• 제목/요약/키워드: K-9 SPH

검색결과 8건 처리시간 0.025초

SPH 기법을 이용한 Rock-berm의 앵커 충돌 수치 시뮬레이션 (Anchor Collision Simulation of Rock-berm using SPH Technique)

  • 우진호;나원배;유정석
    • 한국해안·해양공학회논문집
    • /
    • 제26권1호
    • /
    • pp.9-15
    • /
    • 2014
  • 암석과 같은 입자들로 구성된 구조체의 거동을 일반적인 요소망을 이용한 유한요소해석으로 구현하기 어렵다. 이는 입자로 구성된 구조체의 거동 해석시 입자간의 상호작용을 무시할 수 없기 때문이다. 본 연구에서는 입자로 구성된 구조체(rock-berm)의 분할에 Smooth Particle Hydrodynamics (SPH) 기법을 이용하여 충돌해석을 수행하고 이를 기존의 Lagrange 기법을 사용한 해석결과와 비교하여 SPH 기법의 적용 가능성을 알아보았다. 결과적으로 SPH 기법이 입자로 구성된 구조체의 충돌해석에 사실적인 모사가 가능한 것으로 파악되었다.

Comparison of different iterative schemes for ISPH based on Rankine source solution

  • Zheng, Xing;Ma, Qing-wei;Duan, Wen-yang
    • International Journal of Naval Architecture and Ocean Engineering
    • /
    • 제9권4호
    • /
    • pp.390-403
    • /
    • 2017
  • Smoothed Particle Hydrodynamics (SPH) method has a good adaptability for the simulation of free surface flow problems. There are two forms of SPH. One is weak compressible SPH and the other one is incompressible SPH (ISPH). Compared with the former one, ISPH method performs better in many cases. ISPH based on Rankine source solution can perform better than traditional ISPH, as it can use larger stepping length by avoiding the second order derivative in pressure Poisson equation. However, ISPH_R method needs to solve the sparse linear matrix for pressure Poisson equation, which is one of the most expensive parts during one time stepping calculation. Iterative methods are normally used for solving Poisson equation with large particle numbers. However, there are many iterative methods available and the question for using which one is still open. In this paper, three iterative methods, CGS, Bi-CGstab and GMRES are compared, which are suitable and typical for large unsymmetrical sparse matrix solutions. According to the numerical tests on different cases, still water test, dam breaking, violent tank sloshing, solitary wave slamming, the GMRES method is more efficient than CGS and Bi-CGstab for ISPH method.

인상채득 후 경화시 트레이의 위치에 따른 주모형의 변화 (Change master cast by hardening method to position of tray after impression taking)

  • 이정애
    • 한국치위생학회지
    • /
    • 제8권2호
    • /
    • pp.53-66
    • /
    • 2008
  • There was to purpose of this study improves analyzing cause that prosthesis brings bite engaging that is inaccurate in patient's mouth, when supposed that all conducts that do in operatory and dental laboratory are perfect. Impression did check bite by alginate impression material and polymerization style silicon impression material that use usually in presence at a sickbed Irreversibility, hydrocolloid, alginate impression material washed in flowing water and poured anhydrite after wait about 8 minutes so that region that charge interest after impression check bite may become undoing. And hydrophile property addition polymerization style impression material poured anhydrite after blow 30 considering impression material dwell time and H2 gas occurrence time (5~15 minute) after have washed in flowing water. I got each 7 models, result that manufactures total 28 and measures by third dimension measuring instrument (Meteo, Korea) following sequence curing in tray holder and floor 1, By Alginate impression when is hardened in tray holder and when is hardened in the floor after do check bite, SPH 4, SPH5 all as there is synonymy appeared(P<0.05). By in case do not use average 0.1741 in case use tray holder in 0.0447 SPH5s in case do not use average 0.2838 pastas in case use tray holder in SPH4 0.0309, When did not use both SPH4 and SPH5 tray holder, when used tray holder, 1 appeared more greatly. 2. By amity sex addition polymerization style silicon impression when is hardened in tray holder after do check bite and when is hardened in the floor SPH 4, a11 of the SPH5s very big synonymy be(P>0.05). And in case use tray holder in 0.000657 pasta SPH5s in case do not use average 0.000129 pastas in case use tray holder in SPH4 average 0.000114 pastas, by in case do not use 0.000757, I appeared more greatly when used tray when did not use both SPH4 and SPH5 tray holder, but 1 appeared is not level to keep in mind(Table 8~9). 3 SPH4 was looked very big mindfulness in model that manufacture doing impression check bite by Alginate and model that do impression check bite by amity sex accessory penalty silicon without using tray holder(P< 0.001). I use tray holder and SPH4 did not appear synonymy in model that manufacture doing impression check bite by Alginate and model that do impression check bite by amity sex accessory penalty silicon(P>0.05). Study finding of above when see synthesis Alginate certainly tray holder use must and I could know that hardening method does not exert big influence on volume stability if remove impression sieve of excess because amity sex accessory penalty silicon passes over tray, Also, Alginate impression material previewed can get heading a conspiracy style that volume stability of accessory penalty silicon impression material degree is if use tray holder.

  • PDF

Sphingosine Kinase Assay System with Fluorescent Detection in High Performance Liquid Chromatography

  • Jin, You-Xun;Yoo, Hwan-Soo;Kihara, Akio;Choi, Chang-Hwan;Oh, Seik-Wan;Moon, Dong-Cheul;Igarashi, Yasuyuki;Lee, Yong-Moon
    • Archives of Pharmacal Research
    • /
    • 제29권11호
    • /
    • pp.1049-1054
    • /
    • 2006
  • Activation of Sphingosine kinase (Sphk) increases a bioactive lipid, sphingosine 1-phosphate (S1P) and has been observed in a variety of cancer cells. Therefore, inhibition of Sphk activity was an important target for the development of anticancer drugs. As a searching tool for Sphk inhibitor, we developed fluorescent Sphk activity assay combined with high performance liquid chromatography (HPLC). Previously we established murine teraticarcinoma mutant F9-12 cells which lack S1P lyase and stably express Sphk1. By using F9-12 cells, optimal assay conditions were established as follows; $100\;{\mu}M\;of\;C_{17}-Sph\;and\;30\;{\mu}g$ protein of F9-12 cells lysate in 20 min. Sphingosine analog $C_{17}-Sph$ was efficiently phosphorylated by Sphk activity ($K_{m}:67.08\;{\mu}M,\;V_{max}\;:1507.5\;pmol/min/mg$). New product $C_{17}-S1P$ was separated from S1P in reversed-phase HPLC. In optimized conditions, 300 nM of phorbol 12-myristate 13-acetate (PMA) increased Sphk activity approximately twice while $20\;{\mu}M$ of N,N-dimethylsphingosine (DMS) reduced 70% of Sphk activity in F9-12 cells lysate. In conclusion, we established non-radioactive but convenient Sphk assay system by using HPLC and F9-12 cells.

K-9 자주포 엔진 적정 창정비주기 연구 (A Study of K-9 engine Proper Depot maintenance Cycle)

  • 서성철;김태균;송방원
    • 한국국방경영분석학회지
    • /
    • 제31권2호
    • /
    • pp.75-85
    • /
    • 2005
  • Even though K-series combat equipment's engine depot maintenance cycle of ROK army is 10years In average, that of the K-9 Self Propelled(SP) howitzer which has been fielded since 99 $3{\sim}4$years causing limitations to effective equipment operations and combat-readiness. Therefore, the current K-9 self-propelled howitzer engine operation period of 1,500 hours, which is greatly shorter than other equipments, had to be verified. In order to find the optimum depot maintenance cycle, related field operation conditions were verified and opinions were collected, and also the background on current depot maintenance cycle setting was studied.

젖은 헤어와 털 시뮬레이션을 위한 효율적인 응집력과 강성 처리 (Efficient Treatment of Clumping and Stiffness for Wet Hair and Fur Simulation)

  • 김종현;이정
    • 한국컴퓨터그래픽스학회논문지
    • /
    • 제23권1호
    • /
    • pp.9-16
    • /
    • 2017
  • 젖은 헤어 또는 동물의 털 시뮬레이션에서 응집력과 강성(stiffness)을 처리하는 것은 어려운 문제이다. 격렬한 움직임을 갖는 헤어나 털이 물에 젖게 되면 끝이 뭉치고 빳빳해지는 현상이 나타나게 되는데, 이는 달리는 동물이나 헤드뱅잉 하는 장면 등에서 쉽게 관찰 할 수 있다. 기존의 방법들은 정해진 시뮬레이션 시나리오에서 이 문제를 해결하려고 했지만 여전히 젖은 헤어의 특징을 묘사하기 위한 일반적인 방법이 존재하지 않는다. 이 문제를 해결하기 위해 우리는 응집력과 강성에 대한 새로운 모델링 방법을 제안한다. 기존 연구들은 물이 모발에 흡수되는 현상을 모델링 하는데 초점을 맞춘 반면, 우리는 젖은 모발의 움직임을 사실적으로 표현하는데 집중한다. 젖은 헤어는 마른 헤어와는 다르게 인접한 모발들끼리 응집력이 작용하여 서로 뭉치는 형태를 띄며, 물의 포화도가 높아질수록 빳빳해지는 독특한 물리적 특성이 나타난다. 제안된 기법의 핵심은 SPH (smoothed particle hydrodynamics) 기반의 표면 장력 모델을 확장하여 응집력을 표현하고, 강성 제약을 두어 모발의 탄성력을 조절하는 것이다. 우리 기법은 젖은 모발이 격렬한 움직임에서도 응집력을 잘 유지할 수 있도록 도와주며, 물의 포화도에 따른 모발의 빳빳함을 표현하여 사실적인 젖은 헤어 시뮬레이션 결과를 보여준다.

옵셋 인쇄기계 동력규모 변화에 따른 소음 영향 평가 (The Noise Influence Assessment according to the Change of the Offset Type Print Machine's Power)

  • 구진회;권명희;이우석;이재원;박형규;김삼수;윤희경;이규목;정대관;서충열
    • 한국소음진동공학회논문집
    • /
    • 제24권9호
    • /
    • pp.682-686
    • /
    • 2014
  • Nowadays, the needs to revise the classification criteria for noise emission facilities have been suggested by the related industries. Because there existed many reasonable factors in the criteria regarding the noise emission facilities. And the noise emission facility classification criterion of the print machine changed from 50 HP to 100 HP in 2013. But the increasement of the noise emission facility classification criterion of the print machine can cause adverse effects like the bigger noise. So, in this paper, we measured the print machine's sound power level according to the changes of the print machine's power to assess the adverse effects. The measurement method applied with KS I ISO 9614-2(1996). The corelation between the sound power level and the power of print machines was analyzed by regression analysis. In this paper, we found that the sound power level of the print machines can increase about 1.3 dB in the condition of that the power of print machine increases from 50 HP to 100 HP. And we found that the sound power level of the print machines can increase about 1.0 dB for a increasement of 1,000 SPH(sheet per hour) of printing speed. The noise emission characteristics of print machine stuied in this paper will be useful to design the noise reduction plan in the future.

우리나라 감자에 발생하는 PVY의 병원학적 특성 및 외피단백질 유전자 분석 (Etiological Properties and Coat Protein Gen Analysis of Potato Virus Y Occuring in Potatoes of Korea)

  • 정승룡
    • 한국식물병리학회:학술대회논문집
    • /
    • 한국식물병리학회 1995년도 Proceedings of special lectures on Molecular Biological Approaches to Plant Disease National Agricultural Science and Technology Institute Suwon, Korea
    • /
    • pp.77-96
    • /
    • 1995
  • To obtain basic informations for the improvement of seed potato production in Korea, some etiological properties of potato virus Y(PVY) distributed in the major seed potato production area(Daekwanryeong) were characterized, and the nucleotide and amino acid sequences of the coat protein gene of the PVY strains isolated were analyzed. PVY strains in Daekwonryeong, an alpine area, were identified to be two strains, PVYo and PVYN by symptoms of indicator plants, and their distribution in potato fields was similar. Major symptom on potato varieties by PVY was grouped as either mosaic alone or mosaic accompanied with veinal necrosis in the lower leaves. The symptom occurrence of the two symptoms was similar with Irish Cobbler, but Superior showed a higher rate of mosaic symptom than the other. The PVY strain which was isolated from potato cv. Superior showing typical mosaic symptoms produced symptoms of PVY-O on the indicator plants of Chenopodium amaranticolor, Nicotiana tabacum cv. Xanthi nc and Physalis floridana, but no symptom o Capsicum annum cv. Ace. Moreover, results from the enzyme-linked immunosorbent assay with monoclonal and polyclonal antibodies showed that the isolated PVY reacts strongly with PYV-O antibodies but does not react specifically with PVY-T antibodies. The purified virus particles were flexious with a size of 730$\times$11nm. On the basis of the above characteristics, the strain was identified to be a PVY-O and named as of PVY-K strain. The flight of vector aphids was observed in late May, however, the first occurrence of infected plants was in mid June with the bait plants surrounded with PVY-infected potato plants and early July with the bait plants surrounded with PVY-free potato plants. PVY infection rates by counting symptoms on bait plants (White Burley) were 1.1% with the field surrounded with PVY-free potato plants and 13.7% the fields surrounded with PVY-infected potato plants, showing the effect of infection pressure. The propagated PVY-K strain on tobacco(N. sylvestris) was purified, and the RNA of the virus was extracted by the method of phenol extraction. The size of PVY-K RNA was measured to be 9, 500 nucleotides on agarose gel electrophoresis. The double-stranded cDNAs of PVY-K coat protein(CP) gene derived by the method of polymerase chain reaction were transformed into the competent cells of E. coli JM 109, and 2 clones(pYK6 and pYK17) among 11 clones were confirmed to contain the full-length cDNA. Purified plasmids from pYK17 were cut with Sph I and Xba I were deleted with exonuclease III and were used for sequencing analysis. The PVY-K CP gene was comprised of 801 nucleotides when counted from the clevage site of CAG(Gln)-GCA(Ala) to the stop codon of TGA and encoded 267 amino acids. The molecular weight of the encoded polypeptides was calculated to be 34, 630 daltons. The base composition of the CP gene was 33.3% of adenine, 25.2% of guanine, 20.1% of cytosine and 21.4% of uracil. The polypeptide encoded by PVY-K CP gene was comprised of 22 alanines, 20 threonines, 19 glutamic acids and 18 glycines in order. The homology of nucleotide sequence of PVY-K CP gene with those of PVY-O(Japan), PVY-T(Japan), PVY-TH(Japan), PVYN(the Netherlands), and PVYN(France) was represented as 97.3%, 88.9%, 89.3%, 89.6% and 98.5%, respectively. The amino acid sequence homology of the polypeptide encoded by PVY-K CP gene with those encoded by viruses was represented as 97.4%, 92.5%, 92.9%, 92.9%, and 98.5%, respectively.

  • PDF