• Title/Summary/Keyword: Jinju-si

Search Result 76, Processing Time 0.027 seconds

The Effect of Dietary Ionized Water and Premixed Mineral on Fatty Acid and Amino Acid Composition in Finishing Pigs (이온수와 복합광물질 급여가 비육돈의 지방산 및 아미노산 조성에 미치는 영향)

  • Jin, Sang-Keun;Kim, Il-Suk;Song, Young-Min;Kang, Suk-Nam;Je, Yun-Jong;Oh, Hee-Suk;Min, Chan-Sick
    • Food Science of Animal Resources
    • /
    • v.28 no.5
    • /
    • pp.529-534
    • /
    • 2008
  • This study was conducted to determine the effects of ion water and premixed mineral supplementation on the growth performance, carcass, and meat quality parameters in finishing pigs (LY$\times$D). Each 20 pigs were randomly allotted to three treatments; CON (basal diet), T1 (CON diet added active water), T3 (T1 diet added 1.0% premixed mineral). Used ion water and premixed mineral consisted mainly of Zn and Si, respectively. Cholesterol content (mg% meat) were not differ significantly in the samples, however, the ratios of cholesterol to fat in T1 and T2 was significantly lower than the control (p<0.05). The fatty acid qualities of palmitic acid, linoleic acid, arachidonic acid, SFA (saturated fatty acid), EFA (essential fatty acid), and EFA/UFA ratio were the highest significantly, however, those of the oleic acid, UFA (unsaturated fatty acid), and UFA/SFA ratio were the lowest significantly in T2 (p<0.05). The amino acid levels of glutamic acid, alanine, leucine, lysine, total amino acids, and EAA (essential amino acid) were the highest in T1 (p<0.05). Whereas, the levels of serine, valine, isoleucine were the highest in T2 (p<0.05). The results indicate that dietary ionized water and premixed mineral affects fatty acid composition and improves amino acid composition.

Butachlor and Silicate Fertilizer Interaction to Rice (Butachlor와 규산질비료(珪酸質肥料)의 수도(水稻)에 대(對)한 상호작용(相互作用))

  • Oh, B.Y.;Ryang, H.S.;Shin, Y.H.
    • Korean Journal of Weed Science
    • /
    • v.4 no.1
    • /
    • pp.52-61
    • /
    • 1984
  • Pot and laboratory tests were undertaken to investigate the influence of silicate fertilization on butachlor phytotoxicity to rice. Growth of rice seedlings at 150 ppm of $SiO_2$ was stimulated, while adverse effect was observed over 300 ppm of $SiO_2$ and growth reduction was enhanced with combination of butachlor and $SiO_2$ Rice growth in pot trial at 150kg/10a of silicate fertilization was not influenced by recommended amounts of butachlor and nitrofen, however, the growth of Seokwang byeo at 300kg/10a of silicate was markedly retarded by butachlor in the initial stage of growth. Growth reduction of Seokwang byeo caused by combined application of silicate and butachlor was recovered 50 days after herbicide application. Growth reduction from butachlor was not influenced by pH level and also degradation behaviors of butachlor in submerged soil was not altered by silicate fertilization. Adsorbed amount of butachlor on rice root was increased with addition of $SiO_2$ and its amount in Seokwang byeo was higher than that of Jinju byeo. Butachlor absorption by Seokwang byeo was accelerated by 150 ppm of $SiO_2$ applied simultaneously, but those effect was not encountered in Jinju byeo. Butachlor absorption of rice seedlings was also increased by 150 ppm of $K_2O$, while CaO hindered the absorption and $Na_2O$ had no effect on the absorption. Residual level of butachlor in Seokwang byeo treated with combined solution of butachlor and $SiO_2$ was continued higher than that with butachlor alone during 10 days after transplantation to culture solution.

  • PDF

Development of Simplified Formulas to Predict Deformations in Plate Bending Process with Oxy-Propane Gas Flame (산소-프로판 가스 곡가공 공정에서 강판의 변형예측을 위한 계산식 개발)

  • Bae, Kang-Yul;Yang, Young-Soo;Hyun, Chung-Min;Cho, Si-Hun
    • Journal of Welding and Joining
    • /
    • v.25 no.2
    • /
    • pp.70-75
    • /
    • 2007
  • Simplified mathematical formulas are presented to predict deformations during the plate forming process when the heating parameters are given. To obtain the formulas, firstly, the thermal analysis for steel plate is performed, and the thermo-mechanical analysis is followed with actual heating conditions. The analyses have been carried out by the commercial software MARC, which is programmed based on the FEM. Secondary, the results of the mechanical analysis are synthesized with their variables for a statistical approach, which results in simplified formulas. The results of the analysis are well compared with those of experimental measurements.

Experimental Studies on Wet Scavenging of Atmospheric Aerosols by Rain Drops

  • Park Jeong-Ho;Suh Jeong-Min;Choi Kum-Chan
    • Journal of Korean Society for Atmospheric Environment
    • /
    • v.21 no.E3
    • /
    • pp.87-94
    • /
    • 2005
  • Wet scavenging by rain drops is a most important removal process of air pollutants. In order to study the scavenging mechanisms of aerosol particles, the characteristics of chemical components in the rain water were examined as a function of the amount of rainfall. Rain water were collected continuously and separated into the soluble and insoluble components. The elemental concentrations in both components were determined by a PIXE analysis. The physical and chemical characteristics of atmospheric aerosols during the rainfall events were measured simultaneously. The elemental concentrations in rain water decreased substantially just after rain started and then gradually declined in subsequential rain fall exceeding 1.0 mm. The large particles were scavenged more easily than the fine particles. Fe, Ti and Si in rain water were in high insoluble state. Contrarily, almost whole of S was dissolved in rain water.

Parts-Based Feature Extraction of Spectrum of Speech Signal Using Non-Negative Matrix Factorization

  • Park, Jeong-Won;Kim, Chang-Keun;Lee, Kwang-Seok;Koh, Si-Young;Hur, Kang-In
    • Journal of information and communication convergence engineering
    • /
    • v.1 no.4
    • /
    • pp.209-212
    • /
    • 2003
  • In this paper, we proposed new speech feature parameter through parts-based feature extraction of speech spectrum using Non-Negative Matrix Factorization (NMF). NMF can effectively reduce dimension for multi-dimensional data through matrix factorization under the non-negativity constraints, and dimensionally reduced data should be presented parts-based features of input data. For speech feature extraction, we applied Mel-scaled filter bank outputs to inputs of NMF, than used outputs of NMF for inputs of speech recognizer. From recognition experiment result, we could confirm that proposed feature parameter is superior in recognition performance than mel frequency cepstral coefficient (MFCC) that is used generally.

The Influence of Empathy on Interpersonal Competence in Nursing Students (간호대학생의 공감능력이 대인관계 유능성에 미치는 영향)

  • Park, In-Sook
    • Proceedings of the Korea Contents Association Conference
    • /
    • 2017.05a
    • /
    • pp.487-488
    • /
    • 2017
  • 본 연구는 간호대학생의 공감능력이 대인관계 유능성에 영향을 미치는 요인을 규명하는 서술적 조사연구이다. 연구대상자는 198명의 간호대학생이었다. 구조화된 자가 보고식 설문지를 이용하여 자료를 수집하였으며, 자료 분석은 SPSS 18.0 WIN 프로그램을 사용하여 빈도와 백분율, 평균과 표준편차, t-test, ANOVA, Pearson co- rrelation coefficient, multiple regression analy- sis를 실시하였다. 연구결과, 연구대상자의 공감능력이 인간관계 유능성과 유의한 정적 상관관계가 있었다. 회귀분석을 실시한 결과, 공감능력은 인간관계 유능성에 영향을 미치는 유의한 요인으로 나타났으며, 공감에 대한 설명력은 30.0%이었다. 결론적으로, 간호대학생의 대인관계 유능성에 영향을 미치는 공감능력 증진을 위한 중재 프로그램을 개발하여 적용할 필요가 있다.

  • PDF

Various Injection Conditions and Fuel Control of an LPG Liquid Injection Engine (다양한 분사조건과 LPG 액상분사엔진의 연료량 제어)

  • Sim Hansub
    • Transactions of the Korean Society of Automotive Engineers
    • /
    • v.13 no.1
    • /
    • pp.28-35
    • /
    • 2005
  • Fuel injection rate of an injector is affected by various injection conditions such as injection duration, fuel temperature, injection pressure, and voltage in LPG liquid injection systems for either a port-fuel-injection(PFI) or a direct injection(DI) in a cylinder. Even fuel injection conditions are changed, the air-fuel ratio should be accurately controlled to educe exhaust emissions. In this study, correction factor for the fuel injection rate of an injector is derived from the density ratio and the pressure difference ratio. A voltage correction factor is researched from injection test results on an LPG liquid injection engine. A compensation method of the fuel injection rate is proposed for a fuel injection control system. The experimental results for the LPG liquid injection system in a SI-engine show that this system works well on experimental range of engine speed and load conditions. And the fuel injection rate is accurately controlled by the proposed compensation method.

Runoff characteristics of organic matters and nutrients from greenhouse site in paddy field area (논 지역 시설재배지에서의 유기물 및 영양염류 유출 특성)

  • Lee, Keun-Hoo;Ok, Jeong-Hoon;Ryu, Si-Chang;Yu, Chan
    • Proceedings of the Korean Society of Agricultural Engineers Conference
    • /
    • 2005.10a
    • /
    • pp.604-609
    • /
    • 2005
  • Runoff characteristics of organic matters and nutrients from greenhouse site in paddy field area were investigated during the irrigation period in 2004. The greenhouse selected which situated near the Nam river, Jinju, Korea used the ground water as the irrigation purpose. And, the rotating system of paddy field to upland was adapted as a cropping system which is a typical practice in this area. Various items such as total phosphorus(T-P), total nitrogen(T-N), dissolved oxygen(DO), BOD, etc. were observed to figure out the seasonal and spatial variation in the study sites. it was found that the risk of water pollution due to the contamination of nutrients in canals in green house sites, and their neighbouring small sized streams are much higher than those in ordinary paddy field areas. Further surveys and investigations are required to find out the counter measures to reduce water pollution occurred in greenhouse sites.

  • PDF

Influence of Elapsed Years and Physical Properties on Vegetation Invasion of Forest Road Slope (임도시공경과년수 및 물리적 특성이 임도사면의 식생 침입에 미치는 영향)

  • Lee, Joon Woo;Choo, Gab-Chul;Choi, Yeon Ho
    • Journal of the Korean Society of Environmental Restoration Technology
    • /
    • v.5 no.1
    • /
    • pp.28-34
    • /
    • 2002
  • This study was carried out to analyze the effects of elapsed years and physical properties on invaded vegetation of forest road slope. For the study, 8 forest roads in Asan-si of Chungcheongnam-do were selected and 15 factors that might influence on vegetation invasion were analyzed. In generally, vegetation coverage of slope have increased with the elapsed years. But invasion species have decreased in the cut-slope and increased in fill-slope. There was no significant correlation between rate of vegetation coverage and elapsed years, but rate of vegetation coverage was strongly related with slope aspect. And the species of invasion vegetation affected mostly by the elapsed years and slope aspect among the physical properties.