• Physical Therapy Rehabilitation Science
• /
• 제3권2호
• /
• pp.86-92
• /
• 2014

Objective: Whole body vibration (WBV) and plyometrics are common training techniques which increase strength, blood flow, and lower body force and power. The effects these techniques have on sedentary population is unknown. It is our aim to assess the effectiveness of WBV and plyometrics on sedentary population. Design: Experimental study. Methods: Twenty-seven sedentary subjects were assigned to either the control group, jumping only group, or jumping with vibration group. Jump height (myotest or vertec), velocity, force, blood lactates, and rating of perceived exertion (RPE). Subjects were measured on the initial, seventh, and eighteenth visits. Control group attended measurements only. Jumping only and jumping with vibration groups performed jumping from a vibrating platform to a surface 7 1/2 inches higher for 3 bouts of 20 seconds. Each subject in jumping only and jumping with vibration groups attended three times per week for six weeks. Vibration was set at 40 Hz and 2-4 mm of displacement. Results: There was no significant change among groups in force, velocity, vertec height, and myotest height. However there was a significant increase in vertec height from initial to final measure (p<0.05) for jumping with vibration group. RPE was significantly higher between control group and jumping with vibration group after intervention (p<0.05). Conclusions: WBV with vibration increased jump height. Jumping with vibration group experienced increased exertion than for controls. WBV with plyometrics had no effect on force, velocity, blood lactates, or calculated jump height. Further studies controlling for initial measure of blood lactates and using an external focus may be necessary to elicit velocity, force and jump height changes.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1427-1432
• /
• 2008

This paper describes the locomotion of a water jumping robot which attempts to emulate the fishing spider’s ability to jump on the water surface. While previous studies of the robots mimicking arthropods living on water were focused on recreating their horizontal skating motions, here we aim to achieve a vertical jumping motion. The robot jumps by pushing the water surface with rapidly released legs which were initially bent. The motion is triggered with a latch driven by the shape memory alloy actuator. The robot is capable of jumping to the maximum height of 26mm. Jumping efficiency, defined the maximum jumping height on water over the maximum jumping height on rigid ground, is 0.26 This work represents a first step toward robots that can locomote on water with superior versatility including skating and jumping.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권6호
• /
• pp.733-738
• /
• 2000

The objective of this study was to describe the nature of the inheritance of jumping as a behavioral trait and to analyze quantitatively the jumping height as a measure of vigor in two subspecies of mice. Two subspecies of mice, Yonakuni wild mouse (Y) and $CF_{{\sharp}1}$ laboratory mouse (C), were used as the parental types. Reciprocal mating between these two subspecies was made to produce subsequently the first and second generations. The first generation was $F_1$ (YC) resulting from $Y\;male{\times}C\;female$, and $F_1{^\prime}$ (CY) from $C\;male{\times}Y\;female$. The second generation $F_2$ (YCYC) was from mating $F_1{\times}F_1$ and $F_2{^\prime}$ (CYCY) from $F_1{^\prime}{\times}F_1{^\prime}$. Individuals were treated with a set of direct current shock apparatus at six weeks of age to evoke jumping. The results showed that the ratio between jumping and non jumping mice (J: NJ) for C was 0%:100% (0:1), which means that all C did not jump throughout the experiment, whereas Y was 68%:32% (2:1); and the $F_1$ and $F_2$ showed 65%:35% (2:1) and 51%:49% (1:1), respectively. All $F_1{^\prime}$ and $F_2{^\prime}$ individuals jumped as indicated by the ratio 100%:0% (1:0) for both these two genetic groups. Of the jumped mice, average height of the first three jumping observed for pooled sexes in Y, $F_1$, $F_2$, $F_1{^\prime}$ and $F_2{^\prime}$ were 19.3 cm, 19.3 cm, 18.0 cm, 19.9 cm and 16.4 cm, respectively. The distribution of jumping height showed a tendency to be a normal distribution. The jumping activity and jumping height may be affected by some major genes and polygenes, respectively.

• 한국운동역학회지
• /
• 제13권3호
• /
• pp.1-14
• /
• 2003

This study was conducted to investigate the principles and motions for increasing the jumping height of Fosbury Flop. The subjects were three male jumpers who were former Korean national team players. Their jumping motions were analyzed using the DLT method of three-dimensional cinematography. The conclusions were as follows. 1. The horizontal velocity of approach run and decreasing of this velocity during the take off phase were increased as the jumping height was increased. Therefore, in order to increase the jumping height, the horizontal velocity of approachrun should be increased and decreased properly during the take-off phase. The average height of the analyzed Dials was 2.15m. The average horizontal velocity of approachrun was 7.49m/s and decreased to 4.16m/s at the instance of take-off. 2. The vertical velocity of the center of gravity was increased as the ascending height of the center of gravity during the take-off phase was increased. Therefore, the center of gravity at the instant of touch down should be lowered. This could be possible by increasing the length of the last stride and the backward lean angle of the body. The average length of the last stride was 111.1% of the standing height, the average height of the center of gravity was 46.6% of the standing height and the average backward lean angle of the body was 40.3 degrees.

• The Journal of Korean Physical Therapy
• /
• 제28권5호
• /
• pp.269-273
• /
• 2016

Purpose: This study was conducted to examine the effect of kinesio taping (KT) on vertical jumping performance. Methods: Young women (n=24) performed vertical jumping under three conditions: kinesio taping, placebo taping, and no taping. All tapes were applied to both quadriceps and the gastrocnemius of the subjects. Vertical jump height and power were measured using an OptoGait, and the non-parametric Friedman test was used to identify differences between conditions. Results: No significant differences in maximum jump height or peak jump power between were observed between taping conditions. Conclusion: The results showed that KT did not facilitate muscle performance by generating higher jumping power or yielding a better jumping performance. As the functional performance is related to muscle strength, this finding may be explained by the fact that KT has no effects on muscle strength.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권7호
• /
• pp.888-893
• /
• 2000

The present study was conducted to evaluate heterosis effects of body weight and jumping height for successive generations of rotational crossing using two subspecies of mice which are very different in body weight and in genetic relationship from each other. Domesticated laboratory mouse $CF_{{\sharp}1}$ (C) and Yonakuni wild mouse (Y) were used as materials. Two groups of rotational crossing was made according to the parent used at the beginning of crosses, C male$\times$Y female and Y male$\times$C female. These crosses were done to produce the first ($G_1$ and $G_1{^{\prime}}$), second ($G_2$ and $G_2{^{\prime}}$) and third generations ($G_3$ and $G_3{^{\prime}}$) with sire used was alternated. Individual body weights were weighed at 1 (wk1), 3 (wk3), 6 (wk6) and 10 weeks of age (wk10) and jumping heights were measured at six weeks of age (wk6). Only the first litter used. For body weight, results of this study showed that genetic group effects were significant (p<0.01) source of variation at all ages studied. Sex effects were significant (p<0.01) at wk3, wk6 and wk10, but not at wk1. Significant interaction effects (p<0.01) between genetic group and sex were found at wk6 and wk10. The C mice with large maternal effects produced heavier offspring body weight and crosses using sire of this subspecies maintained heavy weight compared to wild Y mouse sire that has small body size. Heterosis tended to exist at the rotational crossing started from Y male C female. For jumping height, effects of genetic group and sex were significant, sire and dam effects (heterosis) exhibited from the first to third generations, and no maternal effects were observed.

• 제어로봇시스템학회논문지
• /
• 제15권11호
• /
• pp.1108-1114
• /
• 2009

Mobility is one of the most important features for a guard robot since it should be operated in rough places. A wheel-based mobile robot capable of jumping is an appropriate structure for a guard robot because it can easily satisfy the requirements for small guard robots. The jumping robot can reach a higher place more rapidly than other locomotion methods. This research proposes a small robot equipped with the jumping mechanism based on the conical spring with the variable length endtip. The variable length endtip enables the independent control of the jump force and jump angle which are related to the jump height and jump distance, respectively. Various experiments demonstrated that the proposed jumping mechanism can provide the independent control of jump force and jump angle, and improve the mobility of a small robot to overcome an obstacle. Furthermore, a combination of the jumping mechanism and the PSD sensor to measure the distance to the step enable the jumping robot to autonomously climb stairs.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1195-1200
• /
• 2007

It is desirable that the guard robot should be small-sized and light-weighted to increase its portability. In addition, it should be able to overcome a relatively high obstacle to cope with different situations. The jumping robot can reach a higher place more rapidly than other locomotion methods. This research proposes the jumping mechanism based on the conical spring for a small robot. Both the clutch mechanism and conical spring are incorporated into the jumping mechanism. In the clutch mechanism, the spring can be immediately compressed and released by one actuator with the planetary gear train and one-way clutch. The robot equipped with the jumping mechanism can overcome the obstacles which are higher than its height. In this paper, the characteristic of the conical spring for the jumping robot is determined and the small-sized, lightweight jumping mechanism is developed. The validity of the jumping mechanism was verified by various experiments. It is shown that the robot using this mechanism can provide good mobility in the rough terrain.

• 한국운동역학회지
• /
• 제22권1호
• /
• pp.25-34
• /
• 2012

The purpose of this study was to determine the effects of landing height on the lower extremity during a counter movement jump. Fourteen healthy male subjects (age: $27.00{\pm}2.94$ yr, height: $179.07{\pm}5.03$ cm, weight: $78.79{\pm}6.70$ kg) participated in this study. Each subject randomly performed three single-leg jumps after s single-leg drop landing (counter movement jump) on a force platform from a 20 cm and 30 cm platform. Paired t-test (SPSS 18.0; SPSS Inc., Chicago, IL) was performed to determine the difference in kinematics and kinetics according to the height. All significance levels were set at p<.05. The results were as follows. First, ankle and knee joint angles in the sagittal plane increased in response to increasing landing height. Second, ankle and knee joint angles in the frontal plane increased in response to increasing landing height. Third, there were no significant differences in the moment of each segment in the sagittal plane for the jumping height increment. Fourth, ankle eversion moment and knee valgus moment decreased but hip abduction moment increased for the jumping height increment. Fifth, Ankle and knee joint powers increased. In percentage contribution, the ankle joint increased but the knee and hip joints decreased at a greater height. Lastly, as jumping height increased, the power generation at the ankle joint increased. Our findings indicate that the height increment affect on the landing mechanism the might augment loads at the ankle and knee joints.

• 대한기계학회논문집A
• /
• 제34권9호
• /
• pp.1145-1151
• /
• 2010

본 논문은 형상기억합금 와이어에 의해 구동되는 점핑로봇에 대한 연구로서 기구의 설계와 컴퓨터 시뮬레이션을 포함하고 있다. 인간과 같은 척추동물 하지 근골격계의 구조와 기능을 모방한 구조의 점핑 기구를 설계하였다. 점핑 기구의 각 다리는 대퇴부, 정강이, 발의 세 부분으로 구성되고, 점핑에 필수적인 단일관절근육인 대둔근, 양관절근육인 대퇴직근과 비복근을 포함하는 구조이다. 각 근육을 형상기억합금 와이어로 대체한 컴퓨터 모델로 시뮬레이션한 결과, 로봇의 최대 점핑 높이가 로봇 신장의 약 4 배임을 확인하였다. 또한 구조가 보다 단순화된 로봇 모델과 점핑 성능을 비교하였고, 그 결과 근골격계를 모방한 모델이 점핑 높이 면에서 3.3 배 우수한 것으로 나타났다. 이러한 컴퓨터 시뮬레이션을 통하여 형상기억합금이 소형 점핑로봇의 작동기로 사용하기에 적합함을 확인하였다.