• JSTS:Journal of Semiconductor Technology and Science
• /
• v.8 no.4
• /
• pp.302-310
• /
• 2008

This paper puts forward an advanced consideration on the design of scaled multiple-gate FET (MuGFET); the aspect ratio ($R_{h/w}$) of the fin height (h) to fin width (w) of MuGFET is considered with the aid of 3-D device simulations. Since any change in the aspect ratio must consider the trade-off between drivability and short-channel effects, it is shown that optimization of the aspect ratio is essential in designing MuGFET's. It is clearly seen that the triple-gate (TG) FET is superior to the conventional FinFET from the viewpoints of drivability and short-channel effects as was to be expected. It can be concluded that the guideline of w < L/3, where L is the channel length, is essential to suppress the short-channel effects of TG-FET.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.12
• /
• pp.1764-1770
• /
• 2013

Use of the 5.1 channel audio signals suitable for the television system is improper for the radio broadcasting system, which uses the stereo audio system. Therefore, it is necessary to develop an audio down-mixer to convert 5.1 multi-channel audio signals to stereo signals for radio broadcasting. In this paper, a development of an audio down-mixer was carried out to convert 5.1 multi-channel audio signals to stereo signals. The down-mixer which was developed can use the audio signals separated from video signals, including sound signals or individual signals provided from 3-channel AES/EBU signals including Left(L), Right(R), Left Surround(Ls), Right Surround(Rs), Center(C) and Low Frequency Effect(Lfe) sounds as mixer inputs.

• Journal of Communications and Networks
• /
• v.14 no.3
• /
• pp.237-242
• /
• 2012

One of the major problems for accurate channel estimation in power line communication systems is impulsive noise. Traditional channel estimation algorithms are based on the assumption of Gaussian noise, or the need to locate the positions of impulsive noise. The algorithms may lose optimality when impulsive noise exists in the channel, or if the location estimation of impulsive noise is inaccurate. In the present paper, an effective channel estimation algorithm based on a robust cost function is proposed to mitigate impulsive noise. The proposed method can provide a closed-form solution, and the application of robust estimation theory enables the proposed method to be free from localization of impulsive noise and thus can guarantee that the proposed method has better performance. Simulations verified the proposed algorithm.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.3
• /
• pp.855-868
• /
• 2012

In this paper, we consider the discrete memoryless user relaying channel (DMURC) in which a user-relay switches its operational mode symbol-by-symbol. In particular, we obtain upper and lower bounds on the channel capacity for the general DMURC and then show that these the upper and lower bounds coincide for degraded DMURC. It is also shown that the capacity of the degraded DMURC can be achieved using two separate codebooks corresponding to the two UR states. While the UR is assumed to switch states symbol-by-symbol, the results in this paper is the same as when the UR switches states packet-by-packet.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.11
• /
• pp.3655-3673
• /
• 2014

Rendezvous is a process of two or more cognitive radio nodes gathering on the same channel at the same time for a negotiation to establish data communications. This paper discusses rendezvous issues in cognitive radio networks. It details why rendezvous is an issue in cognitive radio networks and how rendezvous works. It classifies channel access methods, and details sequence-based channel-hopping methods. It surveys existing works on blind rendezvous and compares the proposed algorithms in terms of the maximum time to rendezvous. This paper discusses the properties that an efficient channel-hopping rendezvous algorithm should have and illustrates common issues in the existing rendezvous methods. It also explains open research issues in the rendezvous area.

• Journal of Communications and Networks
• /
• v.15 no.2
• /
• pp.222-227
• /
• 2013

This paper presents an analytical framework for dynamic spectrum allocation in cognitive radio networks. We propose a distributed queuing based Markovian model each for single channel and multiple channels access for a contending user. Knowledge about spectrum mobility is one of the most challenging problems in both these setups. To solve this, we consider probabilistic channel availability in case of licensed channel detection for single channel allocation, while variable data rates are considered using channel aggregation technique in the multiple channel access model. These models are designed for a centralized architecture to enable dynamic spectrum allocation and are compared on the basis of access latency and service duration.

• Nuclear Engineering and Technology
• /
• v.41 no.5
• /
• pp.677-690
• /
• 2009

A previous study demonstrated that the two-row fuel assembly has much more favorable neutron-physical and thermal-hydraulic behavior than the conventional one-row fuel assemblies. Based on the newly developed two-row fuel assembly, an SCWR core is proposed and analyzed. The performance of the proposed core is investigated with 3-D coupled neutron-physical and thermal-hydraulic calculations. During the coupling procedure, the thermal-hydraulic behavior is analyzed using a sub-channel analysis code and the neutron-physical performance is computed with a 3-D diffusion code. This paper presents the main results achieved thus far related to the distribution of some neutronic and thermal-hydraulic parameters. It shows that with adjustment of the coolant and moderator mass flow in different assemblies, promising neutron-physical and thermal-hydraulic behavior of the SCWR core is achieved. A sensitivity study of the heat transfer correlation is also performed. Since the pin power in fuel assemblies can be non-uniform, a sub-channel analysis is necessary in order to investigate the detailed distribution of thermal-hydraulic parameters in the hottest fuel assembly. The sub-channel analysis is performed based on the bundle averaged parameters obtained with the core analysis. With the sub-channel analysis approach, more precise evaluation of the hot channel factor and maximum cladding surface temperature can be achieved. The difference in the results obtained with both the sub-channel analysis and the fuel assembly homogenized method confirms the importance of the sub-channel analysis.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.3 no.4
• /
• pp.385-398
• /
• 2009

This paper aims to find a suitable solution to joint allocation of sub-channel and transmit power for multiple users in an IEEE 802.16e OFDMA/TDD cellular system. We propose the FASA (Fairness insured Aggressive Sub-channel Allocation) algorithm, which is a dynamic channel allocation algorithm that considers all of the users' channel state information conditionally in order to maximize throughput while taking into account fairness. A dynamic power allocation algorithm, i.e., an improved CHC algorithm, is also proposed in combination with the FASA algorithm. It collects the extra downlink transmit power and re-allocates it to other potential users. Simulation results show that the joint allocation scheme with the improved CHC power allocation algorithm provides an additional increase of sector throughput while simultaneously enhancing fairness. Four frames of time delay for CQI feedback and scheduling are considered. Furthermore, by addressing the difference between uplink and downlink scheduling in an IEEE 802.16e OFDMA TDD system, we can employ the uplink channel information directly via channel sounding, resulting in more accurate uplink dynamic resource allocation.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.5
• /
• pp.115-121
• /
• 2009

In this paper, we propose an algorithm that reduces channel change delay time in the P2P based IPTV system. Channel change delay time is considered to be one of the most important performance measures in IPTV system. Proposed algorithm presents a method to reduce the channel change delay time effectively. The algorithm eliminates the first channel change delay time and reduces delay time on a continuous channel surfing. We will show the mathematical models to evaluate the performance of proposed scheme with respect to the channel change delay time.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.42 no.1
• /
• pp.183-194
• /
• 2018

This study investigated the characteristics of Omni Channel and examined the influence of them on consumers' perceived functional value and emotional value as well as the effect of perceived functional value and emotional value on user's intention of use through Omni Channel. To verify the research model, the questionnaire survey was conducted on 20's to 40's men and women residing in Seoul and the metropolitan area by convenience sampling. The number of copies used for data analysis was 696. To verify the research model, factor analysis, reliability analysis, and structural equation model analysis were performed using AMOS 20.0. First, Omni Channel characteristics consisted of four factors: instant connectivity, location-based provability, interactivity, and entertainment. Second, the instant connectivity, location-based provability and entertainment positively influenced functional value and emotional value; however, the interactivity was significant only to the emotional value. Third, consumers' perceived value of Omni Channel characteristics had a significant effect on attitude. Fourth, the more favorable the attitude toward Omni Channel is higher for the intention to use Omni Channel.