• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.11
• /
• pp.74-84
• /
• 2000

This paper deals with procedures for design and implementation of a DSP, which is compatible with TMS320C30 DSP. CBS(Cycle Based Simulator) is developed to study the architecture of the target DSP. The simulator gives us detailed information such as function block operation, control signal values, register condition, bus and memory values when a instruction is being carried out. RTL design is carried out by VHDL. Logic simulation and hardware emulation are employed to verify proper operation of the design. The DSP is fabricated with 0.6${\mu}m$ CMOS technology. The Chip has 450,000 gates complexity, $9{\times}9mm^2$ area, 20 MIPS operation speed. It is confirmed by running 109 instructions out of 114 instructions and 13 kinds of algorithm that the developed DSP has compatibility with TMS320C30.

• Journal of the Korea Convergence Society
• /
• v.11 no.5
• /
• pp.327-333
• /
• 2020

The aims of this study was to verify the validity using group comparison method and test/retest reliability of the Communication Behavior Scale for Nurses Caring for People with Dementia(CBS-D). The subjects were nurses who have worked at elderly care facilities in D, U and Y cities(n = 67), and nurses who have worked at general hospitals in D and U cities. The scores of the communication behaviors of nurses working in elderly care facilities were significantly higher than those of nurses working in general hospitals(t=2.49, p=.014). The Intraclass Correlation Coefficients for the test-retest reliability test was .813. Therefore, it was confirmed that CBS-D is an appropriate evaluation tool for evaluating the level of the nurse's communication behavior through various logical analyzes, and it is expected that it can be used in various ways for nursing care for people with dementia.

• Annals of Rehabilitation Medicine
• /
• v.42 no.6
• /
• pp.788-797
• /
• 2018

Objective To investigate the effect of upper limb rehabilitation combining robot with low-frequency repetitive transcranial magnetic stimulation (rTMS) on unilateral spatial neglect in stroke patients. Methods Patients who had hemispatial neglect after right hemisphere stroke were randomly divided into rTMS only group, robot only group, and combined group. All groups received conventional neglect therapy and additional treatment for each group. rTMS group received rTMS therapy. Robot group received robot therapy, while combined group received both therapies. The effect of therapy was assessed with Motor-Free Visual Perception Test-3 (MVPT-3), line bisection test, star cancellation test, Catherine Bergego Scale (CBS), Mini-Mental State Examination (MMSE), and the Korean version of Modified Barthel Index (K-MBI). These measurements were evaluated before and after treatment. Results For each group, 10 patients were recruited. There were no significant differences in baseline characteristics or initial values among the three groups. Two weeks after the therapy, all groups showed significant improvement in MVPT-3, line bisection test, star cancellation test, CBS, MMSE, and K-MBI. However, changes in measurements showed no significant differences among groups. Conclusion Treatment effect of the combined therapy of robotic therapy and low-frequency rTMS therapy for hemispatial neglect was not statistically different from that of each single treatment. Results of this study did not prove the superiority of any of the three treatments. Further study with large number of patients is needed to evaluate the superiority of these treatments.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.2
• /
• pp.45-53
• /
• 2020

Blockchain can control transactions in a decentralized way and is already being considered for manufacturing, finance, banking, logistics, and medical industries due to its advantages such as transparency, security, and flexibility. And it is predicted to have a great economic effect. However, Blockchain has a Trilemma that is difficult to simultaneously improve scalability, decentralization and security characteristics. Among them, the biggest limitation of blockchain is scalability, which is very difficult to cope with the constantly increasing number of transactions and nodes. To make the blockchain scalable, higher performance should be achieved by modifying existing consensus methods or by improving the characteristics and network efficiency that affect many ways of scaling. Therefore, in this paper, we propose a cluster-based scalable PBFT consensus algorithm called CBS-PBFT which reduces the message complexity O(n²) of PBFT to O(n), which is a representative consensus algorithm of blockchain, and the validity is verified through simulation experiments.

• The korean journal of orthodontics
• /
• v.30 no.5 s.82
• /
• pp.625-642
• /
• 2000

The purpose of this study is to evaluate the effects of mechanical and thermal fatigue stress on the shear, tensile and shear-tensile combined bond strengths(SBS, TBS, CBS) in various orthodontic brackets bonded to human premolars with chemically cured adhesive(Ortho-one, Bisco, USA). Five types of commercially available metal brackets with various bracket base configurations of Photoetched base(Tomy, Japan), Non-Etched Foil Mesh base(Dentaurum, Germany), Micro-Etched Foil Mesh base(Ortho Organizers, USA), Chessboard base(Daesung, Korea), and Integral base(3M Unitek, USA) were used. Samples were divided into 3 groups, the first group was acted with shear-tensile combined loads($45^{\circ}$) of 200g for 4 weeks(mechanical fatigue stress), the second group was subjected to the 5,000 thermocycles of 15 second dwell time each in $5^{\circ}C\;and\;55^{\circ}C$ baths(thermal fatigue stress), and the third group was the control. Bond strengths were measured at the crosshead speed of 0.5mm/min. The cross-section of bracket base/adhesive interface and the fracture surface were examined with the stereoscope and the scanning electron microscope. The resin remnant on bracket base surface was assessed by ART(Adhesive Remnant Index). The obtained results were summarized as follows, 1. In static bond strength, Photoetched base bracket showed the maximum bond strength and Integral base bracket showed the minimum bond strength(p<0.05). In all brackets, shear bond strength(SBS) was in the greatest value and shear-tensile combined strength(CBS) was in the least value(p<0.05). 2. After mechanical fatigue test, Photoetched base bracket showed the maximum bond strength and Integral base bracket showed the minimum bond strength(p<0.05). In Photoetched base bracket and Micro-Etched Foil Mesh base bracket, shear bond strength(SBS), tensile bond strength(TBS) and shear-tensile combined strength(CBS) were decreased after mechanical fatigue test(p

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1374-1375
• /
• 2011

Mixed combustion expert system is implemented to prevent various problems in combustion process by increasing rate of mixing low calorific value coal to reduce costs. This system shows optimal coal mixture rate by interfacing CBS(Coal Blending Screener, Implementing slagging and fouling factors by coal characteristic and algorithm), SGE(Stream Generate Expert, Combustion process model) and CFS(Configured Fireside Simulator, Computational fluid dynamics).

• Journal of Microbiology and Biotechnology
• /
• v.10 no.4
• /
• pp.564-567
• /
• 2000

A recombinant Saccharomyces cerevisiae, transformed with the genes encoding xylose reductase (XYL1) and xylitol dehydrogenase (XYL2) orginated from Pichia stipitis CBS 5776, was developed to directly convert xylose to ethanol. A fed-batch fermentation with the recombinant yeast produced 8.7 g ethanol/l with a yield of 0.13 g ethanol/g xylose consumed.

• Elastomers and Composites
• /
• v.34 no.3
• /
• pp.262-268
• /
• 1999

Effect of carbon blacks (CBs) on the stress relaxation and the elastic recovery of uncrosslinked natural rubber (NR) was examined. It was found that if the type of CB is characterized by smaller size and higher structure, the stress relaxation is more delayed and the elastic recovery becomes more active. These results are attributed to the degree of bound rubber, i.e., the interaction between NR and CB.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2012.11a
• /
• pp.249-251
• /
• 2012

최근 대형 재난의 증가로 안전에 대한 관심이 증가하고 있는데 이러한 재난을 대비하기 위해서는 효과적, 효율적인 재난방송이 필요하다. 재난방송을 수신할 수 있는 단말 중에 휴대전화, 내비게이션 등의 휴대용 단말은 정전 상황에서도 이용할 수 있어 특히 유용하다. 본 논문에서는 휴대용 단말에서 이용할 수 있는 재난정보전달 기술을 분석하여 장단점을 평가하였다. 이를 위해 지상파DMB 재난경보방송과 스마트폰 어플리케이션, CBS(Cell Broadcasting System) 재난문자방송과 최근 연구 중인 자동인지 T-DMB 재난방송을 분석하고, 재난방송에서 중요한 특성인 안정성, 효율성, 자동인지(wake-up), 지역맞춤 서비스 등의 항목에 대해 평가하였다. 평가 결과 모든 특성을 만족하는 기술은 없어 복수의 기술을 동시에 적용하여 장점을 활용하는 방안과, 이에 따른 중복 수신 문제를 해결하기 위한 연구 및 협력이 필요하다는 결론과 차세대 재난방송 서비스인 자동인지 T-DMB 재난방송에서 이와 같은 특성을 만족시키고 빠른 시일 내에 보급 및 확산이 필요하다는 결론을 도출하였다.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.3
• /
• pp.917-924
• /
• 2012

The conformational study of glycerol has been carried out using the M06-2X/cc-pVTZ level of theory in the gas phase and the SMD M06-2X/cc-pVTZ level of theory in water in order to understand its conformational preferences and solvation effects. Most of the preferred conformers of glycerol have two $C_5$ hydrogen bonds in the gas phase, as found by the analysis of calorimetric data. It has been known that the solvation drove the hydrogen bonds of glycerol to be weaker and its potential surface to be fatter and that glycerol exists as an ensemble of many feasible local minima in water. The calculated populations of glycerol in the gas phase and in water are consistent with the observed values, which are better than the previously calculated ones at the G2(MP2), CBS-QB3, and SM5.42 HF/6-31G(d) levels of theory.