을 연장하여 원하는 설계빈도에 해당하는 양을 추정하게 된다. 미계측지역 또는 관측자료의 보유기간이 짧은 지역의 경우는 지역빈도 분석 결과를 이용하게 된다. 지역빈도해석을 위해서는 강우자료들의 동질성을 파악하는 것이 가장 기본적인 과정이 되며 이를 위해 통계학적인 범주화분석이 선행되어야 한다. 지점 빈도분석의 수문학적 동질성 판별을 위해 L-moment 방법, K-means 방법에 의한 군집분석 등이 주로 사용되며 관측소 위치좌표를 이용한 공간보간법을 적용하여 시각화하고 있다. 강수량은 시공간적으로 변하는 수문변량으로서 강수량의 시간적인 특성 또한 강수량의 특성을 정의하는데 매우 중요한 요소이다. 이러한 점에서 본 연구를 통해 강수지점의 공간적인 좌표 및 강수량의 양적인 범주화에 초점을 맞춘 기존 지역빈도분석의 범주화 과정에 덧붙여 시간적인 영향을 고려할 수 있는 요소들을 결정하고 이를 활용할 수 있는 범주화 과정을 제시하고자 한다. 즉, 극치강수량의 발생 시기에 대한 정량적인 분석이 가능한 순환통계기법을 이용하여 관측 지점별 시간 통계량을 산정하고, 이를 극치강수량과 결합하여 시 공간적인 특성자료를 생성한 후 이를 이용한 군집화 해석 모형을 개발하는데 연구의 목적이 있다. 분석 과정에 있어서 시간속성의 정량화 및 일반화는 순환통계기법을 사용하였으며, 극치강수량과 발생시점의 속성자료는 각각의 평균과 표준편차를 이용하였다. K-means 알고리즘을 이용해 결합자료를 군집화 하고, L-moment 방법으로 지역화 결과에 대한 검증을 수행하였다. 속성 결합 자료의 군집화 효과는 모의데이터 실험을 통해 확인하였으며, 우리 나라의 58개 기상관측소 자료를 이용하여 분석을 수행하였다. 예비해석 단계에서 100회의 군집분석을 통해 평균적인 centroid를 산정하고, 해당 값을 본 해석의 초기 centroid로 지정하여, 변동적인 클러스터링 경향을 안정화시켜 해석이 반복됨에 따라 군집화 결과가 달라지는 오류를 방지하였다. 또한 K-means 방법으로 계산된 군집별 공간거리 합의 크기에 따라 군집번호를 부여함으로써 군집의 번호순서대로 물리적인 연관성이 인접하도록 설정하였으며, 군집간의 경계선을 추출할 때 발생할 수 있는 오류를 방지하였다. 지역빈도분석 결과는 3차원 Spline 기법으로 도시하였다.

• Journal of Korean Society on Water Environment
• /
• v.27 no.1
• /
• pp.61-72
• /
• 2011

In order to assess hydrologic and nonpoint source pollutant behaviors in a watershed with Soil and Water Assessment Tool (SWAT) model, the accuracy evaluation of SWAT model should be conducted prior to the application of it to a watershed. When calibrating and validating hydrological components of SWAT model, the Nash-Sutcliffe efficiency coefficient (EI) has been widely used. However, the EI value has been known as it is affected sensitively by big numbers among the range of numbers. In this study, a Web-based flow clustering EI estimation system using K-means clustering algorithm was developed and used for SWAT hydrology evaluation. Even though the EI of total streamflow was high, the EI values of hydrologic components (i.e., direct runoff and baseflow) were not high. Also when the EI values of flow group I and II (i.e., low and high value group) clustered from direct runoff and baseflow were computed, respectively, the EI values of them were much lower with negative EI values for some flow group comparison. The SWAT auto-calibration tool estimated values also showed negative EI values for most flow group I and II of direct runoff and baseflow although EI value of total streamflow was high. The result obtained in this study indicates that the SWAT hydrology component should be calibrated until all four positive EI values for each flow group of direct runoff and baseflow are obtained for better accuracy both in direct runoff and baseflow.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.2
• /
• pp.760-771
• /
• 2012

In this paper, a blind spot of motor car, and the put case that is driven the miniature model motor system, when make practical application of the permanent magnet synchronous motors(PMSM) braking and having had the ability that can all absorb regenerative power by means of electric brake which is occurred. a tow system of a miniature model motor traction system is established by 1C1M methods to control individually permanent magnet synchronous motors (PMSM) of each motor. vector control method is applied in order to improve ride quality of motor car and the efficient use of energy. it was obtained excellent experiment results from the simulations as a function of momentum load and miniature model. Also, this study is investigated the regenerative braking power securities of permanent magnet synchronous motors, speed detection to stop electric brake at extremely very low speed and motor control method of algorithm.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.2
• /
• pp.87-93
• /
• 2014

Cadastral parcel objects as polygons are fundamental dataset which represent land administration and management of the real world. Thus it is necessary to assure topological seamlessness of cadastral datasets which means no overlaps or gaps between adjacent parcels. However, the problem of overlaps or gaps are frequently found due to non-coinciding edges between adjacent parcels. These erroneous edges are called uncertain edges, and polygons containing at least one uncertain edge are called uncertain polygons. In this paper, we proposed a new algorithm to efficiently search parcels of uncertain polygons between two adjacent cadastral datasets. The algorithm first selects points and polylines around adjacent datasets. Then the Constrained Delaunay Triangulation (CDT) is applied to extract triangles. These triangles are tagged by the number of the original cadastral datasets which intersected with the triangles. If the tagging value is zero, the area of triangles mean gaps, meanwhile, the value is two, the area means overlaps. Merging these triangles with the same tagging values according to adjacency analysis, uncertain edges and uncertain polygons could be found. We have performed experimental application of this automated derivation of partitioned boundary from a real land-cadastral dataset.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.5
• /
• pp.177-187
• /
• 2014

This paper proposes a fast subspace tracking methods, which is called GVFF FAPI, based on FAPI (Fast Approximated Power Iteration) method and GVFF RLS (Gradient-based Variable Forgetting Factor Recursive Lease Squares). Since the conventional FAPI uses a constant forgetting factor for estimating covariance matrix of source signals, it has difficulty in applying to non-stationary environments such as continuously changing DOAs of source signals. To overcome the drawback of conventioanl FAPI method, the GVFF FAPI uses the gradient-based variable forgetting factor derived from an improved means square error (MSE) analysis of RLS. In order to achieve the decreased subspace error in non-stationary environments, the GVFF-FAPI algorithm used an improved forgetting factor updating equation that can produce a fast decreasing forgetting factor when the gradient is positive and a slowly increasing forgetting factor when the gradient is negative. Our numerical simulations show that GVFF-FAPI algorithm offers lower subspace error and RMSE (Root Mean Square Error) of tracked DOAs of source signals than conventional FAPI based MUSIC (MUltiple SIgnal Classification).

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.6
• /
• pp.21-28
• /
• 2013

This paper proposes an effective fire detection approach that includes the following multiple heterogeneous algorithms: moving region detection using grey level histograms, color segmentation using fuzzy c-means clustering (FCM), feature extraction using a grey level co-occurrence matrix (GLCM), and fire classification using support vector machine (SVM). The proposed approach determines the optimal threshold values based on grey level histograms in order to detect moving regions, and then performs color segmentation in the CIE LAB color space by applying the FCM. These steps help to specify candidate regions of fire. We then extract features of fire using the GLCM and these features are used as inputs of SVM to classify fire or non-fire. We evaluate the proposed approach by comparing it with two state-of-the-art fire detection algorithms in terms of the fire detection rate (or percentages of true positive, PTP) and the false fire detection rate (or percentages of true negative, PTN). Experimental results indicated that the proposed approach outperformed conventional fire detection algorithms by yielding 97.94% for PTP and 4.63% for PTN, respectively.