무연솔더에 Fe 입자를 첨가하여 Cu3Sn 금속간화합물 성장을 억제하고 취성파괴를 방지하는 연구는 보고된 바 있으나 이러한 복합솔더를 TLP(transient liquid phase) 본딩에 적용한 경우는 아직 없다. 본 연구에서는 Sn계 무연솔더 내부에 Fe 입자의 함량을 적절히 조절하여 Sn-3.5Ag-15.0Fe 복합솔더를 제작하고 TLP 본딩에 적용하여 접합부 전체를 Sn-Fe 금속간화합물로 변화시킴으로써 고온 솔더로서의 적용 가능성을 탐색하였다. 접합공정 중에 형성되는 FeSn2 금속간화합물은 513℃의 고융점을 가지므로 사용 중 온도가 280℃까지 상승하는 전력반도체용 파워모듈에 안정적으로 적용이 가능하다. 칩과 기판에 ENIG(electroless nickel-immersion gold) 표면처리를 적용한 결과 접합부에 Ni3Sn4/FeSn2/Ni3Sn4의 다층 금속간화합물 구조를 형성하였으며 전단시험시 파괴경로는 Ni3Sn4/FeSn2 계면에서 균열이 진전하다가 FeSn2 내부로 전파되는 양상을 보였다. TLP 접합공정 2시간 이후에는 30 MPa 이상의 전단강도를 얻었고 특히 200℃ 전단시험에서도 강도 저하가 전혀 없었다. 본 연구결과는 최근 활발히 연구되고 있는 전기자동차용 파워모듈에 적용할 수 있는 소재 및 공정으로 기대할 수 있다.
소재와 부품은 제조업의 허리 역할을 담당한다. 2018년 우리나라의 소재부품산업의 수출액은 3,162억 달러로 2018년 기준 전체 수출의 52.3%를 차지할 정도로 급성장해 효자산업이 되었다. 이처럼 소재부품산업은 무역흑자를 이끄는 핵심산업이지만 유독 일본과의 관계를 보면 다른 모습을 보인다. 작년 대일무역적자는 240억 달러로 줄었으나 그중 소재부품산업의 적자는 151억 달러로 여전히 60%를 넘는 수준이다. 오늘날 일본이 첨단 소재부품산업에서 최고의 경쟁력을 가지게 된 것은 요인으로는 기업 간의 협력과 공생, 모노쯔쿠리 정신, 장기적인 정부정책 등에서 찾을 수 있다. 우리 경제가 일본의 첨단소재부품산업을 추격하기 위해서는 다음과 같은 인식전환이 필요할 것이다. 첫째, 소재부품산업은 동반성장을 전제로 하며 상생협력이 절대적으로 필요한 동반성장산업의 하나라고 할 수 있다. 일반적으로 소재와 부품은 최종제품이 아니라 중간제품이다. 따라서 소재와 부품은 소비자와 거래가 이루어지는 것이 아니라 기업 간의 거래만 이루어지는 특성을 잘 이해해야 한다. 둘째, 공동기술개발의 확대가 절대적으로 필요하다. 우리나라는 범용 소재부품산업분야에서는 경쟁력을 가진 기술강국이다. 그러나 자세히 살펴보면 중소기업의 기술개발 단계에서 대기업의 참여가 부진해 첨단제품의 개발이 상대적으로 어려운 구조를 가진 것으로 조사되고 있다. 우리나라 소재부품산업은 기술개발단계에서부터 대기업이 참여하여 고객의 다양한 의견을 전달하고 공동 R&D에 참여해야 할 것이다. 셋째, 장기적인 접근이 필요하다. 소재부품산업에서 대일 무역적자의 고착화는 첨단 기술 부족 등 우리나라 소재부품산업의 구조적 취약성이 직접적인 원인이지만 그 배경에는 기술에 대한 문화적 차이가 존재하기 때문이다. 우리가 첨단소재부품산업 분야에서도 경쟁력을 확보하기 위해서는 시간이 걸리더라도 기술과 노하우를 하나씩 쌓아가는 장기적인 접근이 절대적으로 필요하다. 여기에는 기업의 접근뿐만 아니라 정부의 정책도 마찬가지일 것이다.
Xian, Estevez-Ventosa;Uxia, Castro-Filgueira;Manuel A., Gonzalez-Fernandez;Fernando, Garcia-Bastante;Diego, Mas-Ivars;Leandro R., Alejano
Geomechanics and Engineering
/
제31권5호
/
pp.461-476
/
2022
Research studies on the scale effect on triaxial strength of intact rocks are scarce, being more common those in uniaxial strength. In this paper, the authors present and briefly interpret the peak and residual strength trends on a series of triaxial tests on different size specimens (30 mm to 84 mm diameter) of an intact granitic rock at confinements ranging from 0 to 15 MPa. Peak strength tends to grow from smaller to standard-size samples (54 mm) and then diminishes for larger values at low confinement. However, a slight change in strength is observed at higher confinements. Residual strength is observed to be much less size-dependent. Additionally, this study introduces preliminary modelling approaches of these laboratory observations with the help of three-dimensional particle flow code (PFC3D) simulations based on bonded particle models (BPM). Based on previous studies, two modelling approaches have been followed. In the first one, the maximum and minimum particle diameter (Dmax and Dmin) are kept constant irrespective of the sample size, whereas in the second one, the resolution (number of particles within the sample or ϕv) was kept constant. Neither of these approaches properly represent the observations in actual laboratory tests, even if both of them show some interesting capabilities reported in this document. Eventually, some suggestions are provided to proceed towards improving modelling approaches to represent observed scale effects.
벤처기업은 경쟁력 강화를 위한 내부 역량 구축에는 자원과 인력이 부족하기 때문에 공동연구, 네트워킹 등 외부와의 협력이 중요한 역할을 하고 있다. 이에 본 논문에서는 벤처기업의 산학협력 경험이 조직학습역량과 혁신성과에 미치는 영향에 대하여 살펴보고자 하였다. 지속적으로 확대되고 있는 정부 R&D 투자가 벤처기업과 대학의 협력을 촉진함으로써 조직학습역량을 강화하고 혁신성과를 창출하는 메커니즘을 실증 분석하였으며 연구결과는 다음과 같다. 첫째, 벤처기업의 산학협력 경험은 조직학습역량을 강화시키는 것으로 나타났다. 벤처기업은 대학과의 협력 및 자원 활용을 통해 내부 역량 강화에 중요한 역할을 하고 있음을 실증분석 한 것이다. 둘째, 벤처기업의 조직학습역량은 혁신성과에 유의한 영향을 미쳤다. 조직학습역량이 높은 조직은 새로운 아이디어를 발굴하고 공유하는 문화를 가지게 됨으로써 기업의 혁신성과 창출에도 긍정적인 역할을 하는 것으로 나타났다. 마지막으로 벤처기업 창업자의 배태조직(incubator organization)에 따른 산학협력과 조직학습역량을 분석한 결과 중소(벤처)기업 및 개인 경험 기반의 창업 그룹이 대학과의 협력을 통해 조직학습역량과 혁신성과 창출에 긍정적인 영향을 미치는 것으로 나타났다. 중소(벤처)기업과 개인기반의 창업자는 대기업, 대학 및 연구소 창업자에 비해 상대적으로 더 높은 기술역량을 보유한 대학과 협력함으로써 기업의 조직학습역량 강화에 도움을 받은 것으로 볼 수 있다. 본 연구를 통해 정부는 벤처기업의 R&D 성과를 극대화하기 위해 대학과 협력 유도하는 정책이 필요할 것이다. 물론 벤처기업과 대학에 나눠주기식 지원이 혁신성과를 저해하고 있다는 비판도 존재하지만 정부 투자는 기술 축적, 고급인력 양성, 혁신 네트워크 강화 등 무형자원 확충에 중요한 역할을 한다. 그렇기에 정부는 벤처기업의 성장을 위한 투자 전략성 강화를 위해 정부의 권한을 적절하게 활용해야 할 것이다.
The purpose of the study is to give basic data for the improvement of the skill and to show an exemplary position for squash club members or trainers thru a comparative analysis on the kinematics and kinetics variables on the forehand drive motion in playing squash. The objects of the research are divided into two sections, skilled group(n=8) and unskilled group(n=8). The skilled group is composed of professional players currently working and unskilled group is career of six month, both of lives in B city. In this research, to gather the data 3D motion analysis and test result analysis using force platform was used. The variables are duration, position, segment velocity, segment acceleration and etc. in using force platform. The results are as follows: 1. The duration per phase of the skilled is 0.18sec P1(DS) while that of unskilled is 0.32sec. in P2(FT), the duration of the skilled is 0.29sec, that of unskilled is 0.34sec. Average of the duration of the skilled is 0.48sec, while the unskilled, 0.66sec. 2. Regarding positional movements per event, the unskilled has a relatively higher position in center of gravity, shoulder joint, elbow joint compared with that of the skilled. Generally speaking, positions of the unskilled is higher than the skilled. 3. In segment velocity per event, R-shank, R-upper arm, R-forearm and racket. The skilled is faster than the unskilled. we found a big dig difference in shank. 4. In acceleration per event, there was a big difference in upper-arm and fore-arm of the impact. 5. The skilled group on the force platform shows relatively stable and regular changes while the unskilled shows unstable from the touch down to initial 20% the force value of central support period after the impact moment decreases rapidly and the center of gravity is not moved well. 6. The maximum force value of the skilled is 1019.7N. it is found 19.86% of the total duration. That of the unskilled is 639.2N, it is found 20.67% of total duration.
This study was conducted to identify the relationships among self-care agency, family support, qualify of life in patients with rheumatoid arthritis. The subjects were 120 rheumatoid arthritis patients who attended RA O.P.D. at a university hospital, located in Daegu city, from 10th of May in 1998 to 30th of July in 1998. Three structure questionnaires were administered for explore three main research variables; 소향숙's self-care agency scale, 강현숙's family support scale, and 김종임's quality of life scale of RA patien. Data analysis was conducted with SPSS program including percentage, mean, standard deviation, mean score, Pearson Correlation Coefficient, multiple regression, and Cronbach's Alpha. Results are summarized as follows; 1. The mean of RA patient's self-care agency was 136.62, the mean of family support 37.38, and the mean of qualify of life 134.41. 2. Subject's self-care agency was positively correlated with family support(r=.2446) and with quality of life(r=.4341). Subject's family support was positively correlated with quality of life(r=.2630). 3. Stepwise multiple regression was used to determine the predictors of subject's quality of life. Significant predictors for subject's quality of life were self-care agency(t=4.873 p=0.0000), family support(t=4.480 p=0.0000) and the severity of arthralgia(t=-3.838, p=0.0002). The number of joints involved and the periods of illness did not show significant contribution to subject's quality of life. Self-care agency, family support, and family support explained 40. 39% of the variance in RA patient's quality of life. Given this results, it is suggested that a repeated study to measure RA patient's self-care practice in their own life may be needed to develope and validate an optimum level of nursing intervention for RA patient with which family support will be encouraged and patient's self-care agency will be facilitated.
기술경쟁과 생산경쟁에 범위(範圍)의 경제(經濟)가 존재하고, 두 기업이 생산경쟁에서 전략적(戰略的) 대체관계(代替關係)에 있는 경우 경쟁기업간의 기술경쟁(技術競爭)은 적극적인 양상을 띠게 된다. 생산단계의 경쟁자를 견제하기 위환 전략적 대응으로 기술경쟁단계(技術競爭段階)에서 과잉된 기술투자(技術投資)와 기술이전(技術移轉)이 유발되는 것이다. 또한 과잉된 기술경쟁은 제품가격(製品價格)의 급속한 하락(下落)으로 연결된다. 이와 같은 맥락에서 최근 보도 된 바 있는 국산화 신제품에 대한 외국기업의 저가공세(低價攻勢)는 과점적(寡占的) 시장(市場)에서 나타나는 자연스런 현상으로 이해할 수 있다. 또한 기술경쟁단계에서 기술개발투자(技術開發投資)와 기술이전(技術移轉)은 전략적(戰略的) 대체관계(代替關係)뿐만 아니라 전략적(戰略的) 보완관계(補完關係)를 가질 수 있다. 이와 같이 대조적인 전략적 대응관계가 가능하기 때문에 국산화(國産化) 노력(努力)을 견제하고 국내시장(國內市場) 점유율(占有率)을 유지하기 위해 저가공세를 취하는 외국기업에 대한 대응방안(對應方案)으로 검토되고 있는 수입품에 대한 조정관세(調整關稅), 국산화 신제품에 대한 수요창출(需要創出), 기술투자의 채산성 보장을 위한 보조금지급(補助金支給) 등과 같은 정책변수(政策變數) 활용(活用)이 바람직한가를 사전적으로 규정하기는 어렵다. 즉 전략적 무역(산업)정책이론에서 주장하는 것처럼 관세부과(關稅賦課)나 보조금지급(補助金支給)이 국내기업의 시장점유율(市場占有率)과 기술투자규모(技術投資規模)를 향상 증대시키는 것은 아니라는 것이다.
본 연구에서는 그래핀 산화(graphene oxide, GO) 분말 첨가가 ball grid array(BGA) 패키지와 printed circuit board(PCB)간 Sn-3.0Ag-0.5Cu(SAC305) 무연솔더 접합부의 electromigration(EM) 수명에 미치는 영향에 대하여 보고 하였다. 솔더 접합 직후, Ni/Au표면처리된 패키지 접합계면에서는 $(Cu,Ni)_6Sn_5$가 생성되었으며 organic solderability preservative(OSP) 표면처리 된 PCB 접합계면에서는 $Cu_6Sn_5$ 금속간화합물(intermetallic compound, IMC)이 생성되었다. $130^{\circ}C$, $1.0{\times}10^3A/cm^2$ 전류밀도 하에서 EM 수명평가 결과, GO를 첨가하지 않은 솔더 접합부의 평균 파괴 시간은 189.9 hrs으로 도출되었고, GO를 첨가한 솔더 접합부의 평균 파괴 시간은 367.1 hrs으로 도출되었다. EM에 의한 손상은 패키지 접합계면에 비하여 pad 직경이 작은 PCB 접합계면에서 전자 유입에 의한 Cu의 소모로 인하여 발생하였다. 한편, 첨가된 GO는 하부계면의 $Cu_6Sn_5$ IMC와 솔더 사이에 분포하는 것을 확인하였다. 따라서, SAC305 무연솔더에 첨가된 GO가 전류 집중 영역에서 Cu의 빠른 확산을 억제하여 우수한 EM 신뢰성을 갖는 것으로 생각된다.
Based on the data obtained under the China-Korea joint project (1997-2001) and historic observations, the distribution, transportation and sedimentation of sediment in the southern Yellow Sea (SYS) are discussed, and the controversial formation mechanism of muddy sediments is also explored. The sediment transport trend analysis indicates that the net transport direction of sediment in the central SYS (a fine-grained sediment deposited area) points to $123.4^{\circ}E,\;35.1^{\circ}N$, which is a possible sedimentation center in the central SYS. The sediment transport pattern is verified by the distribution of total suspended matter (TSM) concentration and ${\delta}^{13}C$ values of particulate organic carbon (POC), the latter indicates that the bottom water plays a more important role than the surface water in transporting the terrigenous material to the central deep-water area of the SYS, and the Yellow Sea circulation is an important control factor for the sediment transport pattern in the SYS. The carbon isotope signals of organic matter in sediments indicate that the Shandong subaqueous delta has high sedimentation rate and the deposited sediments originate mainly from the modern Yellow River. The terrigenous sediments in deep-water area of the SYS originate mainly from the old Yellow River and the modern Yellow River, and only a small portion originates from the modern Yangtze River. The analytical results of TSM and stable carbon isotopes are further confirmed by another independent tracer of sediment source, polycyclic aromatic hydrocarbons (PAHs). Five light mineral provinces in the SYS can be identified and they indicate inhomogeneity in sources and sedimentary environment. The modern shelf sedimentary processes in the SYS are controlled by shelf dynamic factors. The muddy depositional systems are produced in the shelf low-energy environments, which are controlled by some meso-scale cyclonic eddies (cold eddies) in the central SYS and the area southwest of the Cheju Island. On the contrary, an anticyclonic muddy depositional system (warm eddy sediment) appears in the southeast of the SYS (the area northwest of the Cheju Island). In this study, we give the cyclonic and anticyclonic eddy sedimentation patterns.
본 논문에서는 FACS(Facial Action Coding System)에 기반을 둔 안드로이드 로봇 헤드의 개발을 통한 감정표현 방법을 제안한다. 안드로이드 로봇은 인간과 가까운 외모를 가진 로봇을 말하며, 인공 피부, 인공 근육을 가지고 있다. 감정 표현을 로봇으로 구현하기 위해서는 인공 근육의 개수와 배치를 정하여야 하는데 이를 위해 인간의 얼굴 움직임을 해부학적으로 분석하였다. FACS는 해부학을 기반으로 하여 표정을 만들 때의 얼굴의 움직임을 분석한 시스템이다. FACS에서는 표정은 AU(Action Unit)의 조합으로 만들어지며, 이 AU를 기반으로 로봇의 인공 근육의 수와 위치를 정하게 된다. 개발된 안드로이드 헤드는 30개의 인공 근육에 해당되는 모터와 와이어를 가지고 있으며, 표정 구현을 위한 인공 피부를 가지고 있다. 제한된 머리 공간에 많은 모터를 탑재하기 위해 spherical joint와 스프링을 이용하여 초소형 안구 모듈이 개발되었고, 와이어 경로의 효율적인 설계를 기반으로 30개의 모터가 배치되었다. 제작된 안드로이드 헤드는 30 자유도를 가지고 13개의 기본 감정 표현을 구현 가능하였고, 전시회에서 일반 관람객들을 대상으로 인식률을 평가 받았다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.