• International Journal of Industrial Entomology and Biomaterials
• /
• 제20권1호
• /
• pp.1-5
• /
• 2010

The studies have been conducted to control the soil borne fungal pathogens viz, Fusarium solani (Mart) Sacc. and Alternaria tenuissima the incitants of root rot and die-back diseases on mulberry stem cuttings planted in the mulberry nurseries and also in established mulberry gardens ten plant extracts with 10% concentration except Lantana camara (undiluted) were tested through poisoned food technique and four biofungicides were also screened by dual culture method under in vitro conditions. Plant extract of Prosopis juliflora showed the maximum inhibition on the mycelial growth (81.2% over A. tenuissima and 80.0% over F. solani) and followed by L. camara (66.7% over A. tenuissima and 68.9% over F. solani). Among the antagonists Pseudomonas fluorescens and Trichoderma viride showed maximum inhibition on the mycelial growth of both pathogenic fungi. The promising plant extracts (P. juliflora and L. camara) and antagonists (P. fluorescens and T. viride) were tested against both the pathogenic fungi under in vivo conditions along with the existing popular chemical Mancozeb. All the tested plant products and bio-fungicides showed inhibitory effect on both fungi. But the maximum survival percentage of mulberry cuttings was recorded in the treatment with T. viride (95% against F. solani and 90% against A. tenuisssima) followed by P. fluorescens (90% against both fungi) and T. harzianum (80% against F. solani and 85% against A. tenuisssima). Incase of the treatments with plant extracts and chemical fungicide the P. juliflora (60% against F. solani and 55% against A. tenuisssima) showed higher survival percentage and followed by L. camara (55% against F. solani and 50% against A. tenuisssima) and Mancozeb (55% against both fungi). In case of control only 10% of survival was recorded in F. solani inoculated cuttings and 15% survival in A. tenuissima inoculated cuttings.

• Radiation Oncology Journal
• /
• 제32권3호
• /
• pp.179-186
• /
• 2014

Purpose: To study the long-term outcomes and tolerance in our patients who received dose escalated radiotherapy in the early salvage post-prostatectomy setting. Materials and Methods: The medical records of 54 consecutive patients who underwent radical prostatectomy subsequently followed by salvage radiation therapy (SRT) to the prostate bed between 2003-2010 were analyzed. Patients included were required to have a pre-radiation prostate specific antigen level (PSA) of 2 ng/mL or less. The median SRT dose was 70.2 Gy. Biochemical failure after salvage radiation was defined as a PSA level >0.2 ng/mL. Biochemical control and survival endpoints were analyzed using the Kaplan-Meier method. Univariate and multivariate Cox regression analysis were used to identify the potential impact of confounding factors on outcomes. Results: The median pre-SRT PSA was 0.45 ng/mL and the median follow-up time was 71 months. The 4- and 7-year actuarial biochemical control rates were 75.7% and 63.2%, respectively. The actuarial 4- and 7-year distant metastasis-free survival was 93.7% and 87.0%, respectively, and the actuarial 7-year prostate cancer specific survival was 94.9%. Grade 3 late genitourinary toxicity developed in 14 patients (25.9%), while grade 4 late genitourinary toxicity developed in 2 patients (3.7%). Grade 3 late gastrointestinal toxicity developed in 1 patient (1.9%), and grade 4 late gastrointestinal toxicity developed in 1 patient (1.9%). Conclusion: In this series with long-term follow-up, early SRT provided outcomes and toxicity profiles similar to those reported from the three major randomized trials studying adjuvant radiation therapy.

• 건축역사연구
• /
• 제19권2호
• /
• pp.101-116
• /
• 2010

Jangan-sa is one of the Buddhist temples in the southeastern seaside district, which was restored directly after the termination of Japanese Invasion of Korea in 1592. Recently we could find out 4 records on the constructions of Daeoong - jeon in J angan-sa. These are written in the 12th year of Emperor Soonchi, written in the 8th year of Emperor Geonryung, written in 1947 Buddha Era and written in 1951 Buddha Era. Until the revelation of these records, the present building has been considered to be built in 1657, the 8th year of King Hyojong, based upon Kim Bang - han's "Jangan - sa Daeoong - jeon - gi". Because the gongpo of Daeoong - jeon was finished with the type of the late period of Chosun Dynasty, we doubt of the correction on it's building date, just in the year of 1657. Now we are able to examine the building date and the alteration date, based upon the actual measurement and constructional records of Daeoong - jeon. So to speak, the building destroyed in 1592, had been restored in 1658, the 9th year of King Hyojong and was reconstructed in 1744, the 20th year of King Youngjo. Afterward it was repaired on small scales in 1947 and in 1951. Though this building is considered to be lack of the completeness owing to the later alterations, it is still worthy heritage for the research on the building type at the directly after the termination of Japanese Invasion of Korea in 1592.

• Korean Chemical Engineering Research
• /
• 제48권4호
• /
• pp.483-489
• /
• 2010

본 연구에서는 화상분석(image analysis)에 기반한 소프트 센서를 설계하고, 이를 색상-질감 특성을 가진 제품의 외관품질 자동분류에 적용하였다. 색상과 질감(texture)을 동시에 가진 화상을 분석하기 위해 다중해상도 다변량 화상분석(Multiresolutional Multivariate Image Analysis, MR-MIA) 기법을 이용하였으며, 자동 분류를 위한 감독 학습법(supervised learning)으로는 Fisher의 판별분석(Fisher's discriminant analysis)을 사용하였다. 잠재변수법의 하나인 Fisher의 판별분석을 사용하였기 때문에, 제품의 외관을 서로 다른 불연속적인 부류로의 분류할 수 있을 뿐 아니라, 연속적인 외관 변화를 일관적이고 정량적으로 추정함은 물론, 외관의 특성 해석 또한 가능하였다. 이 방법은 인조대리석 제조 공정에서 중간 및 최종 제품의 외관 품질을 자동으로 분류하는 데에 성공적으로 적용되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.374-374
• /
• 2010

본 연구는 Roll-to-Roll Sputtering 장비를 사용하여 제작된 Flexible ITO electrode 필름의 방사선 검출기로의 적용가능성을 알아보기 위해 기존의 Glass ITO electrode의 전기적 특성을 비교 평가하였다. 본 연구는 Flexible ITO electrode와 Glass ITO electrode을 하부전극으로 형성하고, 최근에 X-ray 변환체로 활발히 연구되고 있는 Powder 형태의 반도체물질인 HgI2 와 PbI2를 Binder와 일정한 비율로 혼합하여 3-Rolls-Miller를 사용하여 Powder를 일정한 미세크기로 만들고, 대면적 제작이 용이한 Screen-Printing method을 이용하여 시편을 제작하였다. 제작된 필름은 하부전극의 종류에 따른 X-ray 입사 후의 전기적신호의 차이를 측정하고, HgI2와 PbI2 중 Flexible ITO electrode와 더욱 효율적으로 반응하여 기존의 Glass ITO electrode를 대체할 수 있는 전극을 발견하여 진단용 의료영상의 왜곡 현상을 제거할 수 있는 Flexible 방사선 검출기의 제작의 초석을 제공하는 연구를 목적으로 한다. SEM(Scanning Electron Microscope) 통하여 반도체 물질의 결정구조와 크기를 알아보았고, 하부 전극의 종류에 따른 전기적 신호검출을 위해 제작된 필름의 암전류(Dark current) 와 민감도(Sensitivity)를 측정한 후, SNR (Signal -to- Noise)을 계산하여 평가하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.313-313
• /
• 2010

$BiFeO_3$ (BFO), when forming a solid solution with $BaTiO_3$ (BTO), shows structural transformations over the entire compositional range, which not only gives a way to increase structural stability and electrical resistivity but also applies a means to have better ferromagnetic ordering. In this respect, we have prepared and studied 0.8 BFO-0.2 BTO thin films on Pt(111)/$TiO_2/SiO_2$/Si substrates by pulsed laser deposition. Various deposition parameters, such as deposition temperature and oxygen pressure, have been optimized to get better quality films. Based on the X-ray diffraction results, thin films were successfully deposited at the temperature of $700^{\circ}C$ and an oxygen partial pressure of 10mTorr and 330mTorr. The dielectric, ferroelectric, and magnetic properties have then been characterized. It was found that the films deposited under lower and higher oxygen pressure corresponded to lower leakage current. Magnetism measurement showed an induced ferromagnetism. The microstructures associated with the magnetic and dielectric properties of this mixed-perovskite solid solutions were observed by transmission electron microscopy, which revealed the existence of complicated ferroelectric domains, suggested that the weak spontaneous magnetization was closely associated with the decrease in the extent of rhombohedral distortion by a partial substitution of $BaTiO_3$ for $BiFeO_3$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.143-143
• /
• 2010

In this study, we demonstrate that ZnO deposited onto $SiO_2$ substrates by magnetron sputtering produces p-type ZnO at higher $O_2$ pressure and n-type ZnO at lower $O_2$ pressure. We also report the effect of hydrogen peroxide ($H_2O_2$) on the stability of undoped ZnO thin films. The films were immersed in 30% $H_2O_2$ for 1 min at $30^{\circ}C$ and annealed in $O_2$at $450^{\circ}C$. The carrier concentration, mobility. and conductivity were measured by a Hall effect measurement system. The Hall measurement results for ZnO films untreated with $H_2O_2$ but annealed in $O_2$ indicate that oxygen fraction greater than ~0.5 produces undoped p-type ZnO films, whereas oxygen fraction less than ~0.5 produces undoped n-type ZnO films. This is attributed to the fact that the oxygen vacancies ($V_o$) decrease and the oxygen interstitials ($O_i$) or zinc vacancies ($V_{Zn}$) increase with increasing oxygen atoms incorporated into ZnO films during deposition and $O_2$ post-annealing.

• Journal of Forest and Environmental Science
• /
• 제31권3호
• /
• pp.192-201
• /
• 2015

Information on plant diversity and community structure are required to chalk out necessary actions for conservation management. The present study assessed the composition and diversity of tree species in Kamalachari Natural Forest of Chittagong South Forest Division, Bangladesh, during April 2010 to November 2011. A total of 107 tree species belonging to 72 genera and 37 families were recorded, where Moraceae family was represented by maximum (11) species. Density, Basal area and volume of tree species were $418{\pm}20.09stem/ha$, $21.10{\pm}2.62m^2/ha$ and $417.4{\pm}79.8m^3/ha$ respectively. Diameter and height class distribution of tree species revealed an almost reverse J-shaped curve. Both the number of species and percentage of tree individuals were maximum in the lower DBH and height ranges. Anthropogenic disturbances like illegal tree cutting, over extraction, settlement inside forest area etc. were noticed during the study, which are supposed to cause gradual decrease of both tree species and individuals in the higher DBH and height classes. However, Artocarpus chama was found dominant showing maximum IVI followed by Schima wallichii, Aporosa wallichii, and Lithocarpus acuminata. The quantitative structure of the tree species of Kamalachari natural forest is comparable to other tree species rich tropical natural forests. The findings of the study may help in monitoring future plant population changes of the identified species and adopting species specific conservation programs in Kamalachari natural forest.

• 천문학회보
• /
• 제37권1호
• /
• pp.89.1-89.1
• /
• 2012

We have investigated a coronal jet observed near the limb on 2010 June 27 by the Hinode/X-Ray Telescope (XRT), EUV Imaging Spectrograph (EIS), and Solar Optical Telescope (SOT), and the SDO/Atmospheric Imaging Assembly (AIA), Helioseismic and Magnetic Imager (HMI), and on the disk by STEREO-A/EUVI. From EUV (AIA and EIS) and soft X-ray (XRT) images we have identified both cool and hot jets. There was a small loop eruption in Ca II images of the SOT before the jet eruption. Using high temporal and multi wavelength AIA images, we found that the hot jet preceded its associated cool jet by about 2 minutes. The cool jet showed helical-like structures during the rising period. According to the spectroscopic analysis, the jet's emission changed from blue to red shift with time, implying helical motions in the jet. The STEREO observation, which enabled us to observe the jet projected against the disk, showed that there was a dim loop associated with the jet. We have measured a propagation speed of ~800 km/s for the dimming front. This is comparable to the Alfven speed in the loop computed from a magnetic field extrapolation of the HMI photospheric field measured 5 days earlier and the loop densities obtained from EIS Fe XIV line ratios. We interpret the dimming as indicating the presence of Alfvenic waves initiated by reconnection in the upper chromosphere.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.530-533
• /
• 2010

This paper presents numerical analysis and design optimization of various turbine blade cooling techniques with three-dimensional Reynolds-averaged Navier-Stokes(RANS) analysis. The fluid flow and heat transfer have been performed using ANSYS-CFX 11.0. A fan-shaped hole for film-cooling has been carried out to improve film-cooling effectiveness with the radial basis neural network method. The injection angle of hole, lateral expansion angle of hole and ratio of length-to-diameter of the hole are chosen as design variables and spatially averaged film-cooling effectiveness is considered as an objective function which is to be maximized. The impingement jet cooling has been performed to investigate heat transfer characteristic with geometry variables. Distance between jet nozzle exit and impingement plate, inclination of nozzle and aspect ratio of nozzle hole are considered as geometry variables. The area averaged Nusselt number is evaluated each geometry variables. A rotating rectangular channel with staggered array pin-fins has been investigated to increase heat transfer performance ad to decrease friction loss using KRG modeling. Two non-dimensional variables, the ratio of the eight diameter of the pin-fins and ratio of the spacing between the pin-fins to diameter of the pin-fins selected as design variables. A rotating rectangular channel with staggered dimples on opposite walls are formulated numerically to enhance heat transfer performance. The ratio of the dimple depth and dimple diameter are selected as geometry variables.