• Korean Journal of Environmental Agriculture
• /
• v.14 no.3
• /
• pp.302-311
• /
• 1995

Benfuresate or oxolinic acid, as an experimental pesticide, was applied to the different textural paddy or upland soil respectively under the field condition and the residual concentrations were determined. Six kinetic models were employed to characterize the best-fit kinetic model describing the residual pattern of benfuresate or oxolinic acid and the $t\frac{1}{2}$ estimated from each model was comparatively assessed. All of the six models explained significantly the residual patterns of the pesticides but the empirical models such as PF, EL, and PB were not recommendable for the $t\frac{1}{2}$ estimation. Among theoretical models, the residual patterns were followed in the orders of the second-order(SO)>first-order(FO)>zero-order(ZO) kinetics, judging from the size and significance of coefficient of determination and standard error. However, the multiple FO model, consisting of the fast and slow decomposition steps, was better than the single FO model for the residual pattern and the $r^2$ in this case became similar to that of SO kinetic model. Thus the multiple FO and SO models were represented as the best fit model of the experimental pesticide. The $t\frac{1}{2}$ of benfuresate estimated from the single FO kinetic model in Weolgog and Cheongwon series was 49 and 63 days, respectively, which were 20 and 13% longer than the respective $t\frac{1}{2}$ from the SO kinetic model. The $t\frac{1}{2}$ of oxolinic acid from the FO model in Yonggye and Ihyeon series were 87 and 51% longer than those from the SO kinetic model, respectively. These results demonstrated that the best-fit model representing the residual pattern of a pesticide and the resultant $t\frac{1}{2}$ might be variable with the kinds of pesticides and the environmental conditions. Therefore it is recommended that the half-life of a pesticide be assessed from the best-fit model rather than from the FO kinetic model uniformly.

• Journal of Environmental Science International
• /
• v.7 no.6
• /
• pp.761-772
• /
• 1998

This study was performed to determine the optimum coagulant dosing amount for effective treatment of raw water. The removal rate of turbidity and the variations of water qualities according to various dosage of coagulants such as Alum, PAC and PACS were investigated. The optimum coagulant dosing amount to make the lowest turbidity of water were 35mg/ι t of Alum, 30mg/ι of PAC and 10mg/ι of PACS in case of 5 NTU of raw water turbidity, and 30mg/ι of Alum, 25mg/ι of PAC and 10mg/ι of PACS in case of 10 NTU of that, respectively. The removal rates of turbidity at 4 min. and 8 min. of settling time were 10 and 72% of Alum, 44 and 62% of PAC and 25 and 55% of PACS in case of 5 NTU, and 52 and 70% of Alum, 90 and 95% of PAC and 10 and 28% of PACS in case of 10 NTU, respectively. Judging from the settling capability of floc., the reaction time of floe. formation and removal efficiency of turbidity, PAC was evaluated as more effective coagulant than Alum and PACS. Also PAC was regarded as the most effective coagulant when the water supply was changed sharply and the fluctuation of the surface loading occured with wide and sharp in settling basin. pH and alkalinity of the water were decreased with increasing coagulants dosage. But pH and alkalinity were not decreased below 5.8 which is the standard for drinking water quality, and 10mg/ι which is the limit concentration of floc. breakage, respectively. Residual Al of the treated water was decreased with increasing coagulants dosage in case of 5 and 10NTU of raw water turbidity. $KMnO_4$ consumption of the water was decreased with increasing coagulants dosage. The reduction rate of $KMnO_4$ consumption at the optimum coagulants dosage were 39% of Alum. 18% of PAC and 11% of PACS in case of 5 NTU of raw water turbidity, and 42% of Alum, 27% of PAC and 36% of PACS in case of 10 NTU of that, respectively. Any relationship was not found between the removal rate of turbidity and KMnO$_4$ consumption. TOC of the water was a bit decreased with increasing coagulants dosage up to 30mg/ι but not changed above 30mg/ι of coagulants dosage. The degree of TOC reduction was increased in the order of Alum, PAC and PACS treatment. Zeta potential of the colloidal floe. at the optimum coagulants dosage was in the range of -20~-15mV in case of 5 NTU of raw water turbidity and 0~0.5mV in case of 10 NTU of that. respectively. Although the kinds and dosages of coagulants were different, zeta potential range were fixed under the conditions of the best coagulation efficiency.

• The Korean Journal of Air & Space Law and Policy
• /
• v.31 no.2
• /
• pp.73-98
• /
• 2016

This is a case review of the Korean Supreme Court about international jurisdiction over a foreign-related case. This case is a guideline to other following cases how Korean court has international jurisdiction over the foreign elements cases. This case was an air crash accident in Busan, Korea. And the applicant was a chinese who was parents of flight attendant. The defendant was Air China. The applicant suid the defendant in Korea court, requesting for compensation for damages based on the contract of employment between died employee and the defendant and tort. The trial court rejected jurisdiction. But Supreme court granted jurisdiction on Korean court. The court determined the jurisdiction by the Korean Private International Law Act(KPILA). The KPILA has a concept of 'substantial connection', it is a main legal analysis to determine the jurisdiction. In the act, Article 2 Paragraph 1 says "In case a party or a case in dispute is substantively related to the Republic of Korea, a court shall have the international jurisdiction. In this case, the court shall obey reasonable principles, compatible to the ideology of the allocation of international jurisdiction, in judging the existence of the substantive relations." And Article 2 Paragraph 2 declares "A court shall judge whether or not it has the international jurisdiction in the light of jurisdictional provisions of domestic laws and shall take a full consideration of the unique nature of international jurisdiction in the light of the purport of the provision of paragraph (1)." In this case review find concepts, theories and cases out to clarify the meaning about Article 2 of the KPILA. Also it quoted from the concept of "the base rule" in Rome I (Regulation (EC) 593/2008 on the law applicable to contractual obligations) to apply the contract of employment between flight attendant and Air carrier.

• Korean Journal of Veterinary Research
• /
• v.15 no.2
• /
• pp.147-152
• /
• 1975

Although considerable research has been done on the blood picture of the horse, hot-blooded and cold-blooded, little work has been made of the blood picture of the army pack horse, Jeju horse. The object of the present investigation was to make good this deficiency, and to suggest standard for the blood picture of army pack horses kept under the regular military training and the ideal feeding in the heart of a mountain. Blood samples were drawn from the jugular vein through a 15-gauge bleeding needle from 41 males and 28 females, aging 3 to 9 years old. It was taken between seven and nine o'clock in the morning. Animals were handled as quietly as possible to avoid any excitation. No restraint other than a halter was used. Enumeration of erythrocyte, total and differential leukocyte count, determination of hemoglobin in blood, and the value of packed cell volume were male in the usual manner, and erythrocytic constant was calculated by the method of Wintrobe. Erythrocyte count was $7.83{\pm}0.20(4.95{\sim}11.05){\times}10^6/mm^3$(SE). This value was much lower than hot-horses, but slightly higer than the values of cold-horse reported from foreign country. Concentration of hemoglobin in blood was $13.0{\pm}0.33(9.5{\sim}17.8)g/100ml$. This value was much higher than that of cold-horses observed by the other authors, approaching to the values of hot-horses. Packed cell volume was $32.1{\pm}0.92(22{\sim}42)ml/100ml$. This vague was a little higher than that of the other cold-horses. Mean corpuscular volume was $41.5{\pm}1.20(26.6{\sim}59.3){\mu}m^3$. This value matched so well with the other results recorded by various investigators. Mean corpuscular hemoglobin and mean corpuscular hemoglobin concentration were $16.9{\pm}0.43(12.3{\sim}25)$ pg and $41.0{\pm}0.45(29.1{\sim}51.1)g/100ml$, respectively. These values were significantly higher than the values found by the other investigations. Total leukocyte enumeration was $10.5{\pm}0.41(5.6{\sim}17.9){\times}10^3/mm^3$, being considered as normal. And differential leukocyte count of neutrophil was $44.5{\pm}2.23(15{\sim}76)%$, $5,527{\pm}234(2,231{\sim}9,144)/mm^3$, of lymphocyte $50.5{\pm}1.19(19{\sim}77)%$, $4,307{\pm}125(1,456{\sim}11,098)/mm^3$, of monocytel (0~4)%, $105(0{\sim}352)/mm^3$, of eosiophil 3.2(0~14)%, $340(0{\sim}1,232)/mm^3$ and of basophil 0.25(0~3)%, $23(0{\sim}236)/mm^3$. The percentage of the differential count obtained from the present work showed a good agreement with the results of various authors. Of the horses examined monocyte was found from 42 horses, eosinophil from 62 horses and basophil from 10 horses. No significant differences recognized between male and female horses, and the effect of age was not observed between three to nine years old. Judging from the blood picture of the present investigation, it could be stated that the army pack horses on training were kept better than the average farming conditions.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.4
• /
• pp.345-350
• /
• 1991

Rough rice samples of Chucheongbyeo, Bongkwangbyeo and Hwaseongbyeo were collected by the National Agricultural Products Inspection Office. Drying methods of rough rice were sun drying and forced ventilation drying by an oven dryer and temperature of the oven dryer was set to 43, 60, 70, or 8$0^{\circ}C$. Moisture content of samples was reduced from ca. 20% to 15% at the end of drying, and additionally to 12.5 % for the drying at 8$0^{\circ}C$. Characteristics related to rice grain quality, milling recovery, ratio of broken and cracked rices, percentage of germination, and sensory scores of the cooked rices were evaluated. Yielding percentage of brown rice and polished rice remarkably decreased by drying at 8$0^{\circ}C$. Percentages of cracked rice and broken rice were within the criterion of the second grade government brown rice (20%) only in the sun dried and the rices dried at 43$^{\circ}C$, on the basis of damaged rice, opaque kernel rice and colored rice. Broken rice percentage of the polished rice was within the criterion for the standard of government rice (5%) in the sun dried and the rices dried at 43$^{\circ}C$. Germination percentage of rough rice was higher than 80% in sun drying and drying at 43$^{\circ}C$, but remarkably decreased by drying rice at 6$0^{\circ}C$ and over. Sensory palatability of the cooked rice decreased with increase in drying temperature. The present governmental method of judging rough rice on the basis of moisture content and appearance of the rough rice appears to be improved to include the ratio of broken and cracked rices.

• Korean Journal of Environmental Agriculture
• /
• v.1 no.1
• /
• pp.22-30
• /
• 1982

Water quality of downstream of the Nagdong river, using for agricultural irrigation of the Gimhae plain, were observed. Water temperature, turbidity, residue, pH, BOD, COD, DO, hardness, chloride, sulphate, phosphate, inorganic nitrogenous compounds, sodium, general bacteria, E. coli and heavy metals of the water were investigated at Daejeo, Sikman, Bongrim, Noksan, Machal and Jangyou pumping stations in the Gimhae plain in May, July and October, 1981. The results obtained were as follows; 1) Average value of analyzed components of the water at all sampling sites were 7.8 pH, 6.3 ppm BOD, 6.5 ppm COD, 6.4 ppm DO, 231 ppm hardness, 582 ppm Cl-, 412 ppm $SO_4--$, 2.32 ppm $PO_4---$, 3.8 ppm $NH_4+,\;478\;ppm\;Na+$, 2964 No. /100 ml total coliform, 0.0040 ppm Cd, 0.0066 ppm Pb, respectively. 2) The most heavily polluted site of all investigated ones was Sikman. It seemed to be caused by the vast quantity of wastewater discharged from industrial district in Gimhae city. The next polluted sites were Bongrim, Daejeo and Noksan, and comparatively less polluted sites were Machal and Jangyou, judging from both appearance and physicochemical observation. 3) At Sikman, the most heavily polluted site, average value of components were 8.0 pH, 8.1 ppm BOD, 8.2 ppm COD. These values were close to the limit point of agricultural water quality standard of 8.0 ppm BOD (COD). 4) Any apparent variation was not observed by the sampling season in most components except DO and $NH_4+$. DO of October was higher than that of May or July but $NH_4+$ was low. 5) $NH_4+$ content was comparatively high in downstream of the Nagdong river of which water is used as the agricultural irrigation in the Gimhae plain. Therefore, fertilizer application on the farming land must make account of nitrogen content of the irrigation water 6) It was considered that chloride and sodium contents would not influence the crop cultivation in common season, but in dry season irrigation must be done carefully.

• The Korean Journal of Air & Space Law and Policy
• /
• v.34 no.1
• /
• pp.39-77
• /
• 2019

Crew members engaged in international air transportation provide work in many countries due to the nature of their work. According to the Private International Act, the place where the employee habitually carries out his/her work plays an important role in the determination of the governing law of the international labor contract (Article 28, Paragraph 2) and in the decision of international jurisdiction (Article 28, Paragraphs 3 and 4). The concept of the place where the employee habitually carries out his/her work was proposed by the EU to determine international jurisdiction and governing law. In international aviation law, the legislative purpose of the place where the employee habitually carries out his/her work is different from that of home base, which is a concept introduced for fatigue management of the crew in order to secure the aviation safety; thus the place where the employee habitually carries out his/her work and home base are not the same concept. In order to determine the place where the employee habitually carries out his/her work, following matters should be considered comprehensively; (i) where the crew starts and ends work, (ii) where the aircraft the crew is performing work on is primarily parked, (iii) where the crew is informed of the instructions and organizes his/her work activities, (iv) where the crew is obliged to reside according to the labor contract, (v) where there is an office provided by the employer and available to the crew, (vi) where the crew is obliged to be when he/she is ineligible for the work or subject to discipline. However, since all of the above items are the same as the location of the home base, it is reasonable to consider the home base as the most important factor when deciding on the place where the employee habitually carries out his/her work. In contrast, the state where the aircraft is registered (Article 17 of the Chicago Convention), should not be regarded as a place of where the employee habitually carries out his/her work. In this case, CJEU provided the first judging standard for the concept of the place where the employee engaged in international air transportation habitually carries out his/her work. It is the interpretation of the Brussels regulations which became a model -for the Korean Private International Act,- so it would be helpful to understand the concept of the place where the employee habitually carries out his/her work.

• Archives of design research
• /
• v.2 no.1
• /
• pp.63-97
• /
• 1989

There is nothing more important than the form and function in design, because every design product can be done on the basis of them. Form and Function are already existed before the word of design has been appeared and all the natural and man-made things' basic organization is based on their organic relations. The organic relations is the source of vitality which identifies the subsistance of all the objects and the evolution of living creatures has been changed their appearances by the natural law and order. Design is no exception. Design is a man-made organic thing which is developed its own way according to the purposed aim and given situations. If so, what is the ultimate goal of design. It is without saying that the goal is to make every effort to contribute to the -human beings most desirable life by the designer who is devoting himself to their convenience and well-being. Therefore, the designer can be called the man of rich life practitioner. This word implies a lot of meanings since the essence of design is improving the guality of life by the man-made things which are created by the designer. Also, the things are existed through the relations between form and function, and the things can keep their value when they are answered to the right purpose. In design, thus, it is to be a main concern how to create valuable things and to use them in the right way, and the subject of study is focused on the designer's outlook of value and uk relations between form and function. Christopher Alexander mentioned the importance of form as follows. The ultimate object of design is form. Every design problem begins with an effort to achieve fittness between the form and its context. The form is the solution to the problem: the context defmes the problem. In other words, when we speak of design, the real object of discussion is not form alone, but the ensemble comprising the form and its context. Good fit is a desirable property of this ensemble which relates to some particular division of the ensemble into form and context. Max Bill mainatined how important form is in design. Form represents a self-contained concept, and its embodiment in an object results in that object becoming a work of art. Futhermore, this explains why we use form so freguently in a comparative sense for determining whether one thing is less or more beautiful than another, and why the ideal of absolute beauty is always the standard by which we appraise form, and through form, art itself. Hence form has became synonymous with beauty. On the other hand, Laszlo Moholy-Nagy stated the importance of function as follows. Function means the task an object is designed to fulfill the task instrument is shaping the form. Unfortunately, this principle was not appreciated at the same time but through the endeavors of Frank Lloyd Wright and of the Bauhaus group and its many collegues in Europe, the idea of functionalism became the keynote of the twenites. Functionalism soon became a cheap slogan, however, and its original meaning blurred. It is neccessary to reexamine it in the light of present circumstances. Charles William Eliot expressed his idea on the relations between function and beauty. Beauty often results chiefly from fittness: indeed it is easy to manitain that nothing is fair except what is fit its uses or functions. If the function of the product of a machine be useful and valuable, an the machine be eminently fit for its function, it conspicuously has the beauty of fittness. A locomotive or a steamship has the same sort of beauty, derived from the supreme fittness for its function. As functions vary, so will those beauty..vary. However, it is impossible to study form and function in separate beings. Function can't be existed without form, and without function, form is nothing. In other words, form is a function's container, and function is content in form. It can be said that, therefore, the form and function are indispensable and commensal individuals which have coetemal relations. From the different point of view, sometimes, one is more emphasized than the other, but in this case, the logic is only accepted on the assumption of recognizing the importance of the other's entity. The fact can be proved what Frank Hoyd wright said that form and function are one. In spite of that, the form and function should be considered as independent indivisuals, because they are too important to be treated just as the simple single one. Form and function have flexible properties to the context. In other words, the context plays a role as the barometer to define the form and function, also which implies every meaning of surroun'||'&'||'not;dings. Thus, design is formed under the influence of situations. Situations are dynamic, like the design process itself, in which fixed focus can be cripping. Moreover, situations control over making the good design. Judging from the respect, I defined the good design in my thesis An Analytic Research on Desigh Ethic, "good design is to solve the problem by the most proper way in the situations." Situations are changeable, and so is design. There is no progress without change, but change is not neccessarily progress. It is highly desirable that there changes be beneficial to mankind. Our main problem is to be able to discriminate between that which should be discarded and that which should be kept, built upon, and improved. Form and Function are no exception. The practical function gives birth to the inevitable form and the $$\mu$ti-classified function is delivered to the varieties of form. All of these are depended upon changeable situations. That is precisely the situations of "situation de'||'&'||'not;sign", the concept of moving from the design of things to the design of the circumstances in which things are used. From this point of view, the core of form and function is depended upon how the designer can manage it efficiently in given situations. That is to say that the creativity designer plays an important role to fulfill the purpose. Generally speaking, creativity is the organization of a concept in response to a human need-a solution that is both satisfying and innovative. In order to meet human needs, creative design activities require a special intuitive insight which is set into motion by purposeful imagination. Therefore, creativity is the most essential quality of every designer. In addition, designers share with other creative people a compulsive ingenuity and a passion for imaginative solutions which will meet their criteria for excellence. Ultimately, it is said that the form and function is the matter which belongs to the desire of creative designers who constantly try to bring new thing into being to create new things. In accordance with that the main puppose of this thesis is to catch every meaning of the form and function and to close analyze their relations for the promotion of understanding and devising practical application to gradual progression in design. The thesis is composed of four parts: Introduction, Form, Function and Conclusion. Introduction, the purpose and background of the research are presented. In Chapter I, orgin of form, perception of form, and classification of form are studied. In Chapter II, generation of function, development of function, and diversification of function are considered. Conclusion, some concluding words are mentioned.ioned.