• Journal of the Korean GEO-environmental Society
• /
• v.9 no.4
• /
• pp.5-13
• /
• 2008

Just as infill material can reduce the shear strength of a rock joint, a layer of soft material between concrete and the surrounding rock socket can reduce pile shaft resistance of drilled shafts socketed in rocks. This can also result from construction methods that leave smeared or remoulded rock or drilling fluid residue on the sides of the rock sockets after concrete placement. The nature of the interface between the concrete pile shaft and the surrounding rock is critically important to the performance of the pile, and is heavily influenced by construction practice. Characteristics of the concrete-rock interface, such as roughness and the presence of the soft materials deposited during or after construction can significantly affect the shaft resistance response of the pile. In this study, we conducted the parametric study to examine the performance characteristics of drilled shafts socketed in smeared rock under the vertical load with the code of finite difference method of FLAC 2D. As the results of the current research, the parameters that affect the settlement of the pile head and the ultimate unit shaft resistance could be identified.

• Clinics in Shoulder and Elbow
• /
• v.20 no.3
• /
• pp.126-132
• /
• 2017

Background: The aim of the present study was to determine the correlation between the amount of pain reduction after local anesthetic injection into the subacromial space preoperatively and clinical outcome after arthroscopic rotator cuff repair. Methods: A total of 127 patients who underwent arthroscopic rotator cuff repair and followed up at least 1 year were analyzed retrospectively. Preoperatively, a visual analogue scale (VAS) for pain was measured in all patients before and after the ultrasound guided impingement test. The participants were divied into four groups according to pain reduntion ater impingement test (Group A: >75%, Group B: 50%-75%, Group C: 25%-50%, Group D: <25%). VAS for pain, shoulder range of motion, shoulder isometric strength, ASES score were evaluated preoperatively and at 3, 6, 9, and 12 months postoperatively. Results: After surgery, the amount of pain reduction shows significantly at 3, 6 months in Groups A, B as compared to Groups C, D (p<0.05). Among the range of motion of shoulder joint, forward flexion was significantly improved in Group A at 3 months (p<0.05). The ASES score significantly improved at 3, 6 months in Groups A, B as compared to Group C, D (p<0.05). Conclusions: Preoperative degree of pain reduction after impingement test correlates with the improvement of pain after arthroscopic rotator cuff repair, especially in the early phase. Therefore, the impingement test could be effectively used.

• Korean Journal of Acupuncture
• /
• v.37 no.3
• /
• pp.159-171
• /
• 2020

Objectives : This study aimed to understand the characteristics of the cases covered in the case studies on traditional Korean medicine (TKM) and furthermore, to provide basic information that can lead the discussion on 'what cases are worth reporting' in future case reports. Methods : Case reports on TKM were searched using the OASIS. The searched researches were analyzed according to the type of case, including information on disease/symptoms and intervention. Results : A total of 940 researches were searched. The most frequently reported type of case study was the report on the effectiveness of intervention. Case reports, which were only two cases in the 1970s, increased rapidly in the 2000s, and in particular, 314 cases within the last five years accounted for about 33% of the total literature. As for the number of studies by disease, the cases dealing with musculoskeletal diseases such as spine, shoulder and knee joint disorders were the most prevalent. Besides, there were many case reports related to cardiovascular, gynecological, cancer, psychiatric, and dermatological diseases. In a total of 51.9% of the included case reports, a combination of two or more Korean medical treatments such as acupuncture and herbal medicine was used at once, and western treatment was used with Korean medical treatment in 28.2% of the studies. The types of Korean medical treatments were varied, such as acupuncture, moxibustion, pharmacopuncture, electroacupuncture, Chuna, acupotomy, herbal medicine, external preparation, and psychotherapy. The main purpose of the publication of the included case reports was analyzed as a report of TKM treatment for rare diseases, or the application of TKM treatment to diseases or symptoms that are "uncommon in TKM treatment" even if it is not a rare disease. Conclusions : Case reports have the strength of generating new scientific hypotheses by detecting the basic needs and novelty of medicine. The current case studies of TKM do not seem to be sufficient to highlight these strengths. It is necessary to discuss which cases are reported as cases of patients worth publishing, and based on this, it is necessary to activate case studies of TKM by utilizing diagnostic tools and science technology.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.5
• /
• pp.93-98
• /
• 2013

Fuel gas is an important energy source that is being increasingly used because of the convenience and clean energy provided. Natural gas is supplied to consumers safely through an underground gas-pipe network made of a polyethylene material. In electrofusion, which is one of the joining methods used, copper wire is used as the heating wire. However, it takes a long time for fusion to occur because the electrical resistance of copper is low. In this study, therefore, electrofusion was conducted by replacing the copper heating wire with carbon fiber to reduce the fusion time and improve the production when joining large pipes. Fusion and tensile tests were performed after the electrofusion joint was made in the polyethylene pipe using carbon fiber. The results showed that the fusion time was shorter and the temperature inside the pipe was higher with an increase in the current value. The ultimate tensile strength of specimens was higher than that of virgin polyethylene pipe, except for polyethylene pipes joined using a current of 0.8 A. The best fusion current value was 0.9 or 1.0 A because of the short fusion time and lack of transformation inside the pipe. Thus, it was shown that carbon fiber can be used to replace the copper heating wire.

• Korean Journal of Metals and Materials
• /
• v.48 no.12
• /
• pp.1056-1063
• /
• 2010

We present a new joining method for Pd-Cu membrane foils used as permeation tubes to collect $CO_2$. Since foils have poor mechanical strength, joining should be done at low temperatures to reduce residual stresses and without joining pressure. This contradicts the well known conditions for good contact between base materials that determines joint qualities. We selected Sn-Ag-Cu alloys that are highly reactive with Pd and Cu as a filler metal. As the filler melts at joining temperatures as low as $220{\sim}280^{\circ}C$, Pd and Cu are dissolved into the melt and react with the filler elements, which raises the melting temperature of the filler based on eutectic structures among the elements. Then, isothermal solidification progresses for the rest of the joining time. Intermetallic compounds (IMC) in the joints, one of the main factors for brittle joints, are inevitably formed. However, by optimizing both joining time and temperature, we balanced the wettability with IMC. Sealing test results confirmed that the joints are mechanically reliable during operation.

• Steel and Composite Structures
• /
• v.33 no.3
• /
• pp.445-461
• /
• 2019

The ultrasonic guided wave-based technique has become one of the most promising methods in non-destructive evaluation and structural health monitoring, because of its advantages of large area inspection, evaluating inaccessible areas on the structure and high sensitivity to small damage. To further advance the development of damage detection technologies using ultrasonic guided waves for the inspection of welded components in structures, the transmission characteristics of the ultrasonic guided waves propagating through welded joints with various types of defects or damage in steel plates are studied and presented in this paper. A three-dimensional (3D) finite element (FE) model considering the different material properties of the mild steel, high strength steel and austenitic stainless steel plates and their corresponding welded joints as well as the interaction condition of the steel plate and welded joint, is developed. The FE model is validated against analytical solutions and experimental results reported in the literature and is demonstrated to be capable of providing a reliable prediction on the features of ultrasonic guided wave propagating through steel plates with welded joints and interacting with defects. Mode conversion and scattering analysis of guided waves transmitted through the different types of weld defects in steel plates are performed by using the validated FE model. Parametric studies are undertaken to elucidate the effects of several basic parameters for various types of weld defects on the transmission performance of guided waves. The findings of this research can provide a better understanding of the transmission behaviour of ultrasonic guided waves propagating through welded joints with defects. The method could be used for improving the performance of guided wave damage detection methods.

• Journal of Korea Port Economic Association
• /
• v.23 no.2
• /
• pp.41-61
• /
• 2007

After the joining in the WTO of China, the container throughputs have begun to increase notably and Continuous developments of China ports are influencing operation and policy of Korea ports. At this point Pyeongtaek Dangjin port which has potency as China trading port confronts with turning point of port development as new port. To this, correct need grasping of North China shippers is important strategic element of PyeongTaek Dangjin Port activation. In this study, there is purpose to present Pyeongtaek Port's activation strategy by grasping customer needs executing questionnaire to China local company about Pyeongtaek Dangjin Port. As a research result, Pyeongtaek Dangjin Port possesses high geographical strength but has problems like development delay, tribe of various route, absence of marketing strategy. To solve this problem, this paper proposes expansion of port and logistics physical distribution equipment, improvement of services, foundation of joint logistics center, establishment of marketing organization etc. Namely, it may overcome only new port's limitation though develop to port of cargo creation style that is not simple cargo dependence style port.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.2
• /
• pp.67-73
• /
• 2011

This study aims to develop an economical precast hollow concrete column with high constructability which consists of only splice sleeve and general reinforcing bar without using PC tendons in order to reduce the construction period and cost. With this purpose, this study performed the finite element analysis and tension test by using some variables such as length of sleeve, diameter of rebar and curing method for suggesting a grouting type splice sleeve which is a new type joint rebar and developing an optimized splice sleeve. As a result, the analysis on the tension performance of splice sleeve did not show any destruction caused by pull-out in reinforcing bar but it only occurred destruction of tension bar or bolt shear rupture from the mechanical defect of sleeve. Therefore, the experiment showed high performance in tension of the suggested splice sleeve and verified the application of precast hollow concrete column.

• Physical Therapy Rehabilitation Science
• /
• v.8 no.2
• /
• pp.61-66
• /
• 2019

Objective: The purpose of this study was to investigate the effects of resistance applied in various directions on lower extremity muscle activity and balance during squat exercise performance. Design: Cross-sectional study. Methods: Forty-one adults (19 males and 22 females) agreed to the study purpose and procedures. All subjects randomly performed squat exercises with an intensity of overcoming 10% of body weight resistance pulled forward, backward and general squats with $60^{\circ}$ of knee joint flexion. Electromyography was used to measure muscle activity of the vastus medialis oblique (VMO), rectus femoris (RF), vastus lateralis oblique (VLO), biceps femoris (BF), and semitendinosus (ST) muscles. The Wii Balance Board was used to assess balance during the three-method squat operation. Each operation was measured three times for 10 seconds. Results: There were significant differences in muscle activities of the VMO, RF, VLO, ST and balance ability with the application of three directions of resistance (p<0.05). Post hoc comparisons revealed that squats performed with resistance pulled in the backward direction resulted in higher VMO, RF and VLO activity than with the resistance placed in a pulled forward direction (p<0.05). In the ST, resistance applied in the pulled forward direction showed greater muscle activity compared to the pulled backward direction (p<0.05). With balance, squats performed with resistance pulled in the forward direction showed greater muscle activity than with resistance applied in the pulled backward direction and during general squat performance (p<0.05). Conclusions: In this study, squat exercises performed with resistance applied in the direction of pulling backwards was found to be the most effective in improving quadriceps muscle strength and balance. It is effective to provide resistance that is placed in the forward when it is difficult to perform a general squat due to weakness of the quadriceps.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.25 no.1
• /
• pp.71-76
• /
• 2019

Background: An 8-year-old girl had severe neck pain and stiffness after trauma. CT scan showed atlantoaxial rotatory subluxation (AARS). She had conservative treatment because she did not have neurological symptoms and spinal basilar artery dysfunction. Conservative therapy was halter traction twice for 4 weeks. However, pain and stiffness persisted. She had been recommended to have surgery from her physician, but she received manual therapy for non-surgical procedures. Methods: The joint mobilization, muscle energy technique, motor control exercise, and deep neck flexor (DNF) endurance exercise were applied as manual therapy and 10 session for 2weeks. Results: Clinical outcomes were measured at initial baseline, after 2 weeks, and after 6weeks. Active range of motion was completely restored after 6weeks and numeric pain rating scale was completely reduced after 2 weeks. The strength of neck flexor muscle recovered to normal after 2 weeks, and the DNF endurance was improved to 25 seconds after 2 weeks and to 42 seconds after 6weeks. Motor control capacity recovered to 30 ㎜Hg after 2 weeks. Conclusions: This case report describes the immediate and short-term clinical outcomes for a patient presenting with symptoms of neck pain following AARS. Clinical rationale and patient preference aided the decision to incorporate manual therapy as a treatment for this patient. Manual therapy has shown a successful recovery in AARS patients, more research is needed to validate the inference of this case report.