• The Transactions of the Korea Information Processing Society
• /
• v.4 no.9
• /
• pp.2366-2377
• /
• 1997

An Adaptive Usage Parameter Control(UPC) mechanism using a Variable Token Pool(VTP) which is kind of preventive traffic control in the Asynchronous Transfer Mode(ATM) networks is described. The VTP mechanism can monitor violations of the average bit rate and burst duration as well as peak bit rate for the ON-OFF type traffic. The VTP can vary the token pool size by monitoring burst duration and silence duration for a long term. It also improves the sensitivity against the violation of burst duration and average bit rate and enables to response for the violating traffic situation quickly. The variable token pool size is varied in step size by every burst duration and silence duration. Two important parameters for controlling token pool size are Down_size and Up_size. We compare the performance of LB and JW mechanism with the proposed VTP mechanism by computer simulations. We have known that the proposed method is more effective than the previous mechanisms. It is shown that the cell loss rate of the VTP quite depends on the value of Down_size and Up_size. The two parameters should be decided as a propr value according to traffic situations.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.572-579
• /
• 2001

Recent industrial requirements for highly precise shape processing have brought the electric discharge machining (EDM) in great need. High precision in EDM is primarily achieved by high performance controllers. However there exists inherent precision loss due to structural deformation. On this background, we study structural deformation characteristics of wire cut EDM via finite element (FE) analysis and axiomatic design. Two different wire cut EDMs are selected as analysis models. 3D CAD package I-Deas is first used to construct FE models of wire cut EDMs, and then ABAQUS FE code is used for following structural analysis. Pertinency of FE mesh refinement is discussed in terms of ${\eta}-factor$. It is shown that performance accuracy of EDM depends strongly on the structural characteristics. Some design enhancements are suggested in an axiomatic design point of view. Finally we provide weight and temperature induced displacement discrepancies between wire end points as position functions of each subframe.

• Microbiology and Biotechnology Letters
• /
• v.32 no.1
• /
• pp.47-51
• /
• 2004

Drug resistance is one of the most significant impediments to successful chemotherapy of cancer. Multidrug-resistance Is characterized by decreased cellular sensitivity to anticancer agents due to the overexpression of P-glycoprotein. By using adriamycin-resistance CL02 cancer cells, we undertook the screening fur agents which were effective to multidrug-resistant cancer cells from strains of the species Sorangium cellulosum isolated in our laboratory. Sorangium cellulose, cellulose-degrading myxobacteria have recently proved to be a rich source of novel anticancer agents. One of the significant examples is the promising anticancer agent epothilone. JW 1006 is the first strain of Sorangium cellulosum which was selected by us for the isolation of a metabolite by a biological screening because of a high cytotoxic activity against the CL02 cancer cells. Cytotoxicity-guided chromatographic fractionation of the culture broth led to the Isolation of two active principles, disorazole $A_1$ and $A_2$. They showed potent cytotoxicity against CL02 cancer cells with $IC_{50}$ values in the picomolar range, and were as active against drug-resistant cancer cells CL02 and CP70 as against the corresponding sensitive cells.

• KSBB Journal
• /
• v.20 no.5 s.94
• /
• pp.371-375
• /
• 2005

In the course of our search for compounds effective to multidrug-resistant cancer cells from myxobacteria with the adriamycin-resistant cancer cell line CL02, we found cytotoxic activity against the CL02 cells in culture extract of Sorangium cellulosum JW1045. Activity-guided fractionation of the culture extract led to the isolation of an active principle, chivosazole F, This compound showed high cytotoxic activity against cultured human cancer cells. The $IC_{50}$ values, measured by a SRB assay with different cell lines, ranged from 0.1 to 10 ng/ml. Furthermore chivosazole F was as active against drug-resistant cancer cells CL02 and CP70 as against the corresponding sensitive cells.

• Journal of the Korea Concrete Institute
• /
• v.17 no.4 s.88
• /
• pp.535-542
• /
• 2005

Two series of experiments on the performance of beam-column joints in High-Strength Reinforced concrete frames were carried out. Main experimental parameters were : concrete strength, column axial load and amount of joint hoop reinforcement. Test result showed that the ultimate shear strength of exterior joints increased of column axial compressive force and the amount of the joint hoop reinforcements. Through the regression analysis on the 24data, the following equation is obtained $jv_u=(2.935{\times}10-3\;{\rho}jw{\cdot}fy\;+\;0.365){\sqrt{f_{ck}}}$

• Korean Journal of Microbiology
• /
• v.36 no.3
• /
• pp.181-186
• /
• 2000

The cellulosome of Clo.~tr~rlil~m tl\ulcornererfnocellum consistmg of 26 dfferent polypeptides contains calcium. The polypeptides dissociated when calcium was removed. Most of dockerill region in the catalytic polypeptides cleavcd during dmociation. The dissociated polypeptides were well separated by MonoQ column chromatography into CipA containing fraction, a fraction still complexed wit11 91 kDa (CelK-a). 60 IiDa and 57 kDa polypeptides, and fractious contailling mainly single polypeptide of 46 kDa (CelA-a) or 71 1d)a polypeptide (CelS-trj Most or the fractions hydrolyzed c~ystalliue cellulose The purified 71 kDa polypeptide was strictly dependent on calcium for crystalline cellulose hydvolyzing activities a1 $60^{\circ}C$~$70^{\circ}C$ but 46 kDa polypeptide was not. 46 M)a polypeptide digested cellodextri~~ as cellobiose or cellotriose unit, and glucose was produced together with cellobiose and cellotriose froln cellotetraosc. It seems that cellulosome produces final product, cellobiose, through coordinated ~qulation of activities of vannus subunits.

• International Journal of Oral Biology
• /
• v.46 no.1
• /
• pp.60-65
• /
• 2021

Dental health care workers (DHCW) are at a risk of occupational exposure to Helicobacter pylori from the aerosolized oral biofilms and saliva of patients. We designed this study to investigate the prevalence of H. pylori in the oral biofilms of a group of dental and non-dental undergraduates from Sri Lanka. After obtaining informed consent, oral biofilms were collected from 38 dental undergraduates (19 males and 19 females) undergoing clinical training and 33 non-dental undergraduates (14 males and 19 females). The participants were in the age range of 22-27 years and had healthy periodontium. Total DNA from the oral biofilms were extracted, and H. pylori DNA was detected using polymerase chain reaction (PCR) amplification of 16S rRNA gene of H. pylori using JW22-JW23 primers, and the results were confirmed using PCR amplification of H. pylori-urease specific HPU1-HPU2 primers. Out of 71 participants, 11 (28.95%) dental and 3 (9.09%) non-dental undergraduates had H. pylori in their oral biofilms indicating an overall prevalence rate of 19.72% (14/71). Thus, the prevalence of H. pylori in oral biofilms was significantly higher in dental undergraduates than in non-dental undergraduates (p < 0.05). An odds ratio of 4.07 indicated that dental undergraduates were four times more likely to harbor H. pylori in their oral biofilms than non-dental undergraduates. Foregoing data support the fact that there may be greater occupational risk of exposure to H. pylori for dental undergraduates during clinical training than that for non-dental undergraduates, warranting meticulous infection control practices during clinical dentistry.

• Analytical Science and Technology
• /
• v.28 no.3
• /
• pp.246-254
• /
• 2015

From 2013 to 2014, volatile organic compounds (VOCs) were analyzed to determine biogenic volatile organic compounds (BVOCs) and anthropogenic volatile organic compounds (AVOCs) at eight sites in Mt. Mudeung and one site in downtown, by using a GC/Mass-ATD (automatic thermal desorber). The concentration of terpene noted as biogenic volatile organic compounds at Pungamjeong (PA), in a forest of Chamaecyparis obtusa, was 821 pptv, which was the highest among the eight sites. This value was followed by Wonhyogyegok (WH: 785 pptv), Norritzae (NZ, coniferous forest: 679 pptv), Dongjeokgol (DJ, mixed species forest: 513 pptv), Jangbuljae (JB, Abies koreana: 476 pptv), and Seinbongsamgerri (SS, pine trees: 464 pptv). 11~15 species of terpene was detected in the forest depending on the site. At PA in May, α-pinene showed the highest value, occupied 20% of terpene followed by coumarin, sabinene, phellandrene, myrcene, borneol, eucalyptol, β-pinene, cymene, δ-limonene, γ-terpinene, camphor, camphene, and mentol in the order. The mean concentrations of AVOCs were 0.74~2.52 ppbv in the forests and 3.14 ppbv in the downtown area. From May to July, the AVOCs ratios of the downtown to each forest were 1.9~4.0. Among 10 species of AVOCs, the sum of toluene and benzene was 2.34 ppbv and occupied 75%. In June, the ratios of toluene were 44.1% at DJ site and 53.1% at JW site (downtown). The BVOCs showed a positive correlation with the AVOCs at the forest sites (r = 0.328), which was statistically insignificant (p = 0.184).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.4
• /
• pp.311-322
• /
• 2019

In order to establish an optimal double cropping system to obtain the maximum annual quantity, we investigated the annual productivity of whole-crop silage (WCS) rice, Jowoo (Jw), Yeongwoo (Yw), and Mogwoo (Mw), and winter feed crops (WFC), Italian ryegrass (IRG), Greenfarm (GF), rye Gogu (GU), and triticale Joseong (JS), in paddy fields of the central plains of Korea. From 2016 to 2019, each crop was subjected to two standard cultivation methods: WCS rice and WFC optimal. Using the WCS optimal mode, the average dry matter yield (DMY) of WCS rice, early flowering Jw, was 15.8 tons/ha and 21.0 for the mid-late heading Yw; there was no significant difference compared to the 19.2 tons/ha late-flowering Mw (p<0.01). The WFC were not significantly different between GF (3.2 tons/ha) and GU (4.5) sown on September 23rd, while JS was the highest at 12.6 tons/ha (p<0.001). There was a significant difference in the order of JS (16.6 tons/ha) > GF (10.5) > GU (4.7)(p<0.001) sown on October 11th. For JS sown on October 31st, the DMY was 11.8 tons/ha, which was significantly higher than that of the other two crops (p<0.05). Except for rye GU, DMY was the highest when sown on October 11th. For WFC optimal mode, the average DMY of JS was the highest at 18.3 tons/ha, which was significantly different from that of GF (10.9) and GU (9.6) (p<0.001). The DMY of WCS rice transplanted on May 10th was the highest at 23.0 tons/ha in Mw, which was not significantly different from that of Yw (21.4) but significantly different from that of Jw (15.9) (p<0.05). On transplanting on May 25th, the DMY of Mw was the highest at 24.2 tons/ha; this was not significantly different from that of Yw (20.7), but it was significantly different from that of Jw (18.6) (p<0.05). When transplanted on June 11th, the DMY was 21.3 tons/ha in Yw, which was significantly higher than the DMY of other two cultivars, Jw and Mw (p<0.05). For the WCS rice-WFC double cropping, the total annual DMY was 33.6 tons/ha with the combination of the WCS rice, Yw, and the triticale JS for WCS optimal mode. Meanwhile, the total annual DMY was 39.6 tons/ha with the combination of the triticale JS and the WCS rice, Yw, for WFC optimal mode. In conclusion, the strategies for obtaining the maximum yield of high-quality forage for WCS rice-WFC, WFC-WCS rice double cropping are as follows: 1) cultivation centered on the optimal mode of WFC, and 2) sowing the WFC, triticale JS in mid-October, harvesting the crops around the end of May and transplanting the WCS rice, Yw, in early June to obtain the maximum DMY of 39.6 tons/ha.

• Journal of the Korean Society of Safety
• /
• v.19 no.2
• /
• pp.21-25
• /
• 2004

This study deals with the characteristics of wire-cut EDM(Electrical Discharge Machining)process in aluminum alloys. Besides 2 series and 7 series of aluminum alloys for aerospace applications, porous aluminum is tested, which is used for sound absorbing matherial and interior and exterior material of building. Jinyoung JW-30 wire cutting machine was used in this experiment. Tap wate passed a filter and ionization was used as the discharging solution. An immerision method was applied as a cooling method because it separates chips effectively and machinability is good even with low value of electric current. The speed of fabrication was estimated by measuring the travel distance of the work piece and time spent for the movement. As pulse-on-time increased the fabrication speed decreased. On the other hand, as peak voltage of peak current increased the fabrication speed increased. In general 7075 aluminum alloy resulted in higher fabrication speed.