• Tunnel and Underground Space
• /
• v.27 no.1
• /
• pp.50-57
• /
• 2017

In this study, the experiment for determining shock loss at the branch is conducted for the design of network double-deck road tunnel ventilation. The shock loss coefficient that determines the quantity of shock loss has been considered only regarding the constant aspect ratio of circular or rectangular section. However the suggestion of shock loss coefficient is needed since the aspect ratio of double-deck road tunnel for small vehicle is considered around 1:3 with the low height in Korea. The experiment model was made with the scale of around 1:23 applying Reynolds similarity law, so that the shock loss coefficient on the branch of the large aspect ratio was measured. The result of the study showed that shock loss coefficients of both split branch and straight branch were measured two to three times higher than those calculated from the theoretical equation or design values of previous studies. Therefore the study resulted the effect of large aspect ratio on shock loss coefficient was huge, and it is expected that precise design value can be suggested for the design of network double-deck tunnel ventilation.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.5
• /
• pp.411-422
• /
• 2010

Self-sensing on micro-failure, dispersion degree and relating properties, of carbon nanotube(CNT)/epoxy composites, were investigated using wettability, electro-micromechanical technique with acoustic emission(AE). Specimens were prepared from neat epoxy as well as composites with untreated and acid-treated CNT. Degree of dispersion was evaluated comparatively by measuring volumetric electrical resistivity and its standard deviation. Apparent modulus containing the stress transfer was higher for acid-treated CNT composite than for the untreated case. Applied cyclic loading responded well for a single carbon fiber/CNT-epoxy composite by the change in contact resistivity. The interfacial shear strength between a single carbon fiber and CNT-epoxy, determined in a fiber pullout test, was lower than that between a single carbon fiber and neat epoxy. Regarding on micro-damage sensing using electrical resistivity measurement with AE, the stepwise increment in electrical resistivity was observed for a single carbon fiber/CNT -epoxy composite. On the other hand, electrical resistivity increased infinitely right after the first carbon fiber breaks for a single carbon fiber/neat epoxy composite. The occurrence of AE events of added CNT composites was much higher than the neat epoxy case, due to micro failure at the interfaces by added CNTs.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.17 no.1
• /
• pp.9-15
• /
• 2012

Worldwide development of harmful algal blooms causes serious problem for public health and fisheries industries. To evaluate the algicidal impact on the harmful algae bloom species in aquatic ecosystems of coast, a new algicide thiazolidinedione derivative (TD49) were tentatively examined in the growth stages (i.e., lag, logarithmic and stationary phase) of rapidophyceae $Heterosigma$ $akashiwo$, $Chattonella$ $marina$ and $Chattonella$ sp..Three strains could easily destroy in the lag phase due to relatively weak cell walls than those of the logarithmic and stationary phase. It is thought that inoculation of TD49 substances into initial or developmental natural blooms with a threshold concentration ($2{\mu}M$) can maximize the algicidal activity. Also, bio-chemical assays revealed that the algicidal substances from all culture strains were likely to be extracellular substances because those cells have easily destroyed in cell walls. On the other hand, natural zooplankton communities were influenced within the exposure experiments of $2{\mu}M$, which is showed the maximum algcidal activity of tested organisms. These results indicate that although the TD49 substance is potential agents for the control of $H.$ $akashiwo$, $C.$ $marina$ and $Chattonella$ sp. in the enclosed eutrophic bay and coastal water, more detailed research of acute toxicity effect on high trophic organism in marine ecosystems need to be conducted.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.26 no.5
• /
• pp.687-692
• /
• 2012

Schizandra chinensis extract has been known to possess a variety of efficacy including antitumor. However, it remains unclear how schizandrin, which is a major biological active ingredient of Schizandra chinensis, exerts antitumor effect. This study was designed to investigate the mechanism by which schizandrin inhibits tumor growth and metastasis. In in vivo test using tumor model mice injected with B16BL6 cell line, mice treated with 10 and 100 ${\mu}g/ml$ schizandrin showed a significant inhibition by $73.79{\pm}6.43%$ and $90.46{\pm}1.72%$, respectively, compared with positive tumor controls. Schizandrin did not exert a significant toxicity for the normal cells (HUVECs) and tumor cell lines (A549, B16BL6, Du145, Huh7). Treatment with schizandrin at 10 and 100 ${\mu}g$/head significantly inhibited the tumor-induced angiogenesis by $68.04{\pm}32.21%$ and $103.8{\pm}34.99%$ compared with the positive control group, respectively. Using in vivo lung metastasis model, tumor metastasis assay revealed that 10 and 100 ${\mu}g$/head schizandrin significantly decreased the metastatic lung tumor by $37.51{\pm}8.15%$ and $75.53{\pm}4.38%$ compared with positive controls, respectively. On the other hand, schizandrin did not affect the adherence of B16BL6 cell line to extracellular matrix protein. These results demonstrate that schizandrin exerts inhibitory effect on tumor growth and metastasis by inhibiting angiogenesis. This study thus suggest that schizandrin may be a candidate molecule target for cancer drug development.

• Tribology and Lubricants
• /
• v.30 no.5
• /
• pp.278-283
• /
• 2014

Carbon nanotubes (CNTs) are used in various composite materials to enhance electrical, thermal and mechanical properties of composite materials. In this study, we investigate the wear characteristics of polycarbonate/acrylonitrile-butadiene-styrene (PC/ABS) blends containing multi-walled carbon nanotubes (MWCNTs). PC/ABS blends are commonly used in many industrial applications such as cellular phones and display cases and MWCNTs have been added to the PC/ABS blends to improve their electromagnetic interference shielding (EMS). We performed wear tests on PC/ABS blends containing MWCNTs under reciprocating linear sliding conditions with chrome steel balls as a counterpart material. The normal loads were 10, 30, 50, 70, 100 N, the sliding speed was 10 mm/s, the stroke length was 15 mm, and the tests lasted 900 s. The MWCNTs included in the PC/ABS blends lower the wear volume and friction coefficient of the composites. We analyzed the wear debris collected from the composites during the tests in terms of the MWCNT concentration using inductively coupled plasma optical emission spectroscopy. The results show that the quantity of MWCNTs in the debris is proportional to the concentration of MWCNTs in the composite, indicating that the exposure of the MWCNTs to environments by wear could be increased with their concentration in the composite.

• Radiation Oncology Journal
• /
• v.29 no.4
• /
• pp.243-251
• /
• 2011

Purpose: To evaluate the prognostic value of metabolic tumor volume (MTV) and maximum standardized uptake value (SUVmax) on initial positron emission tomography-computed tomography (PET-CT) and investigate the clinical value of SUVmax for early detection of locoregional recurrent disease after postoperative radiotherapy in patients with locally advanced head and neck squamous cell carcinoma (HNSCC). Materials and Methods: A total of 100 patients with locally advanced HNSCC received primary tumor excision and neck dissection followed by adjuvant radiotherapy with or without chemotherapy. The MTV and SUVmax were measured from primary sites and neck nodes. The prognostic value of MTV and SUVmax were assessed using initial staging PET/CT (study A). Follow-up PET/CT scan available after postoperative concurrent chemoradiotherapy or radiotherapy were evaluated for the SUVmax value and correlated with locoregional recurrence (study B). A receiver operating characteristic (ROC) curve analysis was used to define a threshold value of SUVmax with the highest accuracy for recurrent disease assessment. Results: High MTV (>41 mL) is negative prognostic factor for disease free survival (p = 0.041). Postradiation SUVmax was significantly correlated with locoregional recurrence (hazard ratio, 1.812; 95% confidence interval, 1.361 to 2.413; P < 0.001). A cutoff value of 5.38 from follow-up PET/CT was identified as having maximal accuracy for detecting locoregional recurrence by ROC analysis. Conclusion: MTV at staging work-up was significantly associated with disease free survival. The SUVmax value from follow-up PET/CT showed high diagnostic accuracy for the detection of locoregional recurrence in postoperatively irradiated HNSCC.

• Journal of Veterinary Clinics
• /
• v.29 no.3
• /
• pp.226-232
• /
• 2012

This study was performed to evaluate the sedative and analgesic effects of intravenous (IV) administration of detomidine (D) and tramadol (T) to horses. Six warmblood horses each received D (10 ${\mu}g/kg$), T (2 mg/kg), and a combination of DT (10 ${\mu}g/kg$ and 2 mg/kg). No significant differences in the heart rate, respiratory rate, rectal temperature, indirect arterial pressure, and gastrointestinal motility between D and DT were observed. The sedative effect was evident within 5 min after D and DT administration, but no significant difference between D and DT was observed. D and DT induced a similar analgesic effect up to 50 min after injection and DT maintained a longer analgesic effect than D. A significant increase in blood glucose was shown for D after the injection, but not for DT. A horse with T and DT showed an excited behavior within 5 min of the injection. This study suggests that the DT combination could be used for diagnostic procedures and simple surgeries in standing horses, with caution for excitement in the early phase after the administration.

• Korean Journal of Soil Science and Fertilizer
• /
• v.48 no.2
• /
• pp.125-131
• /
• 2015

Phenyllactic acid (PLA) which is known as antimicrobial compound can be synthesized through the reduction of phenylpyruvic acid (PPA) by lactate dehydrogenase (LDH) of lactic acid bacteria (LAB). LAB producing PLA was isolated from Korea Kimchi and identified to Lactobacillus plantarum SJ21 by 16 rRNA gene sequence analysis. Cell-free supernatant (CFS) from L. plantarum SJ21 was assessed for both the capability to produce the antimicrobial compound PLA and the antifungal activity against four fungal pathogens (Rhizoctonia solani, Aspergillus oryzae, Botrytis cinerea, and Collectotricum aculatum). PLA concentration was investigated to be 3.23mM in CFS when L. plantarum SJ21 was grown in MRS broth containing 5mM PPA for 16 h. PLA production also could be promoted by the supplement of PPA and phenylalanine in MRS broth, but inhibited by the supplement of 4-hydroxyphenylpyruvic acid and tyrosine as precursors. Antifungal activity demonstrated that all fungal pathogens were sensitive to 5% CFS (v/v) of L. plantarum SJ21 with average growth inhibitions ranging from 27.32% to 69.05% (p<0.005), in which R. solani was the most sensitive to 69.05% and followed by B. cinerea, C. aculatum, and A. oryzae. The minimum inhibitory concentration (MIC) for commercial PLA was also investigated to show the same trend in the range from $0.35mg\;mL^{-1}$ (2.11 mM) to $0.7mg\;mL^{-1}$ (4.21 mM) at pH 4.0. The inhibition ability of CFS against the pathogens was not affected by heating or protease treatment. However, pH modification in CFS to 6.5 caused an extreme reduction in their antifungal activity. These results may indicate that antifungal activities in CFS were caused by acidic compounds like PLA or organic acids rather than proteins or peptides molecules.

• Journal of Korean Society of Water and Wastewater
• /
• v.28 no.1
• /
• pp.13-23
• /
• 2014

A lab-scale Anaerobic Baffled Reactor (ABR) was applied to treat a primary sludge taken from a municipal wastewater treatment plant. In this experiment, acidogenic reaction was promoted by operating the ABR with short hydraulic retention time (HRT) to produce sufficient volatile fatty acids (VFA) instead of production of methane. The performance of ABR on the VFA production and total solids reduction was observed with different operating conditions with 2, 4, 6, and 8 days of HRT. Corresponding organic loading rates were 6.7, 3.4, 2.2, and $1.6kgCOD_{cr}/m^3{\cdot}day$. As HRT increased the removal rate of TCOD was also increased (82.5, 84.2, 96.9, and 95.9 % in average for HRT of 2, 4, 6, and 8 days, respectively) because the settlement of solids was enhanced in the baffle by the decrease of upflow velocity. At HRT of 2 days the average concentration of VFA in the effluent was measured at $1,306{\pm}552$ mgCOD/L corresponding to 107 % increment as compared to the VFA concentration in the influent. However, as HRT increased VFA concentraiotn was decreased to $143{\pm}552$ mgCOD/L at HRT of 8 days. The reduction rates of total solids were 12.2, 26.5, 24.8, and 43.0 % for HRT of 2, 4, 6, and 8 days. As HRT increased the hydrolysis of organic particulate matters in the reactor was enhanced due to the increasing of solids retention time in the baffle zone with low upflow velocity in long HRT condition. Consequently, we found that a primary sludge became a good source of VFA production by the application of ABR process with HRT less than 4 days and the 12-26 % of total solids reduction was expected at these conditions.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.51 no.3
• /
• pp.432-440
• /
• 2015

The hydro-acoustic technology has been widely used in not only South Korea but also many foreign countries for various scientific purposes. Unfortunately acoustic data especially collected from field surveys may contain noises caused by a variety of sources. Therefore, it is exceedingly important to eliminate noises when acoustic data are analyzed to derive quantitative results. This study introduced two methods for eliminating noises easily and effectively using post-processing software. Used acoustic data were collected on the Jinhae bay and Tongyeong coast of the South Sea in April 2015. The first method, that is the Wang's method, placed emphasis on 'erosion filter' to eliminate only data samples contaminated by noises. The second method (Yamandu's method) focused on the 'resample by number of pings' to remove pings contained noises. To substantiate the effectiveness of two methods, the mean Sv (Volume backscattering strength), mean height and depth of the fish schools detected were compared between before and after using the noise elimination methods. In the Wang's method the mean Sv was decreased from -52.4 dB to -52.9 dB, and in the Yamandu's method from -52.6 dB to -53.3 dB, indicating that noises were successfully eliminated. The mean height (1.5 m) and depth (19.0 m) were same between before and after using two methods showing that the shapes of fish schools were not changed.