• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.1
• /
• pp.77-82
• /
• 2015

Recently, multi-user massive MIMO (MU-Massive MIMO) network has attracted a lot of attention as a technology to accommodate explosively increasing mobile data traffic. However, the MU-Massive MIMO network causes a tremendous hardware complexity in a base station and computational complexity to select optimal set of users. In this paper, we thus propose a simple algorithm for selecting antennas and users while reducing the hardware and computational complexities simultaneously. The proposed scheme has a computational complexity of $O((N-S_a+1){\times}min(S_a,K))$, which is significantly reduced compared to the complexity of optimal scheme based on Brute-Force searching, $$O\left({_N}C_S_a\sum_{i=1}^{min(S_a,K)}_KC_i\right)$$, where N, $S_a$, and K denote the number of total transmit antennas, the number of selected antennas, and the number of all users, respectively.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.1
• /
• pp.17-22
• /
• 2011

As the quality of a weld joint is strongly influenced by process parameters the welding process, an intelligent algorithms that can predict the bead geometry and shape to accomplish the desired mechanical properties of the weldment should be developed. In this study, prepared by ${\Phi}1.6mm$ GMA welding of metal wire nose Advice jowelui 350A 600A grade level inverter welder and DAIHEN SCR's were carried out using welding. Welding conditions were 5.5m/min wire feed rate the welding current is rapidly transmit approximately 260A, welding voltage was about 30V. CTWD a 22mm, shielding gas was Ar 20L/min and the welding speed was a 240mm/min. Using data collected during welding equipment welding current and welding voltage waveform was analyzed by measuring the volume of the transition mode. Addition of $CaCO_3$ as a loss of the spread of the weld bead dilution rate decreased, suggesting that, GMA in the overlay welding bead shape control, dilution control and may be used as a welding flux is considered. Stabilizing effect of the arc by the Ca-containing $CaF_2$, $CaCO_3$, $CaMg(CO_3)_2$, respectively, welding flux 0.1wt.% added GMA welding and weld overlay were evaluated with dilution, $CaF_2$, and $CaMg(CO_3)_2$ added to the dilution of Seemed to increase.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.5
• /
• pp.55-62
• /
• 2019

In this paper, we consider K-user multiple-input multiple-output (MIMO) interference channel and present a transceiver design for simultaneous wireless information and power transfer (SWIPT) systems. In addition, we consider a SWIPT system where an information decoding receiver and an energy harvesting receiver are co-located at the same receiver. In the proposed scheme, signal-to-leakage plus noise ratio (SLNR) is used as a cost function and a transceiver is designed to satisfy the threshold of the harvested energy. More specifically, transmitter precoding vector, receiver filter vector, and power spitting factor are simultaneously designed to maximize SLNR with a constraint on the harvested energy. Through computer simulation, we compare the signal-to-interference plus noise ratio (SINR) performance of the proposed and conventional schemes. When a special condition among the number of transmit antennas, receive antennas, and users is satisfied, the proposed scheme showed better SINR performance than the conventional scheme at low signal-to-noise ratio (SNR) range. Also, when the condition is not satisfied, the proposed scheme showed better performance than the conventional scheme at all SNR range.

• Journal of Broadcast Engineering
• /
• v.16 no.2
• /
• pp.216-225
• /
• 2011

Following the proliferation of three-dimensional video contents and displays, many terrestrial broadcasting companies have been preparing for stereoscopic 3DTV service. In terrestrial stereoscopic broadcast, it is a difficult task to code and transmit two video sequences while sustaining as high quality as 2DTV broadcast due to the limited bandwidth defined by the existing digital TV standards such as ATSC. Thus, a terrestrial 3DTV broadcasting with a heterogeneous video codec system, where the left image and right images are based on MPEG-2 and H.264/AVC, respectively, is considered in order to achieve both high quality broadcasting service and compatibility for the existing 2DTV viewers. Without significant change in the current terrestrial broadcasting systems, we propose a joint rate control scheme for stereoscopic 3DTV service based on the heterogeneous dual codec systems. The proposed joint rate control scheme applies to the MPEG-2 encoder a quadratic rate-quantization model which is adopted in the H.264/AVC. Then the controller is designed for the sum of the left and right bitstreams to meet the bandwidth requirement of broadcasting standards while the sum of image distortions is minimized by adjusting quantization parameter obtained from the proposed optimization scheme. Besides, we consider a condition on maintaining quality difference between the left and right images around a desired level in the optimization in order to mitigate negative effects on human visual system. Experimental results demonstrate that the proposed bit rate control scheme outperforms the rate control method where each video coding standard uses its own bit rate control algorithm independently in terms of the increase in PSNR by 2.02%, the decrease in the average absolute quality difference by 77.6% and the reduction in the variance of the quality difference by 74.38%.

• Journal of Satellite, Information and Communications
• /
• v.3 no.1
• /
• pp.41-47
• /
• 2008

Line-of-sight communications cannot easily support korean armed forces because of mountainous terrain. ADD(Agency for Defense Development) introduced ANASIS(Army Navy Air-force Satellite Information System) to meet the Korean warfighter's operational needs. Currently, army's military satcom terminal is designed for either fixed site or on-the-pause operation. The US army is under development of multi-band integrated on-the-move satellite terminals to let the army's communication capability to keep pace with globally deployable Joint Task Force for network-centric application. In this paper we analyzed X-band and Ka-band link and subsystem requirement. Our focus here is to describe key technical issues. Especially, On the basis of 3dB beam width of 0.9m antenna, Tracking accuracy and disturbances compensation signal processing on-the-move of Antenna Tracking system is analyzed. Also, protocol is analyzed that minimize blockage on the move due to an obstacle. when the received signal blocked, it stop to transmit burst signal and retransmit when blockage removed through received synchronization signal monitoring. Analyzed specification will be used to make prototype terminal to analyze risk for mass production

• (The)Study of the Eastern Classic
• /
• no.67
• /
• pp.203-236
• /
• 2017

The objective of this study is to suggest the transmission direction and tasks of Ssireum, and the conclusions are like below. First, Ssireum has been designated as a national intangible cultural heritage(No.131) in December 2016. Second, in the current status of preservation and spread of Ssireum, there is no system related to the transmission of Ssireum such as cultivation of professional manpower, and facilities, programs, and administration/finance for transmitting Ssireum. Third, based on the "Intangible Cultural Heritage Preservation & Promotion Act", the transmission direction of Ssireum was suggested. (1)The designation of a college to transmit Ssireum would be needed. (2)The Ssireum curriculum should be established. (3) It would be necessary to secure trainees for transmitting Ssireum. (4)The production of teaching materials for transmitting Ssireum would be needed. (5)It would be needed to secure training institutes designated in each region and also teaching personnels for transmitting Ssireum. (6)The research direction for the correct transmission of Ssireum should be set up. Fourth, based on the "Ssireum Promotion Act", the transmission direction of Ssireum was suggested. (1)It is urgent to complement provisions for transmitting Ssireum. (2)For the transmission of Ssireum, instead of the transmission direction of Ssireum as a national intangible cultural heritage in the standardized perspective, it would be necessary to seek for the joint transmission direction between South & North Korea for research & documentation of Ssireum that could be systematized/shared between South & North Korea, development/spread of contents for discovering the original form of Ssireum, and the establishment of a base of transmission system for the preservation/promotion of Ssireum through the academic/institutional exchanges regarding Ssireum between South and North Korea. Moreover, the overall and fundamental transmission measures for the education, transmission, research, record, and informatization of Ssireum, and the cultivation of professional manpower should be established. Fifth, the contents of institutional tasks for Ssireum are like following. (1)The institutional complementation of the "Ssireum Promotion Act" should be done for the domestic/foreign promotion of Ssireum. (2)For the integration of Ssireum organizations, the administrative system should be unified. (3)The standard technical system manual for Ssireum should be produced. (4)The 'Ssireum Transmission Center' should be built for the preservation and systematic transmission of Ssireum. (5)The selection of a college for transmitting Ssireum and the establishment of a system to cultivate Ssireum successors should be done. (6)It would be necessary to establish database(DB) for the use of Ssireum techniques essential for the transmission of Ssireum.