• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.12
• /
• pp.2695-2701
• /
• 2012

We need privacy protection protocols, that satisfy three essential security requirements; confidentiality, indistinguishability and forward security, in order to protect user's privacy in RFID system. The hash-chain based protocol that Ohkubo et. al proposed is the most secure protocol, that satisfies all of the essential security requirements, among existing protocols. But, this protocol has a disadvantage that it takes very long time to identify a tag in the back-end server. In this paper, we propose a scheme to keep security just as it is and to reduce computation time for identifying a tag in back-end server. The proposed scheme shows the results that the identification time in back-end server is reduced considerably compared to the hash-chain based protocol.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.13 no.2
• /
• pp.89-98
• /
• 2005

In this study, indoor VOCs concentration emitted from floor and furniture was measured after the installation of floor and furniture in a real residence. With the measured data, prediction method and predication equations for indoor concentration of each VOCs and BTEX were developed. The following conclusions were drawn from this study. First, according to the predicted results of concentration decrease of BTEX (benzene, toluene, ethylbenzene, m,p,o-xylene) after the installation of floor in a real residence, prediction equation can be expressed using exponential function. Second, in case of floor, more reliable prediction equation can be obtained by using cumulative value of indoor concentration than by using just hourly measured value directly. Indoor concentration of benzene can be expressed as $y=408.52(1­e^{-00031{\times}time})$ with $R^2$ of 0.94 which is significantly high value. Third, toluene showed the highest concentration in case of furniture installation indoors, and it needed the longest time for concentration decrease. However, other substances except toluene showed constant concentration throughout the measurement period. Fourth, in case of furniture installation indoors, prediction equation of toluene concentration decrease is estimated to be $y= 3616.3{\times}e^{(-0.1091{\times}time)}+513.96{\times}e^{(-0.0006{\times}time)}\;with\; R^2$ of 0.95 which is significantly high value.

• Proceedings of the Korean Society of Environment and Ecology Conference
• /
• 2006.10a
• /
• pp.98-102
• /
• 2006

We studied the behavior of black vultures breeding in Erdenesant, Mongolia through time budget observation. We observed a pair of black vulture for 115 days from April 30 to August 22, 2005, of which 15 days were before hatching and 100 days of brood rearing. The egg hatched on May $14^{th}$. Incubation was done by both a male and female vultures, but the period covered by the male vulture(56.82%) was longer than that by the female one(34.62%). In the early days of brood rearing, time spent by the female vulture at the nest took 54.9 % and it was 19.27% for the male. In the middle of brood rearing period, just inaction and preening were noticed, as they watched their chicks for a long time without sheltering chick under the parent's body. Late brood rearing period was characterized by less chick care and adults mostly stayed in the nest only when to feed the chicks. During breeding time, both the male and the female vulture fed only the chicks and did not give food to each other. During rearing period, the male vulture fed the chick more often than female.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2006.11a
• /
• pp.212-215
• /
• 2006

The Beautiful rest room is simple how to think. We need to understand that excretion is important as much as eating. When we didn't have foods, eating was important in itself no matter what our lives environments. But now we want to eat in more dignified and more cultural place. Most of restaurants spend money on adjusting place for the consumes' desire. It is same way about rest room, it is time to change our rest room to place of rest and speculation over the place which we fix our natural urge. We can fix our natural urge, take a rest, and get creative ideas in more convenient, more healthy and more comfortable. It is time for us to change out thought about rest room; it is not dirty and stink place, but civilized living place like developed country. Also, we need new concept to take a triangular position about rest room is one of structure over just decorations. This research suggest new public rest room without precedent based on instance analysis about rest room inside and outside the country.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.6 no.3
• /
• pp.1-7
• /
• 2007

In this paper, we propose a new prioritized Optical Burst Switching (OBS) protocol based on a hop count, which can provide efficient utilization in optical networks. Under several legacy schemes, a switch drops the burst with the shortest time regardless of its traversed hop count. As a result, a dropped burst that have been traversed many hops might cause increased bandwidth waste compared to one that has traversed a few hops. To improve this problem, we propose the Just Enough Time (JET) with a hop counting scheme which can reduce the wasted bandwidth by prioritizing the burst traversed many hops over others. From the simulation result, it is preyed, we show that the proposed scheme has advantages against legacy schemes in terms of the burst blocking probability and the link utilization.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.8 no.1
• /
• pp.61-67
• /
• 2008

This paper introduces the multi-vehicle routing problem(MRP) which is different from the traveling sales problem(TSP), and presents the ant system(AS) applied to the MRP. The proposed MRP is a distributive model of TSP since many vehicles are used, not just one salesman in TSP and even some constraints exist. In the AS, a set of cooperating agents called vehicles cooperate to find good solutions to the MRP. To make the proposed MRP extended more, Tokyo city model(TCM) is proposed. The goal in TCM is to find a set of routes that minimizes the total traveling time such that each vehicle can reach its destination as soon as possible. The results show that the AS can effectively find a set of routes minimizing the total traveling time even though the TCM has some constraints.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.3
• /
• pp.361-368
• /
• 1997

In order to eliminate position errors existing at the steady state in the motion control of robotic manipulators, a new fuzzy control algorithm is propeosed using three variables, position error, velocity error and integral of position errors as input variables of the fuzzy controller. Although the number of input variables of the fuzzy controller is increased from two to three, the number of fuzzy control rules is just increased by two. Three dimensional look-up table is used to reduce the computational time in real-time control, and a technique reducing the amount of necessary memory is introduced. Simulation and experimental studies show that the position errors at the steady state are decreased more than 90% compared to those of existing fuzzy controller when the proposed fuzzy controller is applied to the 2 axis direct drive SCARA robot manipulator.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.10
• /
• pp.1932-1936
• /
• 2008

A new analytical method using 1-(2-pyridylazo)-2-naphthol modified $SiO_2$ nanoparticles as solid-phase extractant has been developed for the preconcentration of trace amounts of mercury(II) in different water samples. Conditions of the analysis such as preconcentration time, effect of pH, sample volumes, shaking time, elution conditions and effects of interfering ions for the recovery of analyte were investigated. The adsorption capacity of nanometer $SiO_2$-PAN was found to be 260 ${\mu}molg^{-1}$ at optimum pH and the detection limit (3$\sigma$) was 0.48 ${\mu}gL^{-1}$. The extractant showed rapid kinetic sorption. The adsorption equilibrium of mercury(II) on nanometer $SiO_2$-PAN was achieved just in 5 mins. Adsorbed mercury(II) was easily eluted with 5 mL of 6 M hydrochloric acid. The maximum preconcentration factor was 50. The method was applied for the determination of trace amounts of mercury(II) in various water samples and industrial effluents.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.983-987
• /
• 2003

Vibration causes noise and makes structure unstable. Especially, due to the effort of lightening, deformation of flexible structure is increased in its shape. Just a little disturbance causes vibration and low damping ratio causes residual vibration lasts long time. In this paper, by using a neuro-controller, which is one of the algorithm of adaptive control. we performed adaptive control of flexible cantilever plate and opened box structure with piezoelectric materials. The proposed adaptive vibration control algorithm, a neuro-controller, is proved in its effectiveness by applying to a opened box structure. The neuro-controller was implemented with DSP, and the real-time adaptive vibration control experiment results confirm that neuro-controller is reliable.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.635-640
• /
• 2000

Thermal deformation of machine tools can be evaluated from the analysis of the whole temperature field. However, it is extremely inefficient and impossible to acquire the whole temperature field by measuring temperatures of every point. So, a temperature estimator, which can estimate the whole temperature field from the temperatures of just a few points, is required. In this paper, 1-dimensional heat transfer problem is modeled with modal analysis and state space equations. and then state observer is designed to estimate the intensity of heat source and the whole temperature field in real-time. The reliability of this estimator is verified by making a comparison between solutions by the proposed method and the exact solutions of examples. The proposed method is applied to the estimation of temperature distribution in a ball screw system.