• 한국자동차공학회논문집
• /
• 제20권5호
• /
• pp.53-64
• /
• 2012

Deep and narrow welds can be produced by laser welding at high welding speeds with a narrow heat-affected zone (HAZ) and little distortion of the workpiece. This study aims to evaluate the usefulness of laser welding at automobile component manufacture. Microstructure observation, hardness test, tensile test and fatigue life test are performed by using the fiber laser welded SPFC590 steel sheets which is used widely in the manufacture of automotive seat frame. Three kinds of specimens are only a SPFC590 steel plate, quasi-butt joint plate and lap joint plate by laser welding. The following results that will be helpful to understand the static strength, fatigue crack initiation and growth mechanism were obtained. (1) The tensile strength of quasi butt joint specimens nearly equal to base metal specimens, but lap joint specimens fractured in shear area of weld metal. (2) The fatigue strength of quasi-butt joint specimen was approximately 8 percent lower than that of the base metal specimens. Furthermore, the lap joint specimens were less than 86 percent of the base metal specimens. (3) The lap joint fatigue specimens fractured at shear area in high level stress amplitude, while fractured at normal area in low level stress amplitude. From these results, the applicability of the laser welding to the automobile component is discussed.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2007년도 학술대회
• /
• pp.247-250
• /
• 2007

There are three main kinds of service standards for 3G(Third-Generation) wireless communication as WCDMA, CDMA2000 and TD-SCDMA(Time Division-Synchronous Code Division Multiple Access). Compare with WCDMA and CDMA2000, TD-SCDMA system has distinguished technical characters. It is a TDD(Time Division Duplexing) based technology and deploys several advanced but in some respects complex technologies such as smart antenna, joint-detection and baton-handoff, etc. Therefore to analyze and design TD-SCDMA wireless network, it needs more efficient and systematic simulation tool. General simulation tool has so many analysis functions including path loss prediction, capacity and coverage analysis. For more suitable for TD-SCDMA, new additional technologies have to be implemented in simulation tool. Especially as the wireless network highly advancing focused on data service, it more needs to research and develop on the reliability of the simulation tool. In this paper, to give the concrete process and skill about how to implement TD-SCDMA simulation tool, we define the kinds of simulation tool and list basic analysis functions available for TD-SCDMA network design at first. And then we explain how to consider the effects of new technologies of TD-SCDMA and give the solutions about theses considerations.

• 한국전자거래학회지
• /
• 제25권1호
• /
• pp.203-214
• /
• 2020

최근 들어 기술개발 현황, 신규기술 분야 출현, 기술융합과 학제 공동연구, 기술의 트렌드 변화 등을 파악하기 위해 R&D 과제정보, 특허와 같은 기술문서의 분류정보가 많이 활용되고 있다. 이러한 기술문서를 분류하기 위해 주로 텍스트마이닝 기법들이 활용되어 왔다. 그러나 기존 텍스트마이닝 방법들로 기술문서를 분류하기 위해서는 기술문서들을 대표하는 특징들을 직접 추출해야 하는 한계점이 있다. 따라서 본 연구에서는 딥러닝 기반의 BERT모델을 활용하여 기술문서들로부터 자동적으로 문서 특징들을 추출한 후, 이를 문서 분류에 직접 활용하는 모델을 제안하고, 이에 대한 성능을 검증하고자 한다. 이를 위해 텍스트 기반의 국가 R&D 과제 정보를 활용하여 BERT 기반 국가 R&D 과제의 중분류코드 예측 모델을 생성하고 이에 대한 성능을 평가한다.

• 디지털산업정보학회논문지
• /
• 제17권4호
• /
• pp.177-195
• /
• 2021

The purpose of this study is to examine the trouble of recruitment and research and development of ICT SMEs. Recently, many ICT SMEs have emerged for selling products and services using the technology of the 4th industrial revolution. However, SMEs have relatively deficient resources compared to large companies, the difficulty of maintenance or growth of human resources and intangible resources. This research methodology organized the four stages of the analysis process. The first analysis is the association rules for human resource recruitment. The second analysis is the difficulty of hiring jobs and experienced workers by each stage of company growth. The third analysis is a regression analysis of the trouble of R&D activity. The last analysis is an analysis of association rules on the difficulties of management activities by company growth. As the research result, the first analysis has shown a difference in favored human resources by the ICT industry. The second analysis also showed factor differences in job recruitment difficulties for each stage of corporate growth. In the third analysis, the operation of research institutes in ICT SMEs is influenced by industry type, corporate certification, corporate growth stage, self-technology development, joint technology development, technology transfer, and commercialization. As the last analysis, ICT SMEs showed factor differences in difficulties in management activities by stage of corporate growth. This study contributed empirically emphasizing the troubling phenomenon of human resources and R&D necessary for the growth of ICT SMEs. As a theoretical implication, this research contributed to the research-area expansion of management information using big-data technologies. In particular, this research practically suggests the differentiated direction of recruitment and R&D by ICT SMEs based on industry and each stage of company growth through the association rules of big data.

• Composites Research
• /
• 제28권4호
• /
• pp.219-225
• /
• 2015

선박 분야에서 이산화탄소($CO_2$) 배출을 줄이고 연료 효율을 높이기 위한 방법의 하나로 항해하는 선박의 공기 저항을 줄이기 위한 에어 스포일러를 장착하는 방안이 검토될 수 있다. 본 연구에서는 대형 선박에 적용될 수 있는 복합재 에어 스포일러의 체결부를 설계하고, 이에 대한 정적, 피로강도를 평가하였다. 하중은 선박의 운항 중 발생하는 청파(Green Water Pressure) 0.1 MPa이 에어 스포일러에 수직하게 가해지는 것으로 가정하였다. 에어 스포일러는 유리섬유 면재에 발사 코어를 갖는 샌드위치 형태로 제작하였고, 여러 개의 샌드위치 패널이 셀(Cell) 형태로 강(Steel) 프레임에 볼트로 체결되는 것으로 가정하였다. 에어 스포일러와 프레임의 체결부는 베어링 파손을 가지도록 설계하고, 정적(베어링) 시험과 피로(4점 굽힘) 시험을 수행하였다. 시험 결과 개발된 에어 스포일러는 정해진 외부하중을 견딜 수 있는 충분한 안전여유를 갖는 것을 확인하였다. 개발된 에어 스포일러는 조만간 대형 상업용 선박에 적용될 예정이다.

• 정보와 통신
• /
• 제12권8호
• /
• pp.53-64
• /
• 1995

이 글에서는 국내의 PCS 표준 방식을 결정하기 위한 판단 기준과 여러 가지 고려 사항을 제시하고 이러한 기준에 의한 평가 결과 upbanded IS-95가 가장 적절한 방식임을 설명하였다. 그리고 CDMA 방식의 신규 셀룰라 사업자인 신세기 통신이 upbanded IS-95 방식의 PCS사업을 하기에 가장 적합한 사업자임을 논하였다. 그 다음 신세기 통신의 PCS 연구개발 추진 방안과 전략을 설명하였다. PCS 시스템 개발을 위해 국내제조업체와 추진하고 있는 공동개발에 관련한 사항을 기술하였다. 그리고 향후의 연구개발 추진 계획을 주요 항목별로 설명하였다. 지금까지 신세기통신이 추진해왔던 연구개발의 내용과 성과를 설명하고 그 중에서 PCS 망구성과 향후 제공하게 될 음성서비스, 부가서비스 및 무선 데이터서비스에 대한 사항을 설명하였다.

• 한국레이저가공학회지
• /
• 제13권3호
• /
• pp.19-26
• /
• 2010

In this study, fundamental experiment was conducted with various strength of UHSS (Ultra High Strength Steel) by $CO_2$ laser. And then, butt and lap joint laser welding with boron alloyed steel and Al-Si coated boron alloy steel have been done by changing laser beam feature, existence of gap and existence of coating layer to know welding characteristics of those materials. As a result, in case of fundamental experiment with various strength steel, hardening was found in the weld metal of all tested materials and softening was found at the heat affected zone of SGAFC 1180. In case of laser butt welding of UHSS, mechanical properties was improved by using small laser beam diameter and Al-Si coating layer caused fracture of weld metal. In case of laser lap welding of UHSS, Al-Si coating layer resulted in formation of intermetallic compound at the fusion boundary where fracture occurred. Al-Si coating layer caused lowering mechanical properties of weld metal.

• Corrosion Science and Technology
• /
• 제3권4호
• /
• pp.154-160
• /
• 2004

The Sulfide Stress Corrosion Cracking (SSCC) resistance of structural steels is one of the critical concerns for the operators, material designers, and fabricators of oil-field equipment, especially treating sour gas (H2S) containing fluids. As far as its fabricators concerned, the systematic care of welding parameters should be taken to obtain comparable SSCC resistance of their weldment to that of its base material. In this respect, every different type of welding joint design for this use should be verified to be SSCC-proof with relevant test procedures. In this study, the welding parameters to secure a proper SSCC resistance of steel pipe's weldments were reviewed on the Welding Procedure Qualification Records (WPQR), which had been employed for actual fabrication of an offshore structure for oil and gas production. Based on this review, a guideline of welding parameters, such as, heat input, welding consumable for Y.S. 65 ksi class steel pipe material is proposed in terms of the NACE criteria for SSCC resistance.

• Journal of Welding and Joining
• /
• 제34권4호
• /
• pp.55-61
• /
• 2016

During laser overlap welding of galvanized steel sheets, explosion of weld pool by the high pressure zinc vapor induces weld defects like porosity and blowhole. In this study, laser 2-pass welding was implemented to prevent the weld defects. Through the 1st pass welding, zinc layers on the faying surfaces were removed when proper heat input was applied. Excessive heat input could result in explosion even during the 1st pass welding and insufficient heat input could not remove enough region of zinc layer for the 2nd pass welding. Coating weights of $45g/m^2$ and $60g/m^2$ were considered and for both cases sound welds without weld defects could be achieved. In spite of 2-pass welding, softening of weld and heat affected zone was not observed and Zn coating was not diluted into the weld metal.

• 생명과학회지
• /
• 제28권7호
• /
• pp.795-801
• /
• 2018

본 연구는 제주마 체중 형질과 말의 3번 및 9번 염색체 단일염기변이마커간의 관련성을 분석하기 위해 수행되었다. 본 연구에 사용된 DNA 샘플은 제주특별자치도 축산진흥원에서 등록관리 중인 제주마 320두를 제공받았고, 생체중 자료는 한국마사회에서 시행한 경마에 출주한 제주마의 체중자료를 이용하였다. 기존에 말의 체형관련형질과의관련성이 보고된 바 있는 말의 3번 염색체상에 위치한 BIEC2-808466, BIEC2-808543, BIEC2-808967, BIEC2-809370 단일염기변이마커와 9번 염색체상에 위치한 BIEC2-1105370, BIEC2-1105372, BIEC2-1105377, BIEC2-1105505 and BIEC2-1105840 유전자형을 분석하였다. 관련성 분석을 위한 종속변수는 선형혼합모형을 이용해서 추정한 생체중 육종가를 이용하였다. 관련성 분석결과 6개의 마커(BIEC2-808543, BIEC2-808967, BIEC2-809370, BIEC2-1105370, BIEC2-1105372, and BIEC2-1105377)와 생체중 추정육종가간의 유의성이 인정되었다. 또한, BIEC2-808967과 BIEC2-1105377의 유전자형조합을 구성하여 생체중 추정육종가에 대한 효과를 분석한 결과, 두 마커의 유전자 조합은 생체중 변이에 유의한 효과가 있었다. 본 연구에서 유의성이 인정된 단일염기변이마커들은 제주마의 체중 개량을 위한 선발육종체계의 효율성을 높일 수 있는데 사용될 수 있을 것으로 사료되지만, 이 들 마커효과의 좀더 정확한 추정을 위한 추가의 연구가 필요할 것으로 생각된다.