• 수산해양기술연구
• /
• 제50권3호
• /
• pp.252-261
• /
• 2014

Marine casualties originated from fishing vessel occupied about 70% of the whole marine casualties in Korea from 2001 to 2010, this ratio was not much changed as it was before. Therefore a pragmatic counterplan to decrease of casualties in fishing vessel is indispensable for reduction of the nationwide marine casualties. But since the casualties occurred by fishing vessel may have a different causes and counterplan according to the operating type of it, in this paper, fishing vessels classified into 12 types by operating method and inspected the causes and counterplan for that. The operating type of fishing vessel occurred the specific casualties more were jig boat in collisions and fire explosion, trap fishing boat, mixed fishing boats and inshore gill netter in collisions, stow netter in machinery damages and capsizing, offshore gill netter in machinery damages, fish carrier in collisions. It must be emphasized that the higher ranked types of vessels, especially jig boat have to take special care to the approaching vessels under way, trap fishing boat to rear look out and mixed fishing boat must keep on safety speed and be taken an education for advance the skill of operating radar as well. For all 12 types of fishing vessel, it is necessary for an operator to make strict precaution on the other vessel under way systematically and keep the regulation for preventing collisions, and for an engineer on watch to make a check the electricity and the engines periodically for reduction the fire explosion and machinery damages.

• 수산해양기술연구
• /
• 제53권3호
• /
• pp.211-218
• /
• 2017

The catch performance of the silver-white jig for automatic jigging machine, developed to improve the effectiveness of LED fishing lamp in catching squid, was compared to that of the conventional green jig. The vessels used in this investigation were Haesong-ho (A-vessel), a training vessel of Gangwon State University and Haengbok-ho (B-vessel), a commercial fishing boat. In the case of the A-vessel, five to eight automatic jigging machines were used in the fishing operation with a 31.3 kW LED fishing lamp in summer. As for the B-vessel, fourteen automatic jigging machines were used with a 43.2 kW LED fishing lamp in autumn and winter. The results showed that the catch performance of the silver-white jig was similar to that of the green jig in the case of the A-vessel (p>0.05). However, in the case of the B-vessel, the catch performance of the silver-white jig was superior to that of the green jig in both winter (p<0.05) and autumn (P<0.001). Based on the catch performance results regarding the B-vessel in autumn, it is expected that the annual income increase that can be earned by using the silver-white jig will be KRW 26,385,000.

• 대한조선학회논문집
• /
• 제54권4호
• /
• pp.312-320
• /
• 2017

This paper deals with the development of structural test facility for the strength assessment of marine leisure boat built from carbon fiber reinforced plastics (CFRP) materials. The structural test facility consists of test jig, load application and control system, and data acquisition system. Test jig, and load application and control system are designed to accommodate various size and short span to depth ratios of single skin, top-hat stiffened and sandwich constructions in plated structural format such as square and rectangular shapes. A lateral pressure load, typical and important applied load condition to the plates of the hull structure for marine leisure boat, is simulated by employing a number of hydraulic cylinders operated automatically and manually. To examine and operate the structural test facility, five carbon/epoxy based FRP square plates having the test section area of $1m^2$, which are part of CFRP marine leisure boat hull, are prepared and they are subjected to monotonically increasing lateral pressure loads. In the test preparation, considering the symmetry of the plates geometry, various strain gauges and linear variable displacement transformer are used in conjunction with data acquisition system utilizing LabVIEW. From the test observation, the responses of the CFRP hull structure of marine leisure boat are understood by obtaining load to deflection and strain to load curves.

• 수산해양교육연구
• /
• 제23권3호
• /
• pp.351-360
• /
• 2011

In order to reduce the casualties of fishing boats, the author analyzed the fishing boat accident on the 412 cases in Korean maritime safety tribunal for the 2005~2009, and then studied the relation between the weather element and the accidents. According to this studies, the occurring ratio of sea casualty for fishing boat in fog weather was appeared 1 boat per 1.6 days. It means that the restricted visibility condition gives the most influence on the fishing boat accident. The casualties in winter season from November to next January occurred 139(33.7%), and small boats less than 50tons broke out more casualties with 68.4%. From this we can find that small fishing boats are very deeply affected on the sea weather condition. According to the boat types for fishing the casualty of jig boat was ranked first, and collision accident account for first with 77.9% for the types of casualties. As mentioned above, most sea casualties for small fishing boats were resulted from the human factors such as poor watch keeping in invisibility and the bad sea condition, it is necessary for navigation operators and the manager to take more attention to the meteorological factors.

• 한국구조물진단유지관리공학회 논문집
• /
• 제21권5호
• /
• pp.94-100
• /
• 2017

기존의 예인식으로 운용하는 사이드스캔소나의 경우 조사 시 사용자가 원하는 단면 조사에 어려움이 있어 수중구조물 전동 지그가 개발되었지만, 전동지그를 사용한 음파촬영방법의 경우 보트와 소나가 일체 거동하기 때문에 파랑에 의한 보트 롤링현상, 보트운전자의 운용미숙 등으로 인한 음파영상의 흔들림발생 등, 작업환경에 따른 여러 가지 문제로 인하여 데이터의 왜곡이 발생하였다. 따라서 본 연구에서는 기존 사이드스캔소나의 수중조사를 위한 장비운용 시 발생하는 영상의 흔들림을 해결하기 위해, 흔들림 보정센서를 부착하고 흔들림 보정 알고리즘을 개발하여 흔들림보정이 가능하도록 프로그램을 보완하였다. 또한, 소나 데이터 해상도의 향상 정도를 검증하기 위하여, 현장조사를 통해 흔들림 보정 전 후 음파영상을 수집하고 손상 의심부에 잠수사를 투입하여 실제 손상길이 및 수심을 측정하여 취득한 음파영상 데이터의 분석을 수행하였다. 본 연구는 향후 사이드스캔소나를 활용한 구조물의 수중부 및 하상면 음파영상 촬영기법의 발전에 기여할 것으로 판단된다.

• 수산해양기술연구
• /
• 제52권3호
• /
• pp.232-240
• /
• 2016

Marine casualties originated from fishing vessels occupied about 71.2% of the whole marine casualties in Korea from 2008 to 2014, which has not changed much for a long time. Therefore, a pragmatic counterplan to decrease in casualties in fishing vessel is indispensable for reduction of marine casualties in Korea. Since the casualties occurred by fishing vessels may incline to a specific type of casualties according to the difference in the operating type; in this paper, 11 fishing types which occurred casualties frequently in numbers and occupied ratio were selected. Since the most frequent occurring casualties in fishing vessels were from collisions and fire explosion in statistics from KMST (2008~2014), the study focused on them. The collision is given a great deal of weight in all the casualties mostly due to the negligence of duty regardless of the job types. Gill netter, trap fishing boat, jig boat, multiple fishing boat and stow netter have their own specific causes of casualties in collision according to the operating types. The cause of fire explosion was mainly due to poor inspection and maintenance the electric cord. For this reason, it may be necessary for an operator to make strict precaution on the other vessels under way systematically, keep the regulation for preventing collisions, and for an engineer on watch to make a check the electricity periodically to reduce the fire explosion.

• 한국항해항만학회지
• /
• 제44권6호
• /
• pp.439-446
• /
• 2020

세계적인 환경오염 규제 및 IMO(국제해사기구)의 선박 연료 황 함유량 제한으로 LNG를 선박의 연료로 사용하는 연구 및 사업이 활발히 진행되고 있다. 본 연구에서는 기존 연구를 통해 개발된 부유식 LNG 벙커링 터미널(FLBT, Floating LNG bunkering terminal)을 대상으로, STS LNG 벙커링 작업을 위해 이접안 하는 과정을 벙커링 셔틀선의 환경하중을 모형시험과 수치해석으로 평가하였다. 고차경계요소법을 이용한 수치해석으로 가까운 위치에서 상호작용 하는 4척 선박들의 파랑표류력 변화를 검토하였다. 다양한 이접안 거리에 따라 파랑표류력이 크게 변함을 확인 했다. 모형시험은 선박해양플랜트연구소의 해양공학수조에서 이루어졌다. 모형시험에서는 예인선을 모사하여 대상선박을 밀고 당길 수 있는 치구를 고안하였으며 접안시 마찰력 등의 영향 없이 선박을 밀 수 있도록 하였다. 모형시험 결과 LNG벙커링 선박은 대부분의 1년 환경조건에서 안전한 이접안이 가능하였다. 파랑 방향에 따라 안정성의 차이가 존재함으로, FLBT의 Heading conrol 기능을 적용하여 횡파를 피한다면 더욱 안정적인 운용이 가능할 것이다.