• 제목/요약/키워드: Jacket design

검색결과 544건 처리시간 0.022초

엔진 내 냉각수 유동형태가 연소실 벽면온도에 미치는 영향에 관한 연구 (Effect of Coolant Flow Pattern on Metal Temperature of Combustion Chamber)

  • 민병순;최재권
    • 한국자동차공학회논문집
    • /
    • 제1권1호
    • /
    • pp.14-21
    • /
    • 1993
  • The effect of coolant flow pattern on the metal temperature of the combustion chamber was studied in 1.5L and 1.8L gasoline engines. One of the main important points in the design of the water jacket is the increase of the coolant flow velocity. In this paper, the water jackets of the cylinder head and the cylinder block were visualized for the purpose of improving the coolant flow pattern. By the use of this technique, the optimal design of the size and th location of the water transfer fole was possible. And, to lower the metal temperatures of the thermally critical parts, the drilled water passages were employed. To investigate of effect of the improved flow pattern and the drilled water passages, the metal temperatures of the combustion chamber were measured. As a result of the temperature measurement, it was found out that both the change of flow pattern and the drilled water passages have significant effect on the reduction of the peak metal temperature.

  • PDF

Restoration of pre-damaged RC bridge columns using basalt FRP composites

  • Fahmy, Mohamed F.M.;Wu, Zhishen
    • Earthquakes and Structures
    • /
    • 제14권5호
    • /
    • pp.379-388
    • /
    • 2018
  • This study aims to identify the effect of both longitudinal reinforcement details and damage level on making a decision of repairing pre-damaged bridge columns using basalt fiber reinforced polymer (BFRP) jackets. Two RC bridge columns with improper details of the longitudinal and/or transverse reinforcement were tested under the effect of a constant axial load and increasing lateral cyclic loading. Test results showed that the lap-splice column exhibited an inferior performance where it showed rapid degradation of strength before achieving the theoretical strength and its deformation capacity was limited; however, quick restoration is possible through a suitable rehabilitation technique. On the other hand, expensive repair or even complete replacement could be the decision for the column with the confinement failure mode. After that, a rehabilitation technique using external BFRP jacket was adopted. Performance-based design details guaranteeing the enhancement in the inelastic performance of both damaged columns were addressed and defined. Test results of the repaired columns confirmed that both reparability and the required repairing time of damage structures are dependent on the reinforcement details at the plastic hinge zone. Furthermore, lap-splice of longitudinal reinforcement could be applied as a key design-tool controlling reparability and restorability of RC structures after massive actions.

골프장 캐디를위한 스마트 유니폼 프로토 타입 제안에 관한 연구 (A Study on a Proposal for Smart Uniforms for Caddies at Golf Courses, including a Study of Prototypes)

  • 김선영;김미현
    • 복식
    • /
    • 제61권3호
    • /
    • pp.111-121
    • /
    • 2011
  • This paper intends to improve caddies' vocational efficiency, to increase the quality of caddies' services for customers, and further, to widen the application of smart clothes by proposing prototypes of smart uniforms in which caddies' vocational characteristics are reflected. The smart uniforms proposed by this study were restricted to those for spring and fall seasons and three types for a jacket, a turtle neck shirt, pants, and a jumper were proposed. Each design was developed to contain functionality and aesthetic, and also to be transformed subject to weather or other conditions. In addition, the uniforms were designed to carry not only a two-way radio and a remote controller for a cart that caddies necessarily carry, but also i-Pod, a distance meter, and other digital tools by use of solar cells. That is, this paper proposed the designs that can meet with caddies' vocational characteristics and different conditions. This paper is regarded meaningful in that smart clothes, which are forecasted as a future high value-added business, are applied to the uniforms of various job types so they can expand me existing functions of uniforms and further, think about the ways of being used for higher value-added products through the fusion with technologies.

2001년도 한복의 디자인 경향과 문양에 관한 연구 (A Study on the Korean Dress Design Trends and Patterns in used the Korean Dresses in 2001)

  • 권순정;송경자
    • 한국의류산업학회지
    • /
    • 제4권2호
    • /
    • pp.128-136
    • /
    • 2002
  • This research was designed to study the Korean dress design trends and different kinds of ancient patterns applied to the Korean dresses in 2001. The trend sources were collected by the HANBOK monthly journal and the symbolism of patterns associated with these patterns being used the prevalent Korean dress collection in markets. The results of the research can be summarized as following; The most of Korean dress image was elegant of ancient mode. Main colors of the traditional Korean jacket were white, yellowish white and green. However, main color of the traditional Korean skirt was represented as red. A plant pattern was the most popular pattern in a practical purpose. It looks beautiful and it is also easily manufactured with open space. Copying other patterns definitely damage the elegance of the Korean dress. It is time for us to not only keep our own traditions but also study and develop new patterns. Designers must study to develop the image and patterns which are agreed with consumer's taste.

휠체어를 사용하는 성인 남성 장애인의 의복실태 조사 (A Research Study on the Actual Conditions of Clothing of Disabled Men using Wheelchair)

  • 박광애;권영아
    • 한국의류산업학회지
    • /
    • 제10권4호
    • /
    • pp.455-463
    • /
    • 2008
  • The purpose of this study is to investigate the actual conditions of clothing of disabled adult men using wheelchair, to understand dissatisfactions and problems in wearing garment, and to construct basic data to development of the formal wear for wheelchair user. This study conducted survey of 162 men using wheelchair who regularly enjoy the sports for disabled people or who work in society. The results of this study are follows. The majority of wheelchair user tend to wear garment lying or seating. Therefore, they prefer garments that can be easily put on and off. They were dissatisfied mostly with the size of ready-made garment. More than 75% of the subjects tend to repair the purchased formal wear. Shoulder width and bust circumference are too small, jacket length, sleeve length, and slacks length are too big for disabled men using wheelchair. More than 93% subjects tend to prefer T-shirts, because of comfort and easiness to move. The men using wheelchair consider the function and the hygiene of fabric material for T-shirts as the important end.

액세서리 착용이 여성의 전문성 및 매력성 평가에 미치는 영향 (The Effect of Accessory Wearing on Professionalism and Attractiveness of Women)

  • 이명희
    • 한국의상디자인학회지
    • /
    • 제8권1호
    • /
    • pp.1-12
    • /
    • 2006
  • The purpose of this study was to find out differences of women's professionalism and attractiveness according to the perceiver's level of interest on accessory, the object person's age, and accessory wearing. Subjects were 178 college women in Seoul. The evaluation of the accessory wearing was divided into five dimensions: professionalism, attractiveness, loveliness, femininity, and individuality. The look of accessory wearing had significant influences on the evaluation of professionalism and attractiveness. The women in their 40's wearing the scarf on a jacket were evaluatedhigh in professionalism, attractiveness, and femininity. The 40's wearing the cap with a T-shirt were evaluatedlow in professionalism and attractiveness. The women in their 20's wearing the cap with a T-shirt were evaluatedhigh in attractiveness and loveliness. Wearing of scarf enhanced professionalism, femininity, and individuality, wearing necklace enhanced femininity, and wearing cap enhanced loveliness of women. Perceiver's level of interest on accessory gave significant influences on perception of professionalism and attractiveness. The object person's age gave significant influences on loveliness, femininity, and individuality. Professionalism, attractiveness, loveliness, and femininity had interaction effects according to object person's age and accessories. When women in their 40's wore scarf or necklace, their professionalism was raised more than those in their 20's. Therefore accessory wearing was more effective to the women in their 40's than the 20's.

  • PDF

한복치마 원형제도법 개발을 위한 연구 (Exploration of a Prototype Drafting Method for Hanbok Chima)

  • 정옥임
    • 대한가정학회지
    • /
    • 제48권2호
    • /
    • pp.75-83
    • /
    • 2010
  • Hanbok Chima, a Korean skirt, with large-volume should have an archetypal drawing model for appropriate cultural and historical accuracy. In order to develop new Hanbok Chima archetypal drawings we drew a skirt by connecting height with a design structure adopted from Jeogori, a Korean jacket. As a result, an archetypal drawing was developed from which circumference of lower width of Chima, size of pleats in waist circumference, and length of Chima as well as a scheme of layering Chima and Jeogori can be obtained. In this drawing, width of Chima can increase or decrease naturally according to height. However, in case of same heights and different chest circumferences if 2.5cm of additional value is provided for every 5cm increase in chest circumference, Chima of any size can be made based on this drawing. In conclusion, given the demonstrated practicality of designing a Hanbok Chima with large-volume based on archetypal drawings, it is expected that the results of this study will provide useful scientific data for Korean costume designs.

Evaluating seismic demands for segmental columns with low energy dissipation capacity

  • Nikbakht, Ehsan;Rashid, Khalim;Mohseni, Iman;Hejazi, Farzad
    • Earthquakes and Structures
    • /
    • 제8권6호
    • /
    • pp.1277-1297
    • /
    • 2015
  • Post-tensioned precast segmental bridge columns have shown high level of strength and ductility, and low residual displacement, which makes them suffer minor damage after earthquake loading; however, there is still lack of confidence on their lateral response against severe seismic loading due in part to their low energy dissipation capacity. This study investigates the influence of major design factors such as post-tensioning force level, strands position, columns aspect ratio, steel jacket and mild steel ratio on seismic performance of self-centring segmental bridge columns in terms of lateral strength, residual displacement and lateral peak displacement. Seismic analyses show that increasing the continuous mild steel ratio improves the lateral peak displacement of the self-centring columns at different levels of post-tensioning (PT) forces. Such an increase in steel ratio reduces the residual drift in segmental columns with higher aspect ratio more considerably. Suggestions are proposed for the design of self-centring segmental columns with various aspect ratios at different target drifts.

한국과 아시아 지역 저가 항공사 여승무원의 유니폼 디자인 비교 분석 (Comparative analysis on uniform designs of female flight attendant among low cost carriers in South Korea and Asian region)

  • 김선영
    • 복식문화연구
    • /
    • 제23권2호
    • /
    • pp.176-192
    • /
    • 2015
  • This work aims at analyzing the comparative feature about female flight attendant uniform designs of Korean and Asian region low cost carriers and providing some basic materials for development of these airline companies. As a research method, examinations were carried out on attendant's uniform both theoretically and empirically. Comparison of uniforms was made among the five Korean carriers and ten typical Asian carriers for empirical research. Results showed the followings. First, all Korean low cost carriers were characterized as formal style except Jin Air. Unlike this, Asian low cost carriers appeared as diverse including formal, semi formal, and casual styles with a uniquely differentiated image. Second, all carriers applied their own symbolic color to their uniform. Third, logo or symbol was adopted as a pattern on scarf in the two Korean companies but it didn't take effect practically. For those Asian carriers, embroidery was used on jacket, jumper and collar. They utilized even a merchandising character to put emphasis on airline image. Fourth, diverse petty items with a decorative effect were used in the case of Korean low cost carriers. In the changing period of uniform, nothing much was changed and remained almost the same as before. Those in the Asian region were characterized with the smallest number of items and the preclusion of decorative add-ons on uniform.

新疆의 古代 出土服飾에 관한 硏究 (A Study on the Ancient Excavated Clothing in Xinjiang)

  • 김용문
    • 복식문화연구
    • /
    • 제4권2호
    • /
    • pp.187-206
    • /
    • 1996
  • The Purpose of this study is to analyze the clothing excavated in Xinjinag, concerned with the study of clothing culture in Central Asia. The results are as follows : A headwear is a corn hat or round hat, the material is field, fur or woolen textiles. For hair accessories, feathers or wooden pins were used. The corn hats of the Scythians and the Huns also had same design and did not change even after being influenced from the culture of Han Dynasty. A woman's hair styles was many strips of braid, a man's hair style was a braid or a topknot. Regarding the clothing, a woman wore pull-over type and a man wore caftan for a jacket. Both a man and a woman wore widened coat and trousers as well as felt socks and leather boots, and longer socks than boots are the characteristics of the clothing of nomadic horsemen. The textiles was mainly wool, but silk was used for coats, socks and gloves in high society imported from China through the Silk Road after the 2nd century B.C. Compared with Korea clothing, a corn hat, widened coat, trousers and leather boots are similar with those of Koguryo. The influence of western culture is shown in a man's short hair, animal design, W1-Kum, a woman's pull-over type and a round neckline.

  • PDF