• 한국게임학회 논문지
• /
• 제7권1호
• /
• pp.53-58
• /
• 2007

본 논문에서는 전력선 제어 통신 (PLC) 방법을 사용하여 원격지에서 조이스틱으로 게임을 제어하는 시스템을 구현하였다. 시스템의 구성은 원격지의 조이스틱과 컴퓨터 접속부 사이를 일반 가정용 전원 선로로 연결하고, 2400 bps 전송속도의 폴링 제어 기법을 사용하여 조이스틱의 명령을 읽어들이고, 음향 정보를 수신측 PLC 장치에 출력하였다. 게임 제어는 조이스틱의 좌, 우, 상, 하의 방향에 따라 비행기 캐릭터가 움직이고, 총알 발사 명령에 의해 총알을 발사하는 게임을 만들어 실행하였다. 이외에도, 16가지의 조이스틱 게임 조작 명령의 입력이 가능하며, 16가지의 출력 상태가 가능하였다. 게임 조작에 필요한 정보 전달은 약 100 msec 통신 지연에서도 문제가 없음을 확인하였다.

• 대한의용생체공학회:의공학회지
• /
• 제18권4호
• /
• pp.447-456
• /
• 1997

장애자나 노약자가 이동형의 재활보조 시스템을 조이스틱을 이용하여 직접 조작할 경우, 정상인과 달리 조이스틱 제어시 떨림이나 순간적인 오조작 (예를들면 조이스틱으로 손에서 놓치는 경우)이 자주 발생 하게 된다. 이러한 오조작이 그대로 전달될 경우 이동형 재활 보조시스템의 진동잉나 오동작을 초래하고, 특히 장애자나 노약자의안전성의 측면에서 문제로 대두된다. 따라서 본 연구에서는 이러한 문제점을 해결하기 위하여 장애자의 오조작 및 주위 환경과의 충돌을 방지하기 위하여 초음파 센서를 사용하여 물체와 이동 로봇의 접근 정도를 측정하고 이에 따라 이동 로보트가 물체에 접근하는 것을 방해할 수 있도록 모터부착형 조이스틱에 토오크를 걸어주는 조이스틱을 사용한 힘 반향 주행 기법을 제안하였다. 제안될 힘 반향 기법의 유효성을 입증하기 위하여 원통형의 전방 장애물과 복도의 벽면을 가상으로 만들고 이를 따라 조이스틱을 조작하여 주행실험을 하였으며, 그 결과 조작자의 숙련도의 차이는 있었으나 장애물 정보를 조이스틱을 통하여 조작자에게 전달됨을 확인함으로써 조작성능과 장애물에 대한 안전성이 향상됨을 알수 있었다.

• 드라이브 ㆍ 컨트롤
• /
• 제16권3호
• /
• pp.59-66
• /
• 2019

Hydraulic systems are essential for most of the construction equipments due to their various advantages, such as very powerful, quick response speed, precision control and remote control. Moreover, they are necessary to apply the electro hydraulic systems for precise and remote controls. Operating the small electronic joystick of the remote controller for the control of a multipurpose work machine with remote control technology increases the possibility of a sudden operation compared to the use of a conventional hydraulic joystick. When a joystick is suddenly operated, the peak pressure is generated in the system due to the quick response of the system. Then a vibration is generated due to the peak pressure, which causes instability to the operation of the construction equipment. Therefore, in this study, we confirmed the level of reduction of peak pressure occurring in the electro hydraulic system by using AMESim, when the output signal of the step shape generated by the sudden operation of the electronic joystick was changed by using the convolution operation.

• 제어로봇시스템학회논문지
• /
• 제19권7호
• /
• pp.605-613
• /
• 2013

This research proposes a vibration pattern algorithm to implement the haptic joystick to control a mobile robot at the remote site without watching the navigation environment. When the user cannot watch the navigation environment of the mobile robot, the user may rely on the haptic joystick solely to avoid obstacles and to guide the mobile robot to the target. To generate vibration patterns, there is a vibration motor at the bottom of the joystick which is held by the user to control the motion direction of the mobile robot remotely. When the mobile robot approaches to an obstacle, a pattern of vibration is generated by the motor, and by feeling the vibration pattern which is determined by the relative position of the mobile robot to the obstacle, the user can move the joystick to avoid the collision to the obstacle for the mobile robot. To generate the vibration patterns to convey the relative location of the obstacle near the mobile robot to the user, Fuzzy interferences have been utilized. To measure the distance and location of the obstacle near the mobile robot, ultrasonic sensors with the ring structure have been adopted and they are attached at the front and back sides of the mobile robot. The precise location of the obstacle is obtained by fusing the multiple data from ultrasonic sensors. Effectiveness of the proposed algorithm has been verified through the real experiments and the results are demonstrated.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1509-1512
• /
• 2003

The electric power wheelchair needs to control motor torque and speed for responding to variable actions given by handling a joystick. In this paper a DSP-based BLDC motor controller using a single dc-link current sensor is presented for electric power wheelchair. It is composed by a DSP processor and three-phase inverter module. To control torque, high speed current control is achieved by the PI controller and pulse width modulation (PWM) signals with 25 kHz carrier frequency, which is performed by 200 ${\mu}sec$ cycle. The speed controller computes the new direct current reference from the speed error and the PI control equation. The displacement value by handling the joystick is converted to reference speeds of right and left wheel motors using nonholonomic wheelchair kinematics. Experimental results show that the presented control system is enough to implement a speed servo in wheelchair driving.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.171.1-171
• /
• 2001

This paper describes the design and implementation of a new type of a force reflective joystick. It has single degree of freedom that is actuated by motor and brake pair. The use of motor and brake allows various objects to be simulated without the stability problem and related safety issues involved with high torque motors only. The joystick performance is measured by its ability to simulate various test objects. Simple test objects are modeled as a benchmark test of the system´s performance and to evaluate different control approaches for hybrid motor/brake actuator. The force output joystick is capable of simulating forces in a variety of virtual environments. This device demonstrates the effectiveness of a hybrid motor/brake haptic actuator.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1823-1824
• /
• 2008

We propose a remote controlled robot manipulator using force feedback joystick. User can control easily 5 d.o.f robot manipulator in 3 demensional space using general joystick. A force sensor attached in developed gripper sends signal to main robot controller so as to know gripper grasp the object. The signal also sent to user through force feedback joystick. We designed a dexterous 5 d.o.f robot manipulator analysis the kinematics and inverse kinematics. The robot was simply developed using serial RC motor. As a main robot controller, we use 32bit MPU(AT91SAM7256) and micro C/OS. To show the validity of our developed robot, a several experiments were demonstrated.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.55-56
• /
• 2010

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2013년도 전력전자학술대회 논문집
• /
• pp.212-213
• /
• 2013

This paper proposes the algorithm of torque distribution in the electric wheel-chair using 2D joystick for drive safety. For the accurate driving performance, the specific and precise torque distribution is required in both wheels depending on signals of X-Y axis that is generated from 2D joystick. The signals of X-Y axis from joystick are transformed into the propulsion force and the torque reference. And the torque reference can be generated through the dynamic model of wheel-chair. The optimal dynamic characteristics of the electric powered wheelchair can be obtained, by adjusting the sensitivity coefficients of propulsion force and torque reference, In addition, the system takes smooth and stable control characteristics due to continuous torque output at all directions of joystick. The several simulations verify the usefulness of the proposed algorithm about torque distribution.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1998년도 제13차 학술회의논문집
• /
• pp.340-345
• /
• 1998

A virtual reality system is implemented for the operator supervising a robot's operation at a remote site. For this implementation, a two D.O.F force-reflective joystick is designed to reflect the force/torque measured at the end of robotic manipulator and to generate the motion command for the robot by the operator using this joystick. In addition, the visual information that is captured by a CCD camera, is transmitted to the remote operator and is displayed on a CRT monitor. The operator who is holding the force reflective joystick and watching the CRT monitor can resolve unexpected problems that the robot confronts with. That is, the robot performs the tasks autonomously unless it confronts with unexpected events that can be resolved by only the operator. To demonstrate the feasibility of this system, a remote peg-in-hole operation is implemented and the experimental data are shown.