• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제11권3호
• /
• pp.29-36
• /
• 2007

Let T be an ergodic measure preserving transformation on (X, B, ${\mu}$). It is called 2-simple if every 2-fold ergodic joining is either a product measure or an off-diagonal measure. In general, factors of simple maps are not simple. So far, there has been no characterization of the factor of simple maps. In this paper, we give a joining characterization of factors of simple maps.

• 한국정밀공학회지
• /
• 제9권1호
• /
• pp.66-74
• /
• 1992

The joining processes of aluminum alloy tubes and polyurethane cores by electromagnetic impulsive compression are studied. The influences of various geometrical factors (the length of joined part, the thickness of tube, and the clearance between tube and core) and the process factors(the discharged energy and the number of discharge)are examined experimentally and discussed. And the magnetic pressure in metal/polymer joining is calculated and is compared to the pressure in metal/metal joining. The following results are obtained: (1) The joining strength is dependent upon the residual radial strain of the polyurethane cores. (2) The joining strength increases as discharged energy and the number of discharge increase, but decreases as the clearance, thickness and joining length of tube increases. (3) In the case of metal/polymer joining energy loss is increased and the value of magnetic pressure is less than that in the case of metal/metal joining.

• Journal of Welding and Joining
• /
• 제22권4호
• /
• pp.59-64
• /
• 2004

The purpose of this study is to investigate the influence of weld bead profiles on stress concentration factors of double V groove butt-welded joints. The influence of three parameters such as toe radii, flank angles and bead heights on the stress concentration factors is studied by finite element analysis. It is shown that the three parameters have similar effects on the stress concentration factors. Finally a formula to estimate the stress concentration factors considering the three parameters and others is proposed and estimated results are compared with the results obtained by finite element analysis.

• 한국산학기술학회논문지
• /
• 제10권7호
• /
• pp.1453-1458
• /
• 2009

본 논문은 중공을 가진 판재 두 매를 결합하기 위하여 중공 주위를 따라 기존 레이저 용접법 대신 기계적 프레스 결합법을 적용하는 것에 관한 연구이다. 이를 통해 레이저 용접을 적용했을 때 불가피하게 발생하는 열 변형을 효과적으로 없앨 수 있다. 유한요소해석을 통하여 중공형 판재를 기계적으로 결합시킬 수 있는 금형 설계 방법을 제안하였다. 기계적 결합력을 최대화시키는 데 관련 있는 다섯 가지 설계인자를 선택하여 다꾸치 실험법을 적용한 결과 성형 깊이와 펀치모서리 반경이 가장 크게 영향을 미치는 인자로 나타났다.

• 세라미스트
• /
• 제9권6호
• /
• pp.30-36
• /
• 2006

Joining ceramics to metals has a variety of applications both in the structural and the electronics fields. One of the great benefits of the adoption of joining into the structural applications is to provide reliability to the ceramic components by backing up with metal components. In joining ceramics and metals, two key factors, i.e., establishing chemical bonding at interfaces and dissipation of thermal stress across interfaces, should be paid for attention. Many joining methods have been already established such as adhesive and mechanical joining, brazing and soldering, and solid state bonding. Each has its own benefits with some drawbacks. One can select a suitable process and materials following the requirements of the application. This report focuses on the current status of joining technology for ceramics/metal system.

• Journal of Welding and Joining
• /
• 제34권2호
• /
• pp.30-35
• /
• 2016

Last few decades have seen a rapid increase in the fabrication and characterization of Al alloys for automobiles, heat exchangers and aerospace industries. Aluminium alloys are popular because of their high specific strength, light weight, excellent wear and high oxidation resistance. The development of aluminium alloys in these applications makes their study and research of utmost importance. Brazing is applied to the aluminium alloys for joining various aluminium parts together in most of the industrial applications. Various parameters affect the joining process of these aluminium alloys. In this article, various types of processing parameters have been discussed, and special attention has been given to the category of aluminium brazing alloys. The article reviews on the various parameters that affect the brazing property in various scientific and technological applications.

• Journal of Welding and Joining
• /
• 제16권1호
• /
• pp.17-24
• /
• 1998

본 내용에서는 solid wire(1.2 mm)를 대상으로 보호가스, 용접조건 및 용접재료 등이 용적이행현상에 미치는 영향을 용접 중 아크 신호의 변화와 고속카메라에 의한 용적이행현상 관찰 결과를 중심으로 기술하였다.

• 열처리공학회지
• /
• 제29권2호
• /
• pp.66-74
• /
• 2016

In this study, characteristics of TiAl alloy and SCM440 (Cr-Mo steel) have been investigated with the various joining condition by servo motor type friction welder. The experimental factors of friction welder used in this study are spindle revolution, friction speed, and distance, upset speed and distance, respectively. Servo motor type friction welder could be controlled by the level of oil pressure, and it could be performed by position control dependence of electrical energy. Mechanical properties and morphology of welded interface were characterized by various joining condition. This aroused due to the bond strength dependence on friction heat and size of the heat affected zone. Therefore, it is necessary to have enough friction heat and decreased heat affected zone for good friction welding between dissimilar metals. An optimum bond was obtained between TiAl alloy and SCM440 by controlling friction speed and distance. At the spindle revolution 4,000 rpm, friction speed 120 mm/min, friction distance 15 mm, the bond strength was found to be 312 MPa.

• Journal of Welding and Joining
• /
• 제32권2호
• /
• pp.18-21
• /
• 2014

Cold cracking of weldment is one of the most serious welding problems. A sufficient quantity of diffusible hydrogen, a residual stress, and a sensitive microstructure are the causes of cold cracking. Removal of any one of these factors can be used to prevent cold cracking. Application of flux cored arc welding process is increasing due to high productivity and easiness of welding. In addition, to prevent cold cracking in the HAZ or weldment, preheat temperature and interpass temperature have to be controlled. In this study, the effect of preheat temperature on the levels of diffusible hydrogen in the weld metal deposited using flux cored wire was examined. The levels of preheat temperature of base metal specimen were ambient temperature, 50, 100 and $150^{\circ}C$ respectively. The result showed that the increase of preheat temperature was a linear relationship with reduction of diffusible hydrogen content in weldment.

• 노동경제논집
• /
• 제25권1호
• /
• pp.23-45
• /
• 2002

노조가입 결정요인을 횡단면 분석한 결과 한국에서 노조가입은 노동자 개인의 노조가입의사(수요 측면)가 아닌 노조가입 가능성(공급 측면)에 주로 좌우되고, 노조 유무는 기업체 규모와 밀접한 상관관계를 가지고 있다. 직무 만족도는 무노조기업 노조가입의사에는 통계적으로 유의미한 영향을 미치지만, 노조가입에는 유의미한 영향을 미치지 않는다. 앞으로 노조 조직률을 제고하려면 노조가입 가능성을 확대해야 하며, 이를 위해서는 제도적 요인과 행위주체 요인을 중시해야 한다.