• Journal of Korean Society of Water and Wastewater
• /
• v.27 no.6
• /
• pp.787-796
• /
• 2013

Sewer joint-related defect is one of the most common domestic sewer defects along with the lateral pipe problem. However, there are currently no criteria that precisely assess the joint-related sewer defects. Therefore, this study examined the joint-related sewer defects found in domestic circumstances, classified them according to the suggested defect code, and presented the examples of defect pictures. Each defect code was organized as the process of out of pipeline alignment (OPA) which shows the progress in deterioration. Each defect was classified into 5 grades depending on appropriate repair and rehabilitation method. The result of this study is expected to be useful for domestic CCTV inspectors to assess the sewer condition and helpful for managers to make a decision of repair and rehabilitation.

• Journal of Welding and Joining
• /
• v.14 no.6
• /
• pp.37-47
• /
• 1996

An ultrasonic testing uses the directivity of the ultrasonic wave which propagates in one direction. The directivity is expressed as the relationship between the propagate direction and its sound pressure. The directivity of ultrasonic wave is related to determination of testing sensitivity, scanning pitch and defect location. This paper investigated the directivity of ultrasonic wave, which scattered from slit defect located in heat-affected zone (HAZ) in butt joint using visualization method. The directivity of shear waves scattered from slit defect were different according to probe direction (far defect, near defect) and probe position (forward movement, maximum echo position, backward movement). The difference of directivity of reflection wave was existed between 2 MHz and 4 MHz angle probes. In the case of 2 MHz angle probe, the directivity of reflection wave was appeared sharp form because of the relation wave length and defect size.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.2C no.5
• /
• pp.239-245
• /
• 2002

In this work, in order to realize the possible defects at the cable joint interface, four different types of artificial defects are provided : conducting, insulating substances, void and scratches. The analysis related to the PD patterns has been performed by means of conventional Phase Resolved Partial Discharge Analysis (PRPDA) and Chaotic Analysis of Partial Discharge (CAPD) as well which was proposed by our previous communication. As a result, it could be pointed out that each defect has shown particular characteristics in its pattern respectively and that the nature of defect causing partial discharge could be identified more distinctively when the CAPD is combined with the conventional statistic method, PRPDA.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.15 no.2
• /
• pp.378-385
• /
• 1995

The ultrasonic non-destructive testing uses the directivity of the ultrasonic pulse wave which propagates in one direction. The directivity is expressed as the relationship between the propagate direction and its sound pressure. The directivity of ultrasonic wave is closely related to determination of probe arrangement, testing sensitivity, scanning pitch and defect location and characterization. The paper measured the directivity of shear wave, which reflected from artificial defect located in weld metal zone in butt welded joint similar model made of pyrex glass by using visualization method. 2 MHz and 4 MHz angle probes were used to measure the directivity of reflection wave at the artificial defect. The directivity of shear waves reflected from the defect was different according to the probe position and the shape of butt welded joint. The difference of directivity of reflection wave was existed between 2 MHz and 4 MHz angle probes. The angle of reflection wave became equal to angle of incidence as increase of the height of excess metal.

• Archives of Reconstructive Microsurgery
• /
• v.21 no.2
• /
• pp.143-148
• /
• 2012

Purpose: This report presents the authors' experience of twelve patients with sural artery flap for soft tissue defects around the knee joint. Materials and Methods: The patients' age ranged from 25 to 80 years; seven of the patients were male and five were female. The cause of soft-tissue defects involved wide excision for malignant soft tissue tumor, tumor prosthesis related infection, infection after total knee arthroplasty and chronic osteomyelitis. Postoperative range of motion was checked. The sensibility of flap was evaluated by Semmes-Weinstein monofilaments and two-point discrimination. Results: All flaps survived and provided satisfactory coverage of the defect. There was no complication except one delayed skin graft incorporation at donor site. Seven knee joints which had been stiff previously gained average 58 degrees of ROM postoperatively. All flaps retained sensibility and showed no significant increase in sensory thresholds comparing with contralateral side. Conclusion: Sural artery flap not only shows high survival rate and broad coverage ability, but also offers improvement in range of motion and preservation of sensation. We speculate that sural artery flap is valuable for the reconstruction of the soft tissue defects around knee joint.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.42 no.4
• /
• pp.209-214
• /
• 2016

Traumatic bone cyst (TBC) occurs preferentially on the mandibular symphysis and body, but rarely on the mandibular condyle. When TBC occurs in the condylar area, it can usually be related with or misdiagnosed as a temporomandibular joint disorder. A 15-year-old female patient visited the Temporomandibular Joint Clinic with a 5-year history of pain and noise localized in the left temporomandibular joint. On imaging, a well demarked oval-shaped radiolucent lesion was observed on the left condyle head. The patient underwent cyst enucleation and repositioning of the bony window on the lateral cortex of the affected condyle head under the impression of subchondral cyst or TBC; however, no cystic membrane was found. The bone defect resolved and showed no recurrence on the serial radiographic postoperative follow-up for 43 months after surgery.

• Archives of Reconstructive Microsurgery
• /
• v.17 no.1
• /
• pp.7-13
• /
• 2008

Popliteal artery injury in blunt trauma of knee joint is not common but poses high rate of amputation due to anatomical characteristics or delayed diagnosis and treatment. The aim of the present study is to review the authors' experiences with this condition and identify factors contributing to disability. We reviewed 7 cases of popliteal artery injury in trauma around knee. Injury mechanism, type of vessel damage, associated injuries, mangled extremity severity scores (MESS), ischemic time and additional treatments were analyzed. Tibial fracture, distal femoral fracture and serious soft tissue defect were combined. Mean MESS was 9.9 point and mean time of revascularization was 7.1 hours. Transfemoral amputation was performed in 2 cases due to vascular insufficiency and devastating infection, and 4 patients were able to walk without any support at the last follow up. Age, the severity of soft tissue injury, ischemic time and MESS are thought to be related to prognosis, and young patients with short ischemic time show best results, but authors experienced one exceptional case. We have to consider multiple factors related to the prognosis in popliteal artery injury with fractures around knee, and careful decision is needed regarding to early amputation.

• The Journal of the Korean bone and joint tumor society
• /
• v.3 no.1
• /
• pp.32-38
• /
• 1997

PURPOSE : For the reconstruction of large bone defect after tumor resection, it is possible to reuse the bone involved by tumor with some treatment to it. Several bone-reusing methods have been reported such as autoclaving, low-heat treatment(pasteurization) and intraoperative radiotherapy. We have used extracorporeally radiated autogenous bone graft for reconstruction after tumor resection, and analyzed the periods for junctional union, functional results and complications to know the indications of this method. METHODS : From Dec. 1993 to Sept. 1995, nine patients had taken autogenous bone graft with extracorporeal irradiation. Eight cases were osteosarcoma and 1 giant cell tumor. The graft sites were 5 in femur, 3 proximal tibia and 1 femur and tibia. Stage 3 was 1 case(GCT), Stage IIB 3 and Stage IIIB 5. After wide resection, surrounding soft tissue and intramedullary and extramedullary portion of the tumor were removed. Radiation was done in 5000cGy to the resected bone. Ender nails and bone cement were inserted and filled into the medulla to prevent fracture. RESULTS : Average follow-up period was 12.3(4 to 21) months. Average junctional union period in simple X-ray was 6.5 months in 4 cases. Average functional score following Enneking's criteria was 19(12-27). Complications were as follows ; condylar fractures and femur neck fracture in 4 cases, subluxation of the knee joint 3 and infection 1. Although local recurrence was detected in 1 case, the site of recurrence was not in the radiated bone but surrounding soft tissue. At final follow-up, no recurrence was found in one case(GCT), CDF 2, AWD 2, DOD 3, and died of chemotherapy related sepsis 1. CONCLUSIONS : Extracorporeally radiated bone autograft is considered to be a method for reconstruction of the large bone defect made by tumor resection, especially in the reconstruction around the joint.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.545-550
• /
• 2002

In order to ensure the signal could be transported cocrrectly, the microwave devices made of Aluminmn alloys must be assembled and brazed flaw-freely. In this paper, a new approach of using contact reactive brazing (CRB) process to realize the compact brazing of Aluminum alloys was put forward. The reason for this is that CRB, which realizes bonding depending on the liquid alloy produced by metallurgy reaction between the materials to be joined, overcomes the limitation of traditional brazing that the macroscopically disorganized filling flow of liquid filler metal would result in defects in brazed seam. Joint ofLF21 (AA3003) with the compactness of over 95% was brazed by the method of CRB using Si powder as an interlayer. At last, the influence of the physical parameter related to the Si powder interlayer on the compactness of the joints was investigated in detail.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.29 no.1
• /
• pp.9-13
• /
• 2018

Postoperative airway aspiration is not uncommon in patients with head and neck cancer. Airway aspiration has serious consequences, such as swallowing disorders, nutrition-related health problem, or reducing the quality of life due to maintenance of tracheal or nasogastric tubes. The postoperative oropharyngeal defect due to the surgery may interfere with normal swallowing reflex, or the laryngeal dysfunction caused by radiation therapy may cause severe airway aspiration, which may lead to complications such as dyspnea and pneumonia. Complete removal of the disease is also important in the treatment of head and neck cancer, but it is necessary to select a method to avoid and predict the occurrence of airway aspiration according to the treatment method. The most important factor to prevent airway aspiration after surgery is to preserve the proper volume of the oropharynx and to preserve at least one of the cricoarytenoid joint function. It is also the most effective way to reduce additional complications by seeking appropriate surgical treatment according to airway aspiration status. The purpose of this study is to review the operative methods that can induce airway aspiration and consider the prevention and treatment strategy through review of the literature.