• 제목/요약/키워드: Joint design

검색결과 2,640건 처리시간 0.036초

지역, 방위, 기준층, 단열재, 기밀등 요소변화에 따른 1차에너지 변화량 과 연관성 연구 (A Study on the Primary Energy Change Amount and Grade Correlation following Factor Changes such as Area, Point of the Compass, Standard Layer, Insulation, Airtight Joint and Others)

  • 김대원;정광섭;김영일;남아리새;김성민;조영욱
    • 에너지공학
    • /
    • 제24권4호
    • /
    • pp.183-191
    • /
    • 2015
  • 친환경적이면서 영구적인 저에너지 절약방안에 대한 연구는 지금도 미래도 영원한 과제일 것이다. 다만 그 절차에 있어 누구나 쉽게 접근이 가능하고 절감요소를 적용함으로서 사용자에게 가시적인 이익이 나타내는 생활밀착형 절감기술이 요구되고 있다. 정부의 정책에 있어 기존건축물 에너지성능 개선은 그 절차가 복잡하고 전문가에 의뢰시 소요비용과 신뢰성 문제가 야기 되었다. 이에 따라 본 연구는 유즈가 간단히 프로그램에서 내가 교체하고픈 부위 요소만 선택하면 에너지변화량과 등급예측을 가능하게 함으로서 개인별 취향에 따른 맞춤형 설계가 가능하게 하여 언제 어디서나 간단하고 편리한 에너지개선안을 제시하고자 한다.

동작에 따른 피부변화 분석을 통한 동작센서 부착의 최적위치 탐색: 조정 동작을 중심으로 (An Exploratory Study of Searching Human Body Segments for Motion Sensors of Smart Sportswear: Focusing on Rowing Motion)

  • 한보람;박선형;조현승;강복구;김진선;이주현;김한성;이해동
    • 감성과학
    • /
    • 제20권1호
    • /
    • pp.17-30
    • /
    • 2017
  • 하이테크놀로지를 여러 가지 다른 영역과 융합하고자 하는 노력이 다양한 연구 분야에서 시도되고 있으며, 스포츠웨어를 개발함에 있어 운동선수의 운동능력을 향상시키기 위한 분야에 이러한 첨단 기술들이 도입되고 있다. 본 연구는 스포츠 훈련에 도움이 되는 동작 센싱 스마트 스포츠웨어를 개발하기 위한 기초 연구로서, 조정 동작 시 관절의 움직임을 측정할 수 있는 동작 센서를 부착하기 위한 인체상의 최적 위치를 탐색하는 것을 목적으로 한다. 본 연구에서는 일관된 동작을 반복적으로 수행할때 관절의 변화가 큰 조정을 대상 스포츠로 선정하였으며, 조정 선수의 대표 체급인 중량급과 경량급의 피험자를 선정하여 동작에 따른 피부의 변화율을 측정하여 체급별 차이를 분석하였다. 먼저, 3차원 모션캡처 시스템을 이용하여 조정 동작 시 등, 팔꿈치, 엉덩이, 무릎 부위의 피부 변화를 촬영하고, 각 마커 간 거리의 변화율을 분석함으로써 체급에 따른 차이를 보이지 않으면서 동작에 따라 피부의 변화가 큰 부분을 인체 상에 도시하였다. 이를 바탕으로 동작 센싱용 스마트 스포츠웨어를 위한 센서 부착의 가이드라인을 제시하였다.

상관결과의 왜곡 방지를 위한 재양자화 방법에 관한 연구 (A STUDY ON THE RE-QUANTIZATION METHOD FOR PREVENTING DISTORTION OF CORRELATION RESULT)

  • 염재환;오세진;노덕규;오충식;정진승;정동규
    • 천문학논총
    • /
    • 제27권5호
    • /
    • pp.419-429
    • /
    • 2012
  • In this paper, we propose a new re-quantization method after FFT processing to prevent the distortion of correlation result of VCS (VLBI Correlation Subsystem). The re-quantization is used to rearrange the data bit so as to reduce the data rate processed as 16-bit of FFT result of VCS. Having done this procedure, we found that the distorted spectrum of correlation result occurred in the delay tracking experiments by the re-quantization method introduced for initial design of VCS. In order to solve this, two kinds of re-quantization method, that is, the comparison and selection-type, are proposed. The first is to re-quantize the FFT result as a valid-bit by comparing with the input data after determining the adequate threshold. The second is manually to select the valid-bit of FFT result after finding the valid-field of data according to the bit-distribution of input data. We confirmed that the second is more effective compared with the first through the experimental result, and it will be implemented without so much modification of applied method in the condition of the limited resource of FPGA. The re-quantization is, however, carried out with 4-bit in the proposed second method for FFT result, and then the distortion of correlation result is also appeared. To fix this problem, the bit for re-quantization is extended to 8-bit. The proposed 8-bit selection-type is effectively verified so that the distortion of correlation result disappeared by applying to VCS in consequence of the simulation and correlation experiments.

농업분야 소규모 협동조합 유통체계 구축을 위한 우선순위 평가 (Evaluating Policy Priorities in Small Agricultural Cooperatives for Distribution Systems)

  • 김창환;황대용
    • 유통과학연구
    • /
    • 제13권12호
    • /
    • pp.65-71
    • /
    • 2015
  • Purpose - Domestic cooperatives tend to increase during the establishment of cooperatives and gradually through the basic law of social needs. However, only cooperatives' qualitative grow this secured without blessings, and their quantitative growth through government support is questionable. The purpose of this study is to analyze the agricultural cooperatives established through the Distribution System Cooperatives Basic Law, which was enacted in January 2012. Subsequently, establishing agricultural cooperatives was done briskly. However, cooperatives established rapidly after the founding of the Basic Law encountered problems. Research design, data, and methodology - To assess the performance of selected agricultural cooperatives, data were analyzed using the methodological Analytic Hierarchy Process (AHP) approach. The AHP is a set of systematic procedures to hierarchically analyze the elements of any problem. Using a survey on expertise, a series of comparative determinations of each pair is performed to evaluate the relative strengths and the strengths of the impact between elements within the hierarchy. A survey was conducted on 10 small agricultural cooperatives using AHP analysis for the examination. The purpose of such research and analysis is to recommend a direction for future policies aimed at small agricultural cooperatives. Result - This study applied three types of policy evaluation criterion, including market expansions, organizations, and cooperative projects, and 12 types of small agricultural cooperative policy measures. Market expansion policies for agricultural cooperatives are classified into four categories: school meals, direct transactions, shopping malls, and wholesale markets. Organizational policies for agricultural cooperatives are classified into four types: existing sales channel management, education, preventing free riding, and enlarging members. Cooperative project policies in agricultural cooperatives are classified into four policy areas: cooperation between cooperatives, community contribution, joint businesses, and government links. In this paper, the growth priority in agricultural cooperative policies is analyzed by applying policy evaluation criteria on the basis of a survey on expertise. The priorities of the policy program are also analyzed using a decision analytic hierarchy process. The results indicate that market expansion is the most important policy evaluation criterion therefore, improving direct transactions, school meals, management of existing sales channels, and shopping malls are crucial policy measures. In contrast, the cooperation of cooperatives, expansion of union members, and cooperation with the government were found to have low priority. Conclusions - Agricultural cooperatives should develop plans as follows. Small agricultural cooperatives need to secure school meals and direct transactions for market expansion, restructure marketing strategies to manage existing sales channels, and, finally, increase education and training for sustainable organizational development. This study has the following limitations. Because the subject of the investigation is a new cooperative, determining its sustainable growth is difficult. Therefore, through analysis and a continuous study of cooperatives, future research is expected to show that modifying the direction of agriculture cooperatives is necessary.

궤도 유지보수 주기 예측을 위한 구간 특성에 따른 궤도틀림 표준편차 진전정도 분석 (Study for Progress Rate of Standard Deviation of Irregularity Based on Track Properties for the Railway Track Maintenance Cycle Analysis)

  • 정민철;김정훈;이지하;강윤석;공정식
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제16권3호
    • /
    • pp.31-40
    • /
    • 2012
  • 궤도틀림은 열차의 주행안전 및 승차감에 미치는 영향이 크고, 소음 진동의 주요원인으로 작용한다. 따라서 현장에서 발생하는 궤도의 틀림을 체계적으로 분석함으로써 이를 저감할 수 있도록 차량운행 조건과 선로선형 및 궤도구조를 설계하는 것은 중요한 과제이다. 현재 국내에서 EM-120에 의해 검측된 틀림 데이터는 매우 불규칙적인 형태를 나타내며 데이터 분석 시 다양한 문제점을 가지고 있다. 본 연구에서는 궤도의 효율적인 유지관리를 위해 검측된 틀림데이터의 효율적인 처리 기법을 개발하고, 정제된 데이터를 이용해 선로를 구성하고 있는 이음매, 도상, 노반, 체결구 등의 요소를 고려하여 레일 궤도 틀림의 진전 정도를 정량화 하였다. 또한 축적된 검측 데이터로부터 궤도의 건전도를 평가할 수 있는 방법을 정립하고 잔존수명을 예측하여 효율적 유지관리를 실현하기 위하여 검측 데이터의 확률론적 수명 산정 기법 개발 및 데이터를 이용한 구간 특성에 따른 궤도틀림 표준편차의 틀림 진전 정도에 대한 통계 및 확률적 분석을 수행하였다.

개단면리브를 갖는 강바닥판 교량의 국부거동 분석 및 피로균열 보강방안 (Local Behavior of Structural Details for Orthotropic Steel Deck Bridge with Longitudinal Rib of Open Section and Retrofitting Method of Fatigue Cracks)

  • 이성진;경갑수;이희현;전준창
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제17권2호
    • /
    • pp.33-44
    • /
    • 2013
  • 강바닥판의 구조상세에 대하여 많은 연구가 이루어지고 있으나, 대부분의 연구가 표준형의 U-rib를 대상으로 실시되었을 뿐, 강바닥판 건설초기의 개단면리브형식에 대한 연구는 미진한 것으로 조사되었다. 본 연구에서는 공용연수 31년된 개단면세로리브형식의 강바닥판 교량의 피로균열 발생 원인을 조사하기 위하여 실교통류하에서의 계측 데이터를 통하여 대상구조상세의 거동 특성을 분석하였다. 또한 상세구조해석을 통하여 대상교량을 통과하는 대표트럭하중을 추정하고, 상세영향면해석을 이용하여 대상구조상세의 응력 및 변형특성을 분석하였다. 이들 분석에 기초하여 피로균열이 발생된 대상구조상세의 보강방안을 제시하고, 이에 대한 타당성을 검증하였다. 연구결과, 개단면리브에서의 피로균열의 발생원인은 개단면부에서의 전단변형에 의한 응력증가 및 차량의 이동에 따른 교번응력의 발생에 기인하는 것으로 조사되었으며, 국부구조상세에 대한 피로설계에서는 구조상세의 거동특성이 충분히 반영된 상세해석에 근거한 설계를 실시하는 것이 중요하다는 것을 알 수 있었다.

농촌지역 주민의 심혈관 질환 위험요인 평가 (An Evaluation Study on the Cardiovascular Risk Factors in a Rural Adult Population)

  • 나백주;박경수;임정수;선병환;남해성;손석준
    • 농촌의학ㆍ지역보건
    • /
    • 제23권2호
    • /
    • pp.193-204
    • /
    • 1998
  • Cardiovascular diseases are the leading cause of death and disability in Korea. Their risk factors can be classified as either modifiable or nonmodifiable and among modifiable factors are high bood pressure, elevated blood cholesterol, obesity and cigarette smoking. The purpose of this study was to evaluate the risk factors for the cardiovascular diseases in a rural community and to get basic data for the development of a community-based rick reduction intervention program. Evaluation involved population-based, cross-sectional samples of adult residents in a rurual community. We measured blood pressure, body fat percent by bioelectric impedance fatness analyzer and serum cholesterol and interviewed adult residents over 20-year-old age. Blood pressure was checked twice and hypertension was classified by the sixth report of the Joint National Committee on Detection. Evaluation, and Treatment of High Blood Pressure. The Cutpoints for high blood cholesterol was used National Cholesterol Treatment Guidelines and those for obesity was 25% in male. 30% in female. The results were as follows: 1. Prevalence of definitive hypertension was 59.7% in males and 54.4% in female. 2. Prevalence of hypercholesterolemia was 14.3% in male and 18.2% in female. 3. Prevalence of obese was 10.7% in male and 41.1% in female. 4. Among definitive hypertension, hypercholesterolemia, and obesity 52.1% possessed one risk factor, 12.6% two risk factors and 2.5% three risk factors in males. In females 41.4% possessed one risk factor and 27.6%. 5.7% respectively. 5. The smoking rate was 65.8% in males and 5.2% in females. Our results are used effectively for the community-based intervention towards cardiovascukr diseases risk reduction. However, because of limitations in our study design, further datas are needed including other risk factors and in-person clinical datas.

  • PDF

초고성능 콘크리트를 적용한 경량 프리캐스트 패널의 휨 거동 평가 (Evaluation of Flexural Behavior of Lightweight Precast Panel with Ultra High Performance Concrete)

  • 김경철;고경택;안기홍;손민수;김병석
    • 한국건설순환자원학회논문집
    • /
    • 제8권3호
    • /
    • pp.269-275
    • /
    • 2020
  • 본 연구에서는 초고성능 콘크리트를 적용한 경량 프리캐스트 패널 개발의 일환으로 단면 두께와 철근 배근 유무에 따른 패널의 휨 재하 실험을 수행하였다. 일반 콘크리트 패널 1개와 초고성능 콘크리트를 사용한 경량 프리캐스트 패널 3개로서 총 4개의 패널을 제작하였다. 초고성능 콘크리트를 사용하고 철근을 보강하지 않은 패널은 단면 크기와 상관없이 일반 콘크리트 패널에 비해 휨 성능이 저하되는 것으로 나타났다. 초고성능 콘크리트를 적용한 속빈 단면에 콘크리트 양을 감소시킨 패널은 일반 콘크리트 패널에 비해 휨 성능이 150% 향상되었다. 이는 초고성능 콘크리트를 사용한 프리캐스트 패널의 단면 최적화 설계를 통해 더욱 경량화가 가능할 것으로 판단된다. 초고성능 콘크리트를 사용한 경량 프리캐스트 패널을 실제 구조물에 적용하기 위해서는 전단 성능과 연결 상세에 대한 추가 검토가 필요할 것으로 판단된다.

고체로켓 케이스 내압파열 고장모드의 신뢰도예측 (Reliability Prediction of Failure Modes due to Pressure in Solid Rocket Case)

  • 김동성;유민영;김희성;최주호
    • 한국전산구조공학회논문집
    • /
    • 제27권6호
    • /
    • pp.635-642
    • /
    • 2014
  • 본 연구에서는 고체로켓의 임무 수행 중 연소실 내압으로 인해 발생하는 고체로켓 케이스의 3가지 고장(응력파괴, 균열파괴, 볼트 체결 부 파손) 확률을 효과적으로 예측하는 기법을 개발하였다. 전체적인 확률계산 과정은 다음과 같다: 1) 고체로켓 모터의 고장모드에 영향을 주는 설계 변수선정 및 확률분포 부여, 2) 연소해석을 통한 로켓의 최대작동압력(maximum expected operating pressure, MEOP)의 확률분포 계산, 3) 케이스의 응력과 변형 형상을 구하기 위한 유한요소해석, 4) 3가지 고장함수에 대한 신뢰도예측의 수행, 계산의 편의를 위해 유한요소모델은 축대칭으로 가정하였고 볼트 체결 부의 접촉을 고려하였다. 효율적인 신뢰도예측을 위해 FORM(first-order reliability method) 기법을 통해 MPP(most probable failure point)를 탐색한 후, LHS(latin hypercube sampling)와 반응표면기법을 적용하여 고장모드를 다항식으로 근사화하며, 중요도 추출법을 적용하여 고장확률을 계산하였다.

후방 안정형 인공 관절 전치환술 후 슬개골 덜컹 증후군의 초음파적 진단 - 증례 보고 - (Ultrasonographic Diagnosis of the Patellar Clunk Syndrome after Posterior Stabilized Total Knee Arthroplasty - A Case Report -)

  • 유재두;김남기;정재윤
    • 대한정형외과 초음파학회지
    • /
    • 제7권1호
    • /
    • pp.39-44
    • /
    • 2014
  • 슬개골 덜컹 증후군은 인공 관절 전치환술 후 슬개골 버튼 근위부에 섬유성 결절이 형성되어 통증, 염발음, 잠김 현상등의 증상이 발생하는 슬개 대퇴 합병증이다. 주로 후방 안정형 삽입물을 사용한 후에 발생하며, 굴곡시 섬유성 결절이 과간 절흔에 포착되었다가 신전시 이탈하면서 증상을 유발한다. 대퇴 삽입물의 구조적 특징이 가장 큰 원인으로 추정되고 초기의 후방 안정형 삽입물에서 발생 빈도가 높았다. 이후 새로운 형태의 삽입물에서는 구조가 개선되어 발생 빈도가 감소하였으나 최근까지도 슬개골 덜컹 증후군의 발생이 보고되고 있다. 진단은 주로 증상에 의해 이루어지며, 영상의학적 검사도 진단에 도움이 된다. 특히, 초음파 검사는 대퇴 사두건의 섬유성 결절을 쉽고 간편하게 발견할 수 있다. 저자들은 초음파를 이용하여 진단된 슬개골 덜컹 증후군 1례를 경험하여 보고하고자 한다.

  • PDF