• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.2 s.179
• /
• pp.181-190
• /
• 2006

In the industry, three-dimensional coloring has been needed for a realistic prototype. The Z-corporation developed a 3D printer which provides a three-dimensional colored prototype. However, the process cannot be adopted to models fabricated by other rapid prototyping processes. In addition, time and cost for manufacturing colored prototypes still remain to be improved. In this study, a new coloring process using an ink-jet head is proposed for color printing on a three-dimensional surface. Process parameters such as the angle and the distance between the ink-jet nozzle and the three-dimensional surface should be investigated through experiments. In order to minimize the distortion of a 2D image, the correction matrix according to the sloped angle is proposed and obtained by analysis of printing errors. An image on the doubly curved surface is printed so as to verify the proposed method. As a practical example, a helmet is chosen for printing images on the curved surface. The practical applicability of the correction matrix is then demonstrated by printing the character images on the surface of the helmet.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.5 s.248
• /
• pp.413-421
• /
• 2006

The bubble dynamics induced by direct laser heating is experimentally analyzed as a first step to assess the technical feasibility of laser-based ink-jet technology. To understand the interaction between laser light and ink, the absorption spectrum is measured for various ink colors and concentrations. The hydrodynamics of laser-generated bubbles is examined by the laser-flash photography. When an Ar ion laser pulse (wavelength 488 nm) with an output power up to 600 mW is incident on the ink solution through a transparent window, a hemispherical bubble with a diameter up to ${\sim}100{\mu}m$ can be formed with a lifetime in a few tens of microsecond depending on the laser power and the focal-spot size. Parametric study has been performed to reveal the effect of laser pulse width, output power, ink concentration, and color on the bubble dynamics. The results show that the bubble generated by a laser pulse is largely similar to that produced by a thin-film heater. Consequently, the present work demonstrates the feasibility of developing a laser-actuated droplet generation mechanism for applications in ink-jet print heads. Furthermore, the results of this work indicate that the droplet generation frequency is likely to be further increased by optimizing the process parameters.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.3
• /
• pp.61-67
• /
• 2004

In micro hole punching process the burr occurs inevitably, but the burr must be minimized in order to improve the quality and accuracy of the product. In this study, magnetic field-assisted polishing technique is applied to remove the burr which exists in nozzles for ink-jet printer head and proved to be a feasible for deburring by experiment. The deburring characteristics of sheet metals was investigated changing with polishing time and magnetic abrasive size. After the deburring, the burr size has remarkably reduced and roundness of the hole also has improved.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.10a
• /
• pp.329-333
• /
• 2003

In micro hole punching process the burr occurs inevitably, but the burr must be minimized in order to improve the quality and accuracy of the product. In this study, magnetic field assisted polishing technique is applied to remove the burr which exists in nozzles for ink-jet printer head and proved to be a feasible for deburring by experiment. The deburring characteristics of sheet metals was investigated changing with polishing time. After the deburring, the burr size has remarkably reduced and roundness of the hole also has improved.

• Journal of the Semiconductor & Display Technology
• /
• v.14 no.2
• /
• pp.23-27
• /
• 2015

In this paper, eco-friendly paper strain gauge was fabricated in the way of printing strain gauge on paper substrate, using PEDOT:PSS ink and inkjet printer technology. As a p-type conductive high polymer, PEDOT:PSS is known to be piezoresistive effect. I formed a strain gauge by connecting in parallel 5 lines of $60{\mu}m$ width printed with PEDOT:PSS. To minimize surrounding influence such as temperature, I formed wheat-stone bridge by combining 4 strain gauges (quarter-bridge strain gauge) which were made up of PEDOT:PSS 5 lines and measured. In quarter-bridge strain gauge, only two strain gauges, facing each other, arranged in strain and horizontal direction were deformed while the other two strain gauge of vertical direction were not. Therefore, quarter-bridge strain gauge showed the output of half bridge. The fabricated quarter-bridge strain gauge had output sensitivity of $105.6{\mu}V/V{\cdot}mm$ and its output linearity was relatively good.

• Journal of radiological science and technology
• /
• v.20 no.1
• /
• pp.85-90
• /
• 1997

Although many useful arfticles appear in the journals published in Korea, they are not always cited by researchers mainly due to absence of efficient searching system. The author made a program with 4 predefined filtering forms to detect published articles rapidly and accurately. The program was coded using database management system CA-Clipper VER 5.2. I used 486DX-II (8 Mbyte Ram, VGA, 560 Mbyte Hard Disk), desk-jet printer(HP-560k), and MS-DOS VER 5.0. I inputed twenty articles in the journal of Korean Society Radiotechnological Technology. And this program test for retrive article and made database.

• Textile Coloration and Finishing
• /
• v.19 no.2
• /
• pp.24-31
• /
• 2007

This paper addresses factors of line image quality on grain leather printed via inkjet printer. Lines were printed onto coated leather media, and line width, edge blurriness, and edge raggedness were evaluated for line image quality. Various factors influenced to wetting and capillary wicking were studied and found out that wicking through capillary between fibers causes significant feathering on leather surface similar with pulp capillary in copy Paper. Polyurethane and acrylic resin coating resulted good image qualify by reducing capillary wicking. The mixture of polyurethane and acrylic resin applied on grain leather satisfied with both image quality and surface hand. $AllWrite^{TM}$ ink brought best results of image quality, comparing with $VeraPrint^{TM}$ ink and $JetWrite^{TM}$ ink.

• Journal of the Semiconductor & Display Technology
• /
• v.4 no.2 s.11
• /
• pp.21-24
• /
• 2005

Ink-jetting characteristics of pulse width and pulse amplitude for a piezoelectric ink jet printer driver have been mapped with various polymer EL ink. In this study, the jetting characteristics have been classified into 4 regime; no Jetting, unstable jetting, stable jetting, and spraying, and the importance of fluid viscosity on the scope of the stable jetting regime has been emphasized. The relation between jetting speed and the width and amplitude of driving signal has also been investigated and the effect of the speed on the jetting characteristics has been discussed.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.10b
• /
• pp.323-325
• /
• 2000

정보통신의 발전에 따라 컴퓨터 및 주변 장치간에 칼라를 정확히 재생할 수 있는 능력이 산업 경쟁력에 중요한 요소로 부상하고 있다. 본 논문에서는 모니터 상의 이미지를 프린터로 인쇄하기 위하여 사용되는 기존의 참조테이블(Look Up Table) 방식을 살펴보고 이 기능을 대체할 수 있는 신경회로망에 의한 칼라보정 매핑 방법을 제안하였다. 참조테이블 방식에서는 3차원으로 구성된 테이블을 구성하기가 쉽지 않고 구간 사이의 칼라값은 보간법을 써서 구해야 한다. 신경회로망에 의한 방법에서는 일단 학습을 완료하면 실시간으로 칼라를 보정해 주는 장점이 있다. 실험에서는 두 가지 방법에 의한 칼라 샘플의 모델을 통한 결과 값을 비교해 보고 상호간의 장단점과 성능 향상을 위한 방법을 토의하였다.

• Journal of the Korean Ceramic Society
• /
• v.40 no.7
• /
• pp.657-661
• /
• 2003

The elastic moduli or fracture strengths of multi-layered film (SiO$_2$/po1y-Si/SiN/SiO$_2$, 2.77 $\mu\textrm{m}$ thick), CVD diamond film (1.6 $\mu\textrm{m}$ thick), SiO$_2$ film (1.0 $\mu\textrm{m}$ thick) and SiN film (0.43 $\mu\textrm{m}$ thick) made for the membrane of ink-jet printer head were measured with cantilever beam bending method using nanoindenter after fabricating in the form of micro cantilever beam (${\mu}$-CLB). And the elastic moduli of ${\mu}$-CLB of SiO$_2$ film and SiN film were compared with the value of each film on silicon substrate determined with nanoindentation method. The results showed that the modulus and strength of multi-layered film decrease from 68.08 ㎬ and 2.495 ㎬ to 56.53 ㎬ and 1.834 ㎬, respectively as the width of CLB increases from 18.5 $\mu\textrm{m}$ to 58.5 $\mu\textrm{m}$. And the elastic moduli of SiO$_2$ and SiN films measured with ${\mu}$-CLB bending method are 68.16 ㎬ and 215.45 ㎬, respectively and the elastic moduli of these films on silicon substrate measured with nanoindentation method are 98.78 ㎬ and 219.38 ㎬, respectively. These results show that with ${\mu}$-CLB bending technique, moduli can be measured to within 2%.