• Korean Journal of Veterinary Research
• /
• v.21 no.2
• /
• pp.167-170
• /
• 1981

Changes in serum glutamic oxaloacetic transaminase (s-GOT) activities, serum alkaline phosphatase activities and serum total protein amounts were investigated on seven Korean native cows having normal estrus cycle of 18~24 days after normal parturition, dividing estrus cycle into estrus (0~1 days), metestrus (2~6 days), diestrus (7~16 days), proestrus (17~20 days). The results were as follows. 1. Serum GOT activities at estrus ranged from 73.5 to 121.5 Ku with a mean of $89.14{\pm}17.16$ Ku, at metestrus 57 to 89 Ku with a mean of $67.01{\pm}10.81$ Ku, at diestrus 54 to 89.5 Ku with a mean of $67.05{\pm}10.05$ Ku and at proestrus 53 to 112 Ku with a mean of $73.00{\pm}20.05$ Ku. The activities were significantly increased at the estrus comparing with other stages (P<0.01). 2. Serum ALP activities at estrus ranged from 8.0 to 10.4 K-Au with a mean of $8.74{\pm}0.83$ K-Au, at metestrus 6.5 to 9.2 K-Au with a mean of$7.74{\pm}0.76$ K-Au, at diestrus 5.6 to 9.0 K-Au with a mean of $7.67{\pm}1.13$ K-Au, at proestrus 6.2 to 9.3 K-Au with a mean of $7.12{\pm}1.18$ K-Au. The significance was not recognized among the stages of estrus cycle. 3. Serum total protein amounts at estrus ranged from 6.45 to 8.0g/10dl with a mean of $7.25{\pm}0.57/100dl$, at metestrus, 6.37 to 7.9g/100dl with a mean of $7.65{\pm}0.50g/100dl$, fat diestrus, 6.56 to 8.67g/100dl, with a mean of $7.53{\pm}0.55g/100dl$ and at proestrus 5.94 to 7.71g/100dl with a mean of $6.54{\pm}0.65g/dl$. There was not significance among the stages of estrus cycle.

• Steel and Composite Structures
• /
• v.27 no.1
• /
• pp.89-94
• /
• 2018

Uniaxial ratcheting behavior of Z2CND18.12N austenitic stainless steel used nuclear power plant piping material was studied. The results indicated that ratcheting strain increased with increasing of stress amplitude under the same mean stress and different stress amplitude, ratcheting strain increased with increasing of mean stress under the same stress amplitude and different mean stress. Based on least square method, a suitable method to arrest ratcheting by loading the materials was proposed, namely determined method of zero ratcheting strain rate. Zero ratcheting strain rate occur under specified mean stress and stress amplitudes. Moreover, three dimensional ratcheting boundary surface graph was established with stress amplitude, mean stress and ratcheting strain rate. This represents a graphical surface zone to study the ratcheting strain rates for various mean stress and stress amplitude combinations. The graph showed the ratcheting behavior under various combinations of mean and amplitude stresses. The graph was also expressed with the help of experimental results of certain sets of mean and stress amplitude conditions. Further, experimentation cost and time can be saved.

• Journal of Power System Engineering
• /
• v.4 no.4
• /
• pp.25-31
• /
• 2000

This paper represents the vector fields and three dimensional mean velocities in the X-Y plane of cone type swirl gas burner measured by using X-probe from the hot-wire anemometer system. This experiment is carried out at flowrate 350 and $450{\ell}/min$ respectively in the test section of subsonic wind tunnel. The vector plot shows that the maximum axial mean velocity component is focused in the narrow slits distributed radially on the edge of a cone type swirl burner, for that reason, there is some entrainment of ambient air in the outer region of the burner and the rotational flow can be shown in the inner region of the burner because mean velocity W is distributed about twice as large as mean velocity V due to inclined flow velocity ejecting from the swirl vanes of a cone type baffle plate of burner. Moreover, the mean velocities are largely distributed near the outer region of burner within $X/R{\fallingdotseq}1.5$, hence, the turbulent characteristics are anticipated to be distributed largely in the center of this region due to the large inclination of mean velocity and swirl effect.

• Korean Journal of Veterinary Research
• /
• v.14 no.2
• /
• pp.179-184
• /
• 1974

The blood picture of 85 healthy race horses in Korea was investigated. The ranges and mean values of erythrocyte, hemoglobin, hematocrit value, mean corpuscular volume, mean corpuscular hemoglobin concentration, and total white blood cell count in the blood picture were determine. The respective mean value and standard deviation and age differences were as follows: 1. The erythrobyte count was shown as range of 6.20 to $11.32{\times}10^6/mm^3$ with mean of $8.61{\pm}1.92{\times}10^6/mm^3$(SD). The leucocyte count was shown as range 5.0 to $18.0{\times}10^3/mm^3$ with mean of $8.25{\pm}1.51{\times}10^3/mm^3$(SD). There were not significant. differences in age, 2. The mean value of hemoglobin was shown $13.9{\pm}1.7g/100ml(SD)$ ranging 9.8 to 16.8g/100ml. The mean value of hematocrit was shown $40.9{\pm}3.94ml/100ml(SD)$ ranging 26 to 54. There were not significant differences in age. 3. The mean corpuscular hemoglobin was shown as range of 11.8 to 22.2pg with mean of $16.9{\pm}4.69$(SD). The mean corpuscular volume was shown as range of 34.5 to $71.3cu{\mu}$ with mean of $49.0{\pm}7.32cu{\mu}$(SD). The mean corpuscular hemoglobin concentration was shown as range of 30.6 to 39.4 g/100 ml with mean of $34.6{\pm}2.36$(SD). There were not significant differences in age. 4. The correlation among erythrocyte count, hemoglobin and hematocrit value were observed as follows: Erythrocyte count and hemoglobin (+0.328), rythrocyte count and hematocrit vague (+0.319). A linear regression equation was shown as follows: Erythrocyte count and hemoglobin (Y=0.336x+10.977), erythrocyte count and hematocrit value (Y=0.655x+35.274). 5. The high correlation between hemoglobin and hematocrit vague was observed (r= +0.836). A linear regression equation was shown: (Y=1.948x+13.895).

• Journal of the Korean Society of Safety
• /
• v.14 no.2
• /
• pp.155-162
• /
• 1999

reliability from components reliability. In this case, it assumes that components failure is mutually independent, but it may not true in real systems. In this study, the mean cost per unit time is computed as the ratio of mean life to the mean cost. The mean life is obtained by the reliability function under power rule model. The mean cost is obtained by the mathematical model based on the inspection interval. A heuristic method is proposed to determine the optimal number of redundant units and the optimal inspection interval to minimize the mean cost per unit time. The assumptions of this study are as following : First, in the load-sharing k-out-of-n:G system, total loads are applied to the system and shared by the operating components. Secondly, the number of failed components affects the failure rate of surviving components as a function of the total load applied. Finally, the relation between the load and the failure rate of surviving components is set by the power rule model. For the practical application of the above methods, numerical examples are presented.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.10 no.4
• /
• pp.177-183
• /
• 2002

A pulsed tracer gas technique is applied to measure the distributions of local mean age and local mean residual-life-time of air in a half-scale experimental chamber, The airflow patterns in the chamber are visualized by a Helium bubble generator for three different exhaust locations. A supply slot is located at the top of a right wall, and an exhaust slot is at either bottom-left (Case 1), bottom-right (Case 2), or top-left (Case 3) location. Results show that the distributions of local mean age and local mean residual-life-time are different from each other, but both of them are closely related to the airflow pattern in the space. Included are discussions on explaining the variations of overall room ventilation effectiveness depending upon airflow rates for three different supply-exhaust configurations.

• Communications of the Korean Mathematical Society
• /
• v.29 no.1
• /
• pp.205-212
• /
• 2014

This paper investigates mean square exponential dissipativity of singularly perturbed stochastic delay differential equations. The L-operator delay differential inequality and stochastic analysis technique are used to establish sufficient conditions ensuring the mean square exponential dissipativity of singularly perturbed stochastic delay differential equations for sufficiently small ${\varepsilon}$ > 0. An example is presented to illustrate the efficiency of the obtained results.

• Bulletin of the Korean Mathematical Society
• /
• v.49 no.6
• /
• pp.1327-1334
• /
• 2012

In this paper, using analytic method and the properties of the Legendre's symbol, we prove an exact calculating formula on the $2m$-th power mean value of the generalized quadratic Gauss sums for $m{\geq}2$. This solves a conjecture of He and Zhang [On the 2k-th power mean value of the generalized quadratic Gauss sums, Bull. Korean Math. Soc. 48 (2011), no. 1, 9-15].

• The Journal of Korean Physical Therapy
• /
• v.16 no.2
• /
• pp.108-115
• /
• 2004

The aim of this study is to present the basic reference data of age and specipic gait parameters for comparisons of the gait characteristics depended on Unilateral Trans-Femoral or Trans-Tibial Prostheses. The basic gait parameters were extracted from 10 Adult, 10 above knee(A/K) patients and 10 below knee(B/K) patients, 50 to 60 years of age using VICON 512 Motion Analyzer. The results were as follows; 1) The mean Cadence of the above knee(A/K) patients and below knee(B/K) patients were $87.77{\pm}8.64$ steps/min, to $99.84{\pm}11.14$ steps/min.(p<0.05) 2) The mean Walking Speed of the above knee(A/K) patients and below knee(B/K) patients were $0.84{\pm}0.15$ m/s, to $0.96{\pm}0.25$ m/s.(p>0.05) 3) The mean Stride Length of the above knee(A/K) patients and below knee(B/K) patients were $1.14{\pm}0.14$ m, to $1.14{\pm}0.22$m.(p>0.05) 4) The mean maximal angles of joint on the hip flexion motion for different above knee(A/K) patients and below knee(B/K) patients were $34.75{\pm}10.18_{\circ}$, to $32.32{\pm}6.34_{\circ}$ .(p>0.05) 5) The mean maximal angles of joint on the knee flexion motion for different above knee(A/K) patients and below knee(B/K) patients were $66.97{\pm}15.08_{\circ}$, to $52.65{\pm}9.21_{\circ}$ .(p<0.05) 6) The mean maximal angles of joint on the ankle dorsiflexion motion for different above knee(A/K) patients and below knee(B/K) patients were $14.41{\pm}4.82_{\circ}$, to $10.04{\pm}3.49_{\circ}$ .(p>0.05) 7) The mean maximal angles of joint on the ankle plantarflexion motion for different above knee(A/K) patients and below knee(B/K) patients were $5.77{\pm}3.17_{\circ}$, to $2.75{\pm}4.49_{\circ}$ .(p>0.05)

• Journal of Positioning, Navigation, and Timing
• /
• v.5 no.2
• /
• pp.75-85
• /
• 2016

The performance of up-to-date mapping functions and various mean temperature equations were analyzed to derive optimal mapping function and mean temperature equation when GNSS precipitable water vapor (PWV) was investigated in the Korean Peninsula. Bernese GNSS Software 5.2, which can perform high precision GNSS data processing, was used for accurate analysis, and zenith total delay (ZTD) required to calculate PWV was estimated via the Precise Point Positioning (PPP) method. GNSS, radiosonde, and meteorological data from 2009 to 2014 were acquired from Sokcho Observatory and used. ZTDs estimated by applying the global mapping function (GMF) and Vienna mapping function 1 (VMF1) were compared with each other in order to evaluate the performance of the mapping functions. To assess the performance of mean temperature equations, GNSS PWV was calculated by using six mean temperature equations and a difference with radiosonde PWV was investigated. Conclusively, accuracy of data processing was improved more when using VMF1 than using GMF. A mean temperature equation proposed by Wu (2003) had the smallest difference with that in the radiosonde in the analysis including all seasons. In summer, a mean temperature equation proposed by Song & Grejner-Brzezinska (2009) had the closest results with that of radiosonde. In winter, a mean temperature equation proposed by Song (2009) showed the closest results with that of radiosonde.