• Nuclear Engineering and Technology
• /
• v.56 no.2
• /
• pp.666-672
• /
• 2024

In the present work, a new brick series based on the Vietnamese white clay minerals from the Bat Trang was fabricated to be applied in the radiation protection applications during the decommissioning of the nuclear power reactors. The bricks were constructed under various pressure rates varied from 7.61 MPa to 114.22 MPa. The influence of pressure rate on the physical and γ-ray shielding properties were investigated in the study. The experimental measurement for the material's density using the MH-300A density meter showed an enhancement in the prepared bricks' density by 22.5 % with increasing the applied pressure rate while the bricks' porosity reduced by 31.2 % when the pressure rate increased from 7.61 MPa to 114.22 MPa. The increase in the fabricated bricks density and the reduction in their porosities enhances the bricks' linear attenuation coefficients as measured by the NaI (Tl) detector along the energy range extended from 0.662 MeV to 1.332 MeV. The linear attenuation coefficient increased by 13.8 %, 17.6 %, 17.0 %, and 17.1 % at gamma ray energies of 0.662 MeV, 1.173 MeV, 1.252 MeV, and 1.332 MeV, respectively. The enhancement in the linear attenuation coefficient increases the bricks' radiation protection efficiency by 10.22 %, 14.48 %, 14.09 %, and 14.26 % at gamma ray energies of 0.662 MeV, 1.173 MeV, 1.252 MeV, and 1.332 MeV, respectively.

• Journal of the Korean Magnetics Society
• /
• v.3 no.3
• /
• pp.179-184
• /
• 1993

The X-ray diffraction pattern of amorphous $Fe_{78}Si_{9}B_{13}$ alloy was analyzed to obtain the radial distribution function (RDF) where the first peak was in the form of Gaussian function. The calculated coordination number of the form of Gaussian functiono The calculated coordination number of the sample is 13.5, the mean distance betweeon near-neighbor atoms $r_{0}$ is $2.595{\AA}$ and a Gaussian parametet ${\delta}r$ indicating near-neighbor atomic distri-bution is $0.27{\AA}$. The temperature dependence of saturated magnetization at low temperature could be explained by spin wave excitations theory yielding the spin wave stiffness constant as $117.8\;meV\;{\AA}^2$. Also, we tried to fit the observed temperature dependence of saturated magnetization with the Handrich's equation of the modified molecular field theory for the amorphous ferromagnet. Nice fittings are obtained when we used the parameters ${\Delta}=0.32$(S=1/2) and ${\Delta}=0.23$(S=1), respectively. Finally, the calculated spin wave stiffness constant using the parameters and the structural data are $149\;meV\;{\AA}^2$ for S=1/2 and $138\;meV\;{\AA}^2$ for S=1, respectively. The mean exchange coupling integral between near-neighbor atoms was estimated to be 17.9 meV for S=1/2 and 6.7 meV for S=1.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.1
• /
• pp.20-26
• /
• 2008

This study investigated the antioxidative effect of mugwort (Artemisia vulgaris L.) extracts in hairless mouse skin from oxidative stress induced by UV-irradiation. After topical application on hairless mouse back with basic skin lotion group (control), ascorbic acid group (AA-0.5%, AA-1.0%, AA-2.0%, and AA-5.0%), and mugwort extract group (ME-0.5%, ME-1.0%, ME-2.0%, and ME-5.0%), the animals were irradiated to increasing doses of UVB (60 $mJ{\sim}100$ mJ) for 4 weeks. Hydrogen peroxide of hairless mouse skin homogenate significantly decreased in 2% (p<0.05) and 5% (p<0.05) of ME and AA groups. Hydroxyl radicals were decreased significantly in both of 2% and 5% ME groups as compared to AA groups (p<0.05). Oxidative stress levels deduced by oxidized protein contents were greatly decreased ($14.6{\sim}18.5%$) in all ME treatment groups, while only at 2% of AA treatment group. Lipid peroxide contents were greatly inhibited in all ME and AA treatment groups (p<0.01). Application of ME significantly increased catalase activity, over 25% in all mugwort and AA groups. Glutathione peroxidase activities were increased up to $20.5%{\sim}32.8%$ in 2.0% and 5% ME groups, whereas it increased in all AA groups. These results suggested that mugwort extract was more effective than that of ascorbic acid in protecting hairless mouse skin from photo-irradiation, and can be used as an potential anti-aging cosmetic ingredients.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.5
• /
• pp.934-941
• /
• 2006

Mobile machines displayed many problems in environment of Mobile data nin. So each Mobile companies made each emulator and API. As the result, CP Company had to support not special integrated service but each one tested and developed to each emulator for all Mobile companies. Those kinds of problems had caused the necessity of Mobile contents conversion system. In this theses, it presents the way to reduce huge expense by embodying contents conversion system that can convert each different contents to suitable one at each company and either how to not only improve reciprocal processing ability of data, but only to reduce expenses and efforts for development of public data and softness of program by using XML documents in environment of Mobile data service.

• The KIPS Transactions:PartD
• /
• v.16D no.3
• /
• pp.361-370
• /
• 2009

Recently, the most mobile application software developers are being faced by short developing time (fast time-to-market), various requirements and requirement changes. In order to overcome the environment, developer should support user friendly GUI and assure the quality from the early developing process using GUI test method. This paper proposes a test method and tool for mobile software GUI, which reduces test time and supports comfortable test environment by user oriented UI design. We implemented a tool based on test scenarios based image flow for high testing accuracy and test case reusability. And the results show the characteristics of the method compared to the existing tools.

• Journal of environmental and Sanitary engineering
• /
• v.14 no.4
• /
• pp.117-123
• /
• 1999

The analytical instrument method was applied to analyze malodorous sulfur compounds emitted from industrial fields. Six factories and two sites which release malodorous substances into ambient air were selected to determine the level of hydrogen sulfide($H_2S$), methylmercaptan(MeSH), dimethyl sulfide($Me_2S$), and dimethyl disulfide($Me_2S_2$) using automated thermal desorption system (STD400) and GC-FPD in summer and fall seasons of 1999. The Air sampler for ATD400 uses a small pump to draw sample and a mass flow controller to adjust sample amount without using a dilution apparatus. The trap temperature of ATD400 reached to $-80^{\circ}$ by supplying liquid nitrogen and $H_2S$ can be analyzed under this condition. The recovery rates of $H_2S$, MeSH, $Me_2S$, and $Me_2S_2$ of odorous sulfur compounds standard were shown 98.2%, 93.6%, 98.2%, 99.4% respectively. The concentrations of $Me_2S$ at outside boundary of G market, L factory, and J factory were 0.018ppm, 0.021ppm, 0.032ppm in summer, respectively. The concentration of $H_2S$ at Nanjido landfill was 1.167ppm in summer, but that of $H_2S$ was not detected in fall because of soil covering. The concentration of H2S and $Me_2S_2$ at inside of Chonggye stream were 0.564ppm and 1.045ppm in summer, while those of H2S and Me2S2 were 0.285ppm and 0.465ppm in fall, respectively.

• Journal of the Korean institute of surface engineering
• /
• v.34 no.5
• /
• pp.414-420
• /
• 2001

A 30-kV plasma immersion ion implantation setup (P $I^3$) has been equipped with a self-developed 6'-magnetron to perform hard coatings with enhanced adhesion by P $I^3$D(P $I^3$ assisted deposition) process. Using ICP source with immersed Ti antenna and reactive magnetron sputtering of Ti target in $N_2$/Ar ambient gas mixture, the TiN films were prepared on Si substrates at different pulse bias and ion-to-atom arrival ratio ( $J_{i}$ $J_{Me}$ ). Prior to TiN film formation the nitrogen implantation was performed followed by deposition of Ti buffer layer under A $r^{+}$ irradiation. Films grown at $J_{i}$ $J_{Me}$ =0.003 and $V_{pulse}$=-20kV showed columnar grain morphology and (200) preferred orientation while those prepared at $J_{i}$ $J_{Me}$ =0.08 and $V_{pulse}$=-5 kV had dense and eqiaxed structure with (111) and (220) main peaks. X-ray diffraction patterns revealed some amount of $Ti_{x}$ $N_{y}$ in the films. The maximum microhardness of $H_{v}$ =35 GN/ $M^2$ was at the pulse bias of -5 kV. The P $I^3$D technique was applied to enhance wear properties of commercial tools of HSS (SKH51) and WC-Co alloy (P30). The specimens were 25-kV PII nitrogen implanted to the dose 4.10$^{17}$ c $m^{-2}$ and then coated with 4-$\mu\textrm{m}$ TiN film on $Ti_{x}$ $N_{y}$ buffer layer. Wear resistance was compared by measuring weight loss under sliding test (6-mm $Al_2$ $O_3$ counter ball, 500-gf applied load). After 30000 cycles at 500 rpm the untreated P30 specimen lost 3.10$^{-4}$ g, and HSS specimens lost 9.10$^{-4}$ g after 40000 cycles while quite zero losses were demonstrated by TiN coated specimens.s.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.19 no.2
• /
• pp.22-29
• /
• 2001

To take an information of substitutent effect and thermodynamic of J-aggregate at thiacarbocyanines, association constant $K_{J}$ , free energy of association G$_{J}$ , enthalpies of J-aggregate H/suib J/ were measured by spectrophotometer according to dependence on concentration of dyes and temperature of aqueous MeOH and KCl salted-out system. With increase of concentration of dyes exhibited equilibria shift toward the aggregate. Phenyl meso substituted thiacarbycyanine, DyeIII, resulted in higher $K_{j}$ and G$_{J}$ values than DyeI and DyeII. To easily make J-aggregate of thiacarbocyanine, meso substutituene group need to be a flat structure, which will make a park as well as lain tiles.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.1
• /
• pp.132-141
• /
• 2017

The objective of this study was to determine the influence of dietary metabolic energy (ME) on blood parameters in duck under heat stress. A total of 240 meat ducks Cherry valley (Anas platyrhynchos) were assigned into four treatment groups with a randomized block design for 42 days. The four treatments were: ME 2900 kcal/kg, ME 3000 kcal/kg, ME 3100 kcal/kg, and ME 3200 kcal/kg. Blood lipid profiles was higher in ME 2900 but lower in ME 3100 and ME 3200 than that of ME 3000 (p < 0.05). Blood aspartate aminotransferase (AST) and alanine aminotransferase (ALT) levels were higher in ME 3100 and ME 3200 compared those in ME 3000 (p < 0.05). The blood red cell and platelet profiles were increased in ME 3100 and ME 3200, but reduced in ME 2900 compared to those in ME 3000 (p < 0.05). Among blood electrolytes, chloride ($Cl^-$) concentration was decreased in ME 2900 compared to that in ME 3000. Blood gas $PCO_2$ was reduced in ME 2900 compared to that in ME 3000 (p < 0.05). Blood immunoglobulin (IgG) level was reduced in ME 2900 compared to that in ME 3000 (p < 0.05). Level of stress hormone, corticosterone was increased in ME 2900, but decreased in ME 3100 and ME 3200 compared to that in ME 3000 (p < 0.05).

• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2002.11a
• /
• pp.130-132
• /
• 2002

This experiment was conducted to investigate the influence of different dietary ME and CP on post-molt performance of spent laying hens. Four hundred and thirty two, ISA brown after molt induction were fed 6 experimental diets containing 3 ME(2,750, 2,800, 2,850 kcal/kg) and 2 CP(15, 17%) levels in factorial design. The influence of ME and CP were measured on body weight, egg production, egg weight and feed intake throughout 24 weeks of production. Egg mass and FCR were calculated for the entire experimental period body weight remained less in hens receiving 2,800 kcal/kg. ME and showed the highest egg Production coupled with 15% CP. Feed intake decreased with the increasing level of ME and CP. As the results of this experiment, 2,800 kcal/kg ME can be used to maintain the low body weight and to obtain higher egg production with 15% CP in induced molting hens.