• Journal of the Ergonomics Society of Korea
• /
• v.33 no.6
• /
• pp.515-532
• /
• 2014

Objective: The purpose of this study is to define consumers' affection on the interior design of commercial cars in terms of its design factors: color, embossing and gloss as independent factors. Background: Existing affective studies related to interior of vehicle focus on just sedans. However, there is no affective study about the interior of commercial cars. In addition, it is hard to change levels to which manufactures want. Method: Representative design factors were drawn using ANOVA and SNK analysis and definitive affective vocabularies were drawn using factor analysis. Furthermore, the results of 3D experiment were analyzed using ANOVA and LSD analysis. 3D images for the experiment were made using 3D max program. The experiment revealed that consumers discerned the differences in levels of each design factor and affective vocabulary. Results: The ANOVA revealed that beige color "A" type and non-gloss were the most preferred design in terms of the affective vocabularies and total preference. Conclusion: The result of the experiment may help manufactures to design the interior of commercial cars in the near future. Furthermore, the ANOVA result of affective vocabularies evaluation is expected to suggest a meaningful guideline. Application: The study results may be utilized as a guideline for interior design of commercial cars.

• The Journal of Pediatrics of Korean Medicine
• /
• v.32 no.4
• /
• pp.42-50
• /
• 2018

Objectives The purpose of this study is to report a case of one autism spectrum disorder child who was treated by Korean medicine treatment. Methods The subject was a male child with autism spectrum disorder. This patient was treated with oriental herbal medicine and acupuncture. The improvement was observed by K-CARS. Results Korean medicine treatment relieved an autism spectrum disorder child's symptoms. For example, emotional excitement, hyperactivity disorder and repetition behavior are improved. K-CARS score at the initial stage of the treatment was 48 points, which can be considered as severe autistic. After 27 months of the treatment, the K-CARS was 26 points which is not autistic. There was no side effect reported. Conclusions This study showed that Korean medicine can be an effective treatment option for autism spectrum disorder.

• 한국연소학회:학술대회논문집
• /
• 1997.06a
• /
• pp.33-44
• /
• 1997

연소상태의 온도를 이동하면서 측정할 수 있는 광대역 코헤런트 반스톡스 라만 분광기를 제작하였다. 분광기의 온도 측정 정확도를 향상시키기 위하여 무모드레이저를 제작하여 스톡스광으로 사용하였다. 이동형 CARS 분광기에 적합하도록 CARS신호 측정용 단색기를 제작하여 분광기 내부에 설치 하였다. CARS 분광기의 온도 측정의 정확도를 알아보려고 흑연관 전기로를 이용하여 표준 복사온도계와 CARS 분광기로 측정한 온도의 차이를 측정하였다. 장치의 온도 정확도는 1000 K - 2400 K 사이의 온도영역에서 2%이내 였다. 무모드 색소레이저의 출력 스펙트럼의 시간에 따른 안정도를 측정하여 온도측정에 미치는 오차를 조사한 결과 1500 K에서 5 시간 동안 1.5 %이내 였다. 평면 화염 버너에서 프로판공기 예혼합 화염의 온도 분포를 측정하여 이 장치의 응용 가능성을 확인하였다.

• International Journal of Control, Automation, and Systems
• /
• v.6 no.2
• /
• pp.278-281
• /
• 2008

Linear motor (LM) based shuttle cars will play an important role in the future transportation systems of marine terminals to cope with increasing container flows. These systems are known as agile port terminals because of their significant advantages. However, routing for multiple shuttle cars is still an open issue. We present a network model of a container yard and propose constrained dynamic programming (DP) for its routing strategy with collision avoidance. The algorithm is a modified version of typical DP which is used to find an optimal path for a single traveler. We evaluate the new algorithm through simulation results for three shuttle cars in a mesh-type container yard.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1997.04a
• /
• pp.81-85
• /
• 1997

In a virtual environment, agents must demonstrate some degree of realism and interactivity. This paper discusses the algorithm that enables agents to navigate a virtual road network realistically and interactively. The road description files written in this language provide the information of road environments to the navigating agents and the scene visualizer. We call this navigating agent in the road an ambient car. The ambient cars must follow the traffic rules as human does. To do this, the ambient car should continuously check its circumstances, such as, the traffic lights, lanes, road signs, and other ambient cars. Because of the huge scale of road network and the large number of ambient cars, the algorithm considers only the area where the participant is currently located. By this locality, the performance of the whole system does not fluctuate much in different situations. The behavior of ambient cars according to the predefined rules may appear monotonous. We added probability distribution functions to introduce some randomness. We implemented the above idea on silicon Graphics Indigo 2 workstation. The ambient car exhibited its awareness of lanes, traffic lights, and other cars. The participants could hardly distinguish between a human-controlled car and computer-controlled ambient car generated by the algorithm.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.4
• /
• pp.667-675
• /
• 2016

The goal of this study is to be used as baseline data for transportation demand management. At the present time the number of registered car and householding car is increasing, so there is a need to analyze the car ownership pattern through household car hold status. Also, it is necessary to analyze the factor of increasing car. The research is proceeded with classifying as the household which is holding private cars or holding passenger cars and non passenger cars based on the result of the research of the household travel survey data. The result of this study is shown as follows. According to car ownership pattern, there are more households holding passenger cars only when they are holding less than 2 cars. Otherwise there are more households holding passenger car and non passenger car when they are holding more than 3 cars. Using the Ordered Logit Model, there are more differences in factors affects holding cars by variables of housing type and household properties.

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.5
• /
• pp.270-274
• /
• 2014

Currently, LED headlamps are only attached to newly manufactured vehicles, and it remains difficult to mount LED headlamps on used cars. Therefore LED headlamps need to be developed for used cars as a replacement of their halogen lamps. Due to a number of spatial limitations, it is critical to ensure a certain level of thermal performance. In order to obtain a design for efficient heat radiation, this paper aimed to optimize thermal management through a combination of heat sinks, heat pipes and fans. Based on such a design, this paper succeeded in developing LED headlamps of the desired performance to replace the halogen bulbs of used cars.

• Journal of ILASS-Korea
• /
• v.21 no.4
• /
• pp.223-236
• /
• 2016

On-road source emissions are major air pollutants and have been associated with serious health effects in Seoul metropolis. Thus, it is of fundamental importance to have an accurate assessment of vehicle emissions in order to implement an effective air quality management policy. As a result, there is a need to overview vehicle emission characteristics of air pollutants. This article discusses vehicle exhaust sampling and chemical analysis, emission characteristics of air pollutants, and emission regulations from passenger cars. The vehicle exhaust sampling and chemical analysis methods were described in particulate matter and gaseous compounds. In this article, chassis dynamometer, measurement instrumentation for nano-particulate matter and carbon compounds analysis device were described. For the gasoline and diesel vehicles, the effective parameters of emissions were average vehicle speed, vehicle mileage and model year. The particle number emissions for diesel nano-particles were sensitive to the sampling conditions. Also, the particle number emissions with a diesel particle filter (DPF) largely reduced rather than those without it. This article also describes different emission characteristics of air pollutants according to biodiesel or bioethanol mixing ratio. The Korean emission standards for passenger cars were compared with those of the US and EU. Finally, the objective is to give an overview of relevant background information on emission characteristics of air pollutants from passenger cars in Korea.

• Korean Journal of Optics and Photonics
• /
• v.18 no.4
• /
• pp.286-291
• /
• 2007

We theoretically investigated the far-field radiation pattern of epi-signal from a polystyrene sphere in coherent anti-Stokes Raman scattering (CARS) microscopy with an objective lens of high numerical aperture. We calculated the field distribution of the incident laser beams under the tight-focusing condition and the far-field radiation pattern through coherent addition of radiation from the nonlinear polarizations (Hertzian dipoles) as the origin of CARS signal generation. The epi-radiation patterns for polystyrene spheres of different diameters are calculated, and the pattern of a sphere is also compared with that of a shell fer a diameter of 1100 nm. We finally show how the radiation pattern of the polystyrene sphere changes as the center of the sphere shifts from the focus of the beam.

• Journal of IKEEE
• /
• v.21 no.3
• /
• pp.174-184
• /
• 2017

This paper proposes a torque predictive control for dynamic performance improvement of clamping force in electro-mechanical brake (EMB) for railroad cars. In general, pneumatic braking system (PBS) is used for railroad cars. It is sensitive depending on environmental changes and it has increasing idle running time because of slow dynamic response. Additionally, the PBS has low braking efficiency in case braking torque more than standard value is applied to the brake system such as emergency braking. In order to overcome these disadvantages of the PBS, the EMB is used for the railroad cars. The EMB for railroad cars has advantages that increasing the fuel efficiency and design flexibility because it is able to decrease vehicle weight of railroad cars and secure space for design. In this paper, control method for dynamic performance improvement of clamping force in EMB for railroad car is proposed. The effectiveness of the proposed control method is verified by the simulation results.