• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2010년도 학술발표회
• /
• pp.283-287
• /
• 2010

Stochastic simulation of hydrologic data has been widely developed for several decades. However, despite the several advances made in literature still a number of limitations and problems remain. In the current study, some stochastic simulation approaches tackling some of the existing problems are discussed. The presented models are based on nonparametric techniques such as block bootstrapping, and K-nearest neighbor resampling (KNNR), and kernel density estimate (KDE). Three different types of the presented stochastic simulation models are (1) Pilot Gamma Kernel estimate with KNNR (a single site case) and (2) Enhanced Nonparametric Disaggregation with Genetic Algorithm (a disaggregation case). We applied these models to one of the most challenging and critical river basins in USA, the Colorado River. These models are embedded into the hydrological software package, Pros and cons of the models compared with existing models are presented through basic statistics and drought and storage-related statistics.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2010년도 한국우주과학회보 제19권1호
• /
• pp.28.2-28.2
• /
• 2010

영상레이더 위성으로부터 획득된 SAR 영상의 상대적/절대적 방사(radiometric) 정밀도를 만족시키기 위해서는 궤도상에서 검보정을 수행하여야 한다. 일반적으로 상대 방사 정밀도의 보정을 위해서는 아마존 일대와 같이 일정한 지표 반사도를 지니는 넓은 지역을 촬영함으로써, 지상에서 모델링된 안테나 패턴의 이상 유무를 검증한다. 절대 방사 정밀도를 결정하기 위해서는 보정계수(calibration constant)를 구해야 하는데, 이를 위해서 RCS(radar cross section) 값이 기 알려져 있는 지상의 CR(corner reflector)를 관측해야 한다. 대부분의 SAR 위성의 경우, 각 입사각별로 여러 개의 빔(beam)이 독립적으로 운용되고, 위성의 경로가 각 pass 사이 거의 일정한 간격을 가지기 때문에, 지상의 CR들에 대한 빔의 접근성이 상당히 제약을 많이 받게 된다. 즉, 개별 빔이 촬영할 수 있는 CR의 개수 및 동일 CR에 대한 촬영 빈번도가 많이 작을 수 있다는 것을 의미한다. 특히, CR이 빔폭의 중심에서 관측되어야 하는 요구사항이 추가로 반영될 경우 그 빈도수는 더욱더 영향을 받게된다. 이 연구에서는 고도 550 km, 28일의 지상반복주기(repeat ground track)를 가지는 여명 궤도(dawn-dusk orbit)를 가정하고, 각 빔별로 그 빔에 할당된 하나의 CR만을 촬영해야 된다는 조건하에, 빔 접근성의 요구사항을 최대로 만족시킬 수 있는 CR의 좌표들을 구하였다. 동시에, J2항만을 고려한 이상적 28일 지상반복궤도를 적용한 경우와 모든 중력섭동항을 적용한 최적궤도를 적용한 경우를 비교하여, 실질적 검보정 일정을 수립하였다.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2010년도 한국우주과학회보 제19권1호
• /
• pp.28.3-28.3
• /
• 2010

위성이 궤도를 운용함에 있어서 원으로 운용되는 저궤도(LEO)에서는 대기저항(Drag)에 의한 섭동 영향이 가장 크게 미친다. 이 연구에서는 대기저항 섭동에 의해 감소되는 위성의 고도를 전기추력기를 이용하여 고도를 유지할 때 이를 해석적인 측면에 대해 살펴보고 지구 관측 위성에서 많이 쓰이는 태양 동기 궤도(SSO)에 적용하여 궤도를 유지하는 방법에 대해 알아보았다. 태양활동에 의한 대기의 밀도변화를 John kennewell의 모델을 통해 예측하여 대기저항에 의해 감소되는 고도량을 구하고 위성에서 추력(thrust)을 줄 때는 Gaussian Variation of Parameters식을 이용하여 해석적인 방법으로 궤도 장반경의 증가량을 구하였다. 위성에 추력을 줄때 이심률이 증가하게 되는 문제는 구속조건으로 이심률 값의 최대 허용치를 정하여 증가하는 것을 방지하도록 하였다. 또한 $J_2$ 섭동에 의해 가장 영향을 받는 승교점(Ascending Node)과 추력에 의해 변화할 수 있는 근지점(Perigee)을 살펴보고 궤도 유지를 위한 적절한 추력 방향을 구하였다. 각각의 궤도 요소의 변화를 살펴보고 일반적인 태양 동기 궤도 위성의 제원을 이용하여 궤도 유지에 적용하였다. 저궤도 위성의 궤도 유지에 대한 복잡한 수치적인 방법으로 궤도요소의 변화를 정확하게 구하지만 해석적인 방법으로도 위성의 궤도 유지를 위한 정보를 얻을 수 있었다. 이를 저궤도 위성의 궤도 운용과 변화 예측에 적용할 수 있다.

• 정보저장시스템학회논문집
• /
• 제6권2호
• /
• pp.79-82
• /
• 2010

In optical imaging systems, such as microscopes, high resolution exposure systems, and optical storage devices, higher optical resolution is a requirement. One of the promising technologies that is able to satisfy this requirement with relatively simple construction and reliable performance are, solid immersion lens (SIL)-based near-field (NF) optical systems. High NA optical systems using annular apertures have been investigated as one solution to achieve higher resolutions and an extended focal depth. By applying an optimized annular aperture to convention SIL optical head resolution can be increased by approximately 20%. This novel SIL-based near-field optics will be verified through experiments such as measuring focused beam spot profiles and observing the topology of a measurement sample. The studied SIL-based near-field optics can be applicable to not only next generation optical storage device but also high resolution microscopy and pattering technologies.

• Safety and Health at Work
• /
• 제8권4호
• /
• pp.343-346
• /
• 2017

Background: Long working hours adversely affect worker safety and health. In 2004, Korea passed legislation that limited the work week to 40 hours, in an effort to improve quality-of-life and increase business competitiveness. This regulation was implemented in stages, first for large businesses and then for small businesses, from 2004 to 2011. We previously reported that average weekly working hours decreased from 2006 to 2010, based on the Korean Working Conditions Survey. Methods: In the present study, we examine whether average weekly working hours continued to decrease in 2014 based on the 2014 Korean Working Conditions Survey. Results: The results show that average weekly working hours among all groups of workers decreased in 2014 relative to previous years; however, self-employed individuals and employers (who are not covered by the new legislation) in the specific service sectors worked > 60 h/wk in 2014. Conclusion: The Korean government should prohibit employees from working excessive hours and should also attempt to achieve social and public consensus regarding work time reduction to improve the safety, health, and quality-of-life of all citizens, including those who are employers and self-employed.

• Safety and Health at Work
• /
• 제9권3호
• /
• pp.347-351
• /
• 2018

Background: The success of an injury intervention program can be measured by the proportion of successful return to work (RTW). This study examined factors of successful return to employment among workers suffering from work-related injuries. Methods: Data were obtained from the Social Security Organization, Malaysia database consisting of 10,049 RTW program participants in 2010-2014. The dependent variable was the RTW outcome which consisted of RTW with same employer, RTW with new employer or unsuccessful return. Multinomial logistic regression was performed to test the likelihood of successful return with same employer and new employer against unsuccessful return. Results: Overall, 65.3% of injured workers were successfully returned to employment, 52.8% to the same employer and 12.5% to new employer. Employer interest; motivation; age 30-49 years; intervention less than 9 months; occupational disease; injuries in the lower limbs, upper limbs, and general injuries; and working in the manufacturing, services, and electrical/electronics were associated with returning to work with the same employer against unsuccessful return. Male, employer interest, motivation, age 49 years or younger, intervention less than 6 months, occupational disease, injuries in the upper limbs and services sector of employment were associated with returning to new employer against unsuccessful return. Conclusion: There is a need to strengthen employer commitment for early and intensified intervention that will lead to improvement in the RTW outcome.

• Nuclear Engineering and Technology
• /
• 제50권2호
• /
• pp.280-291
• /
• 2018

In the framework of OECD/NEA Working Group on Fuel Safety, a RIA fuel-rod-code Benchmark Phase I was organized in 2010-2013. It consisted of four experiments on highly irradiated fuel rodlets tested under different experimental conditions. This benchmark revealed the need to better understand the basic models incorporated in each code for realistic simulation of the complicated integral RIA tests with high burnup fuel rods. A second phase of the benchmark (Phase II) was thus launched early in 2014, which has been organized in two complementary activities: (1) comparison of the results of different simulations on simplified cases in order to provide additional bases for understanding the differences in modelling of the concerned phenomena; (2) assessment of the uncertainty of the results. The present paper provides a summary and conclusions of the second activity of the Benchmark Phase II, which is based on the input uncertainty propagation methodology. The main conclusion is that uncertainties cannot fully explain the difference between the code predictions. Finally, based on the RIA benchmark Phase-I and Phase-II conclusions, some recommendations are made.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.392-392
• /
• 2010

In this study, high-speed chemical dry thinning process of Si wafer and evolution of surface roughness were investigated. Direct injection of NO gas into the reactor during the supply of F radicals from $NF_3$ remote plasmas was very effective in increasing the Si thinning rate due to the NO-induced enhancement of surface reaction but thinned Si surface became roughened significantly. Addition of Ar gas, together with NO gas, decreased root mean square (RMS) surface roughness of thinned Si wafer significantly. The process regime for the thinning rate enhancement with reduced surface roughness was extended at higher Ar gas flow rate. Si wafer thinning rate as high as $22.8\;{\mu}m/min$ and root-mean-squared (RMS) surface roughness as small as 0.75 nm could be obtained. It is expected that high-speed chemical dry thinning process has possibility of application to ultra-thin Si wafer thinning with no mechanical damage.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.53-53
• /
• 2010

Car industry has required light-weight steels, but still with strong mechanical strength. To meet this requirement, a variety of researches on Fe-Al alloys have been performed. As Al is being added in a disordered manner, alloys become more ductile and show higher yield stress. At a certain concentration of Al, however, the Fe-Al alloy system falls in a second phase whose mechanical strength is worsened. To understand the microscopic role of Al, we investigate the stability and the elastic properties of various Fe-Al alloys using ab initio density functional theory. At agiven Al concentration, the equilibrium geometry is obtained among several disordered Fe-Al alloy structures by performing the geometry relaxation. The formation energies and elastic properties such as bulk moduli of the equilibrium structures are also computed as a function of Al concentration. We also investigate the effects of different elements such as Si and Mn. Fe-Si alloy systems exhibit unusual mechanical behaviors requiring further investigation to understand their physical origin. Especially, the microscopic role of Mn is investigated to find its physical origin of preventing the Fe-Al alloy system from forming an unfavorable second phase. The effect of manganese on mechanical properties of Fe-based alloys is also explored.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.386-386
• /
• 2010

최근 널리 보급되고 있는 치과용 임플란트는 티타늄(Ti) 또는 티타늄 합금(Ti-6Al-4V) 보철과 크라운을 연결하여 사용하고 있다. 티타늄은 생체 친화성이 우수하나, 생체 활성도가 없어 치유기간이 긴 단점이 있다. 이를 보완하기 위해 인체 경조직과 유사한 수산화아파타이트(hydroxyapatite, $Ca_{10}(PO_4)_6(OH)_2)$를 티타늄 임플란트 표면에 코팅하는 방법이 연구되고 있으나 수산화아파타이트 코팅은 티타늄과의 접착성이 나쁘기 때문에 시술 및 사용과정에서 코팅층이 임플란트로부터 박리되는 문제점이 있다. 본 연구에서는 티타늄과 수산화아파타이트 사이에서 접착력을 향상시키는 buffer layer로서 지르코니아(8YSZ, 8mol% Yttria-stabilized zirconia)를 연구하였다. 지르코니아는 고온에서 안정하며, 티타늄 합금과 수산화아파타이트 사이의 반응을 방지하며, 박막밀도와 기계적 강도가 좋은 생체세라믹스이다. 지르코니아 박막을 펄스 레이저 증착법을 이용하여 증착 온도 $600^{\circ}C$, 레이저 fluence $2\;J/cm^2$에서 산소($O_2$) 분압을 바꿔 가며 증착하였다. 그 위에 수산화아파타이트 박막을 역시 펄스 레이저 증착법으로 증착하였다. Scratch test와 Pull-off test를 통해 접착력을 평가한 결과 지르코니아 buffer layer 삽입에 의해 티타늄 합금과 수산화아파타이트 사이의 접착력이 향상되었음을 확인하였다. 또한 산소분압이 박막의 특성 및 접착력에 미치는 영향을 고찰하였다.