• Journal of the Microelectronics and Packaging Society
• /
• v.17 no.3
• /
• pp.33-41
• /
• 2010

Crack propagation mechanisms of Sn-3.0Ag-0.5Cu solder were studied in strain controlled push-pull creepfatigue conditions using the fast-fast (pp) and the slow-fast (cp) strain waveforms at 313 K. Transgranular cracking was found in the pp strain waveform which led to the cycle-dominant crack propagation and intergranular cracking in the cp strain waveform that led to the time-dominant crack propagation. The time-dominant crack propagation rate was faster than the cycle-dominant crack propagation rate when compared with J-integral range which resulted from the creep damage at the crack tip in the cp strain waveform. Clear recrystallization around the crack was found in the pp and the cp strain waveforms, but the recrystallized grain size in the cp strain waveform was smaller than that in the pp strain waveform. The cycle-dominant crack propagated in the normal direction to the specimen axis macroscopically, but the time-dominant crack propagated in the shear direction which was discussed in relation with shear micro cracks formed at the crack tip.

• Korean Journal of Health Education and Promotion
• /
• v.27 no.4
• /
• pp.91-103
• /
• 2010

Objectives: This study was designed to understand the association between sociodemographic characteristics, health behaviors and channels retrieved for health information. Methods: Questionnaire survey was performed from April 2007 to May 2007 through household visiting. Sample was selected according to gender, household income, and residence district. We got 1,009 respondents and subgroups were as follows; 508 people had health insurance, 250 people were medical indigent group, and 251 people were medicaid beneficiaries. Results: People seemed to be separated into subgroups by channels used for health information. One was active and the other was passive group. Characteristics of passive group were older age, worker or inoccupation, less income, subjective poverty, lower education, loss of spouse, medical indigent or medicaid group. They usually got health information through mass media like TV and radio or medical professionals. Characteristics of active group were younger age, professional, more income, subjective affluence, higher education, single or married, and member of health insurance. They mainly got health information through printed media like newspaper or the Internet. Conclusion: We suggest to provide health information through various channels customed to individual needs and literacy. Public health stakeholders seems better to focus on people with low education, insufficient health literacy, poor health status, and short information technology.

• 대한방사선방어학회:학술대회논문집
• /
• 2010.04a
• /
• pp.94-95
• /
• 2010

The accuracy of typical dosimeters used around high energy accelerator were proved by dose rate measurements. The experimental neutron spectrum were useful for improving high energy Monte Carlo codes by validating the implemented models. In series of this joint research the experimental data will be upgrade successively. This research program is opened to experts and students in Korea, too.

• Journal of Korean Medical classics
• /
• v.23 no.1
• /
• pp.91-100
• /
• 2010

In this study, I investigated physiology and pathology of the kidney and then researched deficiency of the kidney-nourishing the Eum music therapy to apply for clinical use, because symptoms such as chronic fatigue, morbus asthenia, anxiety, dizziness, tinnitus, and amnesia are prevalent in our modern societies. These symptoms are due to deficiency of the kidney. The kidney stores vital essence and has a function to keep activities as motive power. If the kidney is abnormal in storing the essence and holding Gi, various symptoms like dizziness, tinnitus, amnesia are caused by deficiency of the kidney. In deficiency of the kidney-nourishing the Eum music therapy, Water-Gi music which can store the essence is mainly used. In case of patients with deficiency of the kidney, dizziness, tinnitus, and amnesia, we can make use of NO.3, BWV 1068, Air of J.S.Bach and Jinyangjo of Geomungo. If there are flaring-up and fidgetiness due to deficiency of vital essence, Earth-Gi music that can help the vigor of spleen and stomach should be used prior to Water-Gi music. In the concrete, Hahyeondodeuri of Yeongsanhoesang played on Geomungo can be used. The tinnitus is caused by wind-heat and fire in the gallbladder. It is good to nourish the Eum through Water-Gi music after dispelling pathogens through Jajinmori among Gayageum sanjo.

• Journal of applied mathematics & informatics
• /
• v.28 no.3_4
• /
• pp.753-762
• /
• 2010

Let K be a nonempty closed convex subset of a real Hilbert space H. Let T : K $\rightarrow$ K be a nonexpansive mapping with a nonempty fixed point set Fix(T). Let f : K $\rightarrow$ K be a contraction mapping. Let {$\alpha_n$} and {$\beta_n$} be sequences in (0, 1) such that $\lim_{x{\rightarrow}0}{\alpha}_n=0$, (0.1) $\sum_{n=0}^{\infty}\;{\alpha}_n=+{\infty}$, (0.2) 0 < a ${\leq}\;{\beta}_n\;{\leq}$ b < 1 for all $n\;{\geq}\;0$. (0.3) Then it is proved that the modified Krasnoselski-Mann iterative sequence {$x_n$} given by {$x_0\;{\in}\;K$, $y_n\;=\;{\alpha}_{n}f(x_n)+(1-\alpha_n)x_n$, $n\;{\geq}\;0$, $x_{n+1}=(1-{\beta}_n)y_n+{\beta}_nTy_n$, $n\;{\geq}\;0$, (0.4) converges strongly to a point p $\in$ Fix(T} which satisfies the variational inequality

$\leq$ 0, z $\in$ Fix(T). (0.5) This result improves and extends the corresponding results of Yao et al[Y.Yao, H. Zhou, Y. C. Liou, Strong convergence of a modified Krasnoselski-Mann iterative algorithm for non-expansive mappings, J Appl Math Com-put (2009)29:383-389.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.99-99
• /
• 2010

Recently, amorphous transparent oxide semiconductors (TOS) have been widely studied for many optoelectronic devices such as AM-OLED (active-matrix organic light emitting diodes). The TOS TFTs using a-IGZO channel layers exhibit a high electron mobility, a smooth surface, a uniform deposition at a large area, a high optical transparency, a low-temperature fabrication. In spite of many advantages of the sputtering process such as better step coverage, good uniformity over large area, small shadow effect and good adhesion, there are not enough researches about characteristics of a-IGZO thin films. In this study, therefore, we focused on the electrical properties of a-IGZO thin films as a channel layer of TFTs. TFTs with the a-IGZO channel layers and Y2O3 gate insulators were fabricated. Source and drain layers were deposited using ITO target. TFTs were deposited on unheated non-alkali glass substrates ($5cm{\times}5cm$) with a sintered ceramic IGZO disc (3 inch $\varnothing$, 5mm t), Y2O3 disc (3 inch $\varnothing$, 5mm t) and ITO disc (3 inch $\varnothing$, 5mm t) as a target by magnetron sputtering method. The O2 gas was used as the reactive gas. Deposition was carried out under various sputtering conditions to investigate the effect of sputtering process on the characteristics of a-IGZO thin films. Correlation between sputtering factors and electronic properties of the film will be discussed in detail.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.16-16
• /
• 2010

반도체 및 LCD 공정이 진행되는 진공 챔버는 유량계, 진공 펌프 및 밸브 등을 이용하여 적절한 공정용 기체와 압력을 제어하게 된다. 공정에 따라 매우 높은 온도를 유지해야 하는 경우도 있다. 챔버 내부의 압력은 유입되는 기체의 시간에 따른 유량 변화에 의하여 주기적으로 변화하게 된다. 이러한 유량 변화는 장기적으로는 결국 펌프의 신뢰성(내구수명)에 영향을 주게 되며, 특히 고유량 및 저유량을 반복하게 되는 공정에 있어서는 더욱 큰 영향을 미치게 된다. 또한 챔버 내부는 다양한 화학적 반응이 일어나며 이러한 공정 기체들의 높은 온도는 결국 챔버에 연결된 펌프의 성능 및 신뢰성에도 영향을 주게 된다. 대부분의 반도체 및 LCD 공정이 이루어지는 압력에서는 전도 및 대류의 열전달 형태보다는 열복사에 의한 영향을 받게 되어 챔버를 적절히 설계한다면 펌프에 직접적으로 전달되는 복사량은 상대적으로 낮고, 펌프에 미치는 영향도 크지 않게 된다. 그러나 압력의 변화에 따라 전도 및 대류의 영향이 커지게 되는 경우에는 펌프 자체 및 성능에 큰 영향을 주게 될 것이다. 터보형 펌프의 국내(KS) 및 국제규격(ISO)의 성능시험방법에는 이러한 온도에 따른 펌프의 성능 특성 변화를 다루고 있지 않으며, 크라이오 펌프인 경우 열복사의 영향에 대한 시험방법이 일부 공개되어 있다[J. Vac. Sci. Technol. A 17(5)]. 본 연구에서는 기체의 유량 및 온도 변화에 따른 진공 펌프의 성능 특성 변화를 고찰하고자 하며, 향후 이러한 시험방법에 대한 표준 절차를 확립하고자 한다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.72-72
• /
• 2010

Recent development of organic solar cell approaches the level of 8% power conversion efficiency by the introduction of new materials, improved material engineering, and more sophisticated device structures. As for interface engineering, various interlayer materials such as LiF, CaO, NaF, and KF have been utilized between Al electrode and active layer. Those materials lower the work function of cathode and interface barrier, protect the active layer, enhance charge collection efficiency, and induce active layer doping. However, the addition of another step of thin layer deposition could be a little complicated. Thus, on a typical solar cell structure of Al/P3HT:PCBM/PEDOT:PSS/ITO glass, we used Li:Al alloy electrode instead of Al to render a simple process. J-V measurement under dark and light illumination on the polymer solar cell using Li:Al cathode shows the improvement in electric properties such as decrease in leakage current and series resistance, and increase in circuit current density. This effective charge collection and electron transport correspond to lowered energy barrier for electron transport at the interface, which is measured by ultraviolet photoelectron spectroscopy. Indeed, through the measurement of secondary ion mass spectroscopy, the Li atoms turn out to be located mainly at the interface between polymer and Al metal. In addition, the chemical reaction between polymer and metal electrodes are measured by X-ray photoelectron spectroscopy.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.246-247
• /
• 2010

This paper deals with the water treatment of the leachate from sewage filled ground by a pulsed power technology. Leachate from sewage filled ground should be treated below regulation level of COD in order to prevent environmental pollution and usually treated by a chemical method. Among the pollutants mixed in the leachate, chemical compounds of benzene series are known to be difficult to break down, and need to use high cost treat methods. The treatment of the benzene compounds by high power pulsed power supply was studied. For the high-rate, cost-effective treatment of leachate, pulsed power supply should have high repetition rates and require switching devices of long lifetime. In order to meet the demands of the above condition, pulsed power generator based on semiconductor switches using IGBTs as primary switches were developed. The experimental results verified that benzene compounds can be treated effectively by high voltage electric pulses, and this fact indicates that the treatment method by pulsed power source is a promising substitute.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.2008-2010
• /
• 2002

Process conditions of a novel negative thick photoresist, JSR THB-$430N^{(R)}$, are established in this paper. Although SU-8 obtains uniform and high-aspect-ratio structures, it is hard to remove the SU-8 mold after electroplating. The JSR THB-$430N^{(R)}$ can be more easily removed than the SU-8 and has a low internal stress. Introducing two step strip processes using acetone and the jSR THB-$S1^{(R)}$, the JSR THB-$430N^{(R)}$ electroplating mold was removed completely and a JSR THB-$430N^{(R)}$ film stress is compressive less than 2 MPa. In this paper, we obatined $200{\mu}m$ thick PR structure and $100{\mu}m$ thick electroplated nickel structure using the JSR THB-$430N^{(R)}$ photoresist.