• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.6
• /
• pp.428-434
• /
• 2005

For the purpose to verify the grain and evaluate milling properties of Korean waxy wheat, com­parison analysis between waxy wheat lines and their respective maternal parents were performed. The waxy lines showed various grain yields of 4.76${\~}$5.79 t/ha depending on parentages, which were corresponding to $80{\~}96\%$ levels of their respective maternal parents. One thousand grain weights of waxy lines were also lighter than its respective part in its parentage by exhibiting 32.8${\~}$34.6 g compared to 32.9${\~}$45.2 g of their parents. Test weights of waxy lines and their parents were 720${\~}$798 g/l and 786${\~}$797 g/l, respectively. The proportions of the grains above 2.5 mm in width were higher in order of Keumgang, Olgeuru, Geuru, SW97134, Suwon 292, Woori, SW97105, and SW97110. Waxy lines exhibited low milling properties by showing the straight flour yields ranging from $61.8\%$ to $67.1\%$ compared with the yields of their parents ranging from $66.1\%$ to $72.5\%$; the waxy lines were significantly lower in first break flour (Bl) and first reduction flour (Rl) yields in the Buller test mill, while significantly higher in the yields of second and third reduction flour (R2 and R3) than the respective ones of their parent wheat.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.55 no.1
• /
• pp.58-64
• /
• 2010

This study was carried out to screen the occurrence of insect pest on the organic seed producing field of minor grain germplasms, Pearl millet (Setaria italic L.), Sorghum (Sorghum bicolor L.), and Common millet (Panicum miliaceum L.) in Gangwon-do from 2008 to 2009. The artificial pheromone traps successfully attracted an Oriental corn borer, Ostrinia furnacalis (Guenee) on Pearl millet, but the Army worm, Pseudaletia separata, was not attracted in all of the minor grain fields. The ratio of damaged plants of Oriental corn borer and Army worm were appeared in order with Pearl millet, Common millet, and Sorghum. The morphological diversities of plant bug were shown as four kinds of species, Eastern green stinkbug (Nezara antennata), Brown-marmorated stinkbug (Halyomorpha halys), Sloe bug (Dolycoris baccarum), and Bean bug (Riptortus clavatus), on the organic seed producing field of minor grain. The average occurrence density of Eastern green stinkbug was the highest level in the three kind of minor grains, Pearl millet, Common millet, and Sorghum in 2008 and 2009. The dominant species are the Eastern green stinkbug and the Bean bug in Pearl millet and Common millet. The Sloe bug and the Bean bug possessed the highest population density in Sorghum.

• Economic and Environmental Geology
• /
• v.43 no.1
• /
• pp.13-20
• /
• 2010

Acid mine drainage (AMD) from abandoned mine sites typically has low pH and contains high level of various heavy metals, aggravating ground- and surface water qualities and neighboring environments. This study investigated removal of heavy metals in a biological treatment system, mainly focusing on the removal by adsorption on a substrate material. Bench-scale batch experiments were performed with a mushroom compost to evaluate the adsorption characteristics of heavy metals leached out from a mine tailing sample and the role of SRB in the overall removal process. In addition, adsorption experiments were perform using an artificial AMD sample containing $Cd^{2+}$, $Cu^{2+}$, $Pb^{2+}$ and $Zn^{2+}$ to assess adsorption capacity of the mushroom compost. The results indicated Mn leached out from mine tailing was not subject to microbial stabilization or adsorption onto mushroom compost while microbially mediated stabilization played an important role in the removal of Zn. Fe leaching significantly increased in the presence of microbes as compared to autoclaved samples, and this was attributed to dissolution of Fe minerals in the mine tailing in a response to the depletion of $Fe^{3+}$ by iron reduction bacteria. Measurement of oxidation reduction potential (ORP) and pH indicated the reactive mixture maintained reducing condition and moderate pH during the reaction. The results of the adsorption experiments involving artificial AMD sample indicated adsorption removal efficiency was greater than 90% at pH 6 condition, but it decreased at pH 3 condition.

• The Journal of Engineering Geology
• /
• v.15 no.4 s.42
• /
• pp.447-462
• /
• 2005

The purposes of this study are to evaluate and discuss the importance of geochemical properties of soil materials that play an important role in the occurrence of the landslide, using analyses of microtexture, particle size distribution, XRC, and FE-SEM equipped with energy dispersive spectrum on soils collected from landslide slopes of gneiss, granite and sedimentary rock areas. Soils from gneiss and granite areas where landslides took place have much clay content relative to those from non landslide areas, particularly pronounced in the granite area. Therefore the clay content is considered a sensitive factor on landslide. Clay minerals contained in soils are illite, chlorite, kaolinite and montmorillonite. Especially the content of clay minerals in soils from the Tertiary sedimentary rocks is highest, with abundant montmorillonite as expandable species. It is believed that this area was much vulnerable to landslide comparable to other areas because of its high content of monoorillonite, even though there might be weak precipitation. Since no conspicuous differentiation in mineralogy between the landslide area and non landslide area can be made, the occurrence of landslide may be influenced not by mineralogy, but by local geography and mechanical properties of soils. Geochemical information on weathering properties, mineralogy, and microtexture of soils is helpful to better understand the causes and patterns of landslide, together with engineering geological analyses.

• Horticultural Science & Technology
• /
• v.32 no.3
• /
• pp.346-352
• /
• 2014

This research was carried out to investigate the effect of supplemental lighting on stable productivity of paprika (Capsicum annuum L.) during low radiation period of winter season. The supplemental lighting sources used in this research were high pressure sodium (HPS) and lighting emitting plasma (LEP). Photosynthetic photon flux density (PPFD) emitted from both lamps decreased as vertical distance from lamp increased. The PPFD of LEP lamps were twice more than that of the HPS lamp per unit distance, but the rate of decreased PPFD of t he LEP per unit distance was higher than that of HPS lamp. And different degrees of PPFD between HPS and LEP lamps by horizontal distance had a smaller degree of difference than by vertical distance at the 100 cm away point. As daily average PPFD measured at the top of the plant under the supplemental lighting during January, the supplemental lighting significantly increased radiation. Radiation of HPS and LEP lighting was 137% and 315% higher than control (without supplemental lighting = sunlight). Air temperature in the top of the plant was not significant different among treatments. HPS and LEP lighting had no effect on increase of flower settings. Leaf length and width with LEP lighting was the longest, photosynthetic was higher than those of other treatments. Supplemental lighting treatments significant increased fruit length and diameter. Especially LEP lighting treatment had a greater effect on fruit length and diameter. In conclusion, LEP lighting treatment during low radiation period greatly affected growth and production of paprika. Further research will be required for the suitable application of LEP lighting in paprika production.

• Applied Chemistry for Engineering
• /
• v.27 no.6
• /
• pp.583-589
• /
• 2016

Lubricant additives including zinc dialkyldithiophosphate (ZDDP) containing metal have been widely used due to the advantage of very low cost, but they can generate impurities such as ash. In this work, ZDDP containing metals was partially replaced with bis[3-(dialkyloxyphosphorothionyl) thio-2-methylpropanyloxy] butane (BAP4s) which was synthesized conveniently and effectively from alkanediol without any metal components. Also, the wear resistance property of synthesized BAP4s were studied. Wear scar diameter (WSD) values of BAP4s with butyl, octyl, decyl, dodecyl or tetradecyl groups were also measured by four-ball test. As the length of the alkyl group increased from 4 to 8, the WSD value of BAP4s decreased rapidly from 0.59 to 0.45 mm, but from 8 to 14, the value increased very slowly from 0.45 to 0.50 mm. Thus, among all BAP4s, B8P4 having BAP4 with the octyl group, showed the lowest WSD value. Furthermore, the WSD values were measured in a lubricant base oil mixed with a 0.50 percent concentration (w/w) of either BAP4 or ZDDP. The former was 0.55 mm, and the latter was 0.45 mm. The thermal stability and tribofilm formation peroperty were also measured by thermogravimetric analyzer (TGA) and energy-dispersive X-rays spectroscopy (EDS), respectively.

• Korean Journal of Ecology and Environment
• /
• v.49 no.1
• /
• pp.11-21
• /
• 2016

Cymbidium kanran Makino is being threatened in its own habitats due illegal collecting and habitat changes by vegetation growth along historical landuse change. In this study, we established habitat restoration model for conservation of C. kanran based on ecological diagnosis. Through exploration to Jeju Island in 2014 and 2015, we identified 27 unknown habitats of C. kanran and in there, abiotic variables and vegetation structure and composition were quantified. Altitudinal distribution of C. kanran was between 200 m~700 m a.s.l. and compared to distribution in 2004, Area of Occupation (AOO) decreased at 82%. Specific habitat affinity was not observed by evenly found in mountain slope and valley and summergreen and evergreen broadleaved forests, but likely more abundant in valley habitats with higher soil and ambient moisture. Total of 96 individual of C. kanran was observed with an average density of $942.6individuals\;ha^{-1}$. The plants showed relatively short leaf length (average=$10.7cm{\pm}1.1cm$) and small number of pseudo bulbs ($1.2{\pm}0.2$). Flowering and fruiting individuals were not observed in field. C. kanran was classified into endangered plant species as CR (Critically Endangered) category by IUCN criteria. Phenotypic plasticity of C. kanran was likely support to sustain in more shaded habitat environment and recent habatat changes to closed canopy and low light availability may exhibit negatively effects to C. kanran's life history. Restoring C. kanran habitat should create open environment as grassland and low woody species density.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.33 no.2
• /
• pp.81-86
• /
• 2013

'Mogwoo', a new high yield and whole crop silage rice (Oryza sativa L.) cultivar, was developed by the rice breeding team of the National Institute of Crop Science, RDA, Suwon, Korea, from 1999 to 2009, and was released in 2010. It was derived in 1999 from a cross between Dasanbyeo, having a high yield, and Suweon431/IR71190-45-2-1. A promising line, SR25848-C99-1-2-1, selected by the pedigree breeding method, was designated the name of 'Suweon 519' in 2007. This cultivar has about 155 days of growth period from seeding to heading, and is tolerance to lodging, with erect pubescent leaves as well as a long and thick culm. This cultivar has the same number of tillers per hill and higher spikelet numbers per panicle compared to Nokyang. 'Mogwoo' has longer leaves compared with other Tongil-type varieties. This new variety is resistant to grain shattering, leaf blast, bacterial leaf blight, and small brown planthopper. The biomass yield of 'Mogwoo' was 1,956 kg/10a in a regional test over three years. The result shows that 'Mogwoo' is adaptable to central and south-east plain areas of Korea.

• Korean Journal of Food Science and Technology
• /
• v.46 no.2
• /
• pp.198-204
• /
• 2014

Ultraviolet B (UV-B) irradiation is a negative factor that induces skin damage, inflammation, and aging. UVB irradiation induces the inflammatory response through interleukin (IL)-6 and IL-8 expression in keratinocytes. In addition, it induces the production of reactive oxygen species (ROS) and the activation of matrix metalloproteinase-1 (MMP-1), which plays an important role in collagen 1 degradation in the extracellular matrix. We investigated the antiaging effects of five kinds of berry in human skin keratinocyte (HaCaT) cells using juice of black raspberry (Rubus occidentalis), blueberry wild (Vacciniun angustifolium) and cultivar (Vacciniun corymbosum), black chokeberry (Aronia melanocarpa (Michx.) Elliott), and mulberry (Morus abla). HaCaT cells irradiated with UV-B exhibited increased ROS generation, as well as IL-6, IL-8, and MMP-1 gene expression, when compared to the control cells that were not irradiated with UV-B. However, pre-treatment of berry juice before UV-B irradiation significantly down-regulated the UV-B-induced ROS generation and inflammatory cytokine and MMP-1 expression. The results suggest that all berries have anti-aging effects including lowering inflammatory cytokine levels, ROS generation, and MMP-1 expression in HaCaT cells during UV-B irradiation.

• Proceedings of the KACD Conference
• /
• 2008.05a
• /
• pp.246-257
• /
• 2008

The purpose of this study was to investigate the influence of various occlusal loading sites and directions on the stress distribution of the cervical composite resin restorations of maxillary second premolar, using 3 dimensional (3D) finite element (FE) analysis. Extracted maxillary second premolar was scanned serially with Micro-CT (SkyScan1072; SkyScan, Aartselaar, Belgium). The 3D images were processed by 3D-DOCTOR (Able Software Co., Lexington, MA, USA). HyperMesh (Altair Engineering. Inc., Troy, USA) and ANSYS (Swanson Analysis Systems. Inc., Houston, USA) was used to mesh and analyze 3D FE model. Notch shaped cavity was filled with hybrid (Z100, 3M Dental Products, St. Paul, MN, USA) or flowable resin (Tetric Flow, Viva dent Ets., FL-9494-Schaan, Liechtenstein) and each restoration was simulated with adhesive layer thickness ($40{\mu}m$). A static load of 200 N was applied on the three points of the buccal incline of the palatal cusp and oriented in $20^{\circ}$ increments, from vertical (long axis of the tooth) to oblique $40^{\circ}$ direction towards the buccal. The maximum principal stresses in the occlusal and cervical cavosurface margin and vertical section of buccal surfaces of notch-shaped class V cavity were analyzed using ANSYS. As the angle of loading direction increased, tensile stress increased. Loading site had little effect on it. Under same loading condition. Tetric Flow showed relatively lower stress than Z100 overall, except both point angles. Loading direction and the elastic modulus of restorative material seem to be important factor on the cervical restoration.