• Corrosion Science and Technology
• /
• 제10권2호
• /
• pp.52-59
• /
• 2011

Corrosion of metallic materials occurs by the reaction with corrosive environment such as atmosphere, marine, soil, urban, high temperature etc. In general, reduction of thickness and cracking and degradation are resulted from corrosion. Corrosion in all industrial facilities and infrastructure causes large economic losses as well as a large number of accidents. Economic loss by corrosion has been reported to be nearly 1-6% of GNP or GDP. In order to reduce corrosion damage of industrial facilities, corrosion map as well as a systematic investigation of the loss of corrosion in each industrial sector is needed. The Corrosion Science Society of Korea in collaboration with 15 universities and institutes has started to survey on the cost of corrosion and corrosion map of Korea since 2005. This work presents the results of the survey on cost of corrosion by Uhlig, Hoar, and input-output methods, and the evaluation of atmospheric corrosion rate of carbon steel, weathering steel, galvanized steel, copper, and aluminum in Korea. The total corrosion cost was estimated in terms of the percentage of the GDP of industry sectors and the total GDP of Korea. According to the result of Input/output method, corrosion cost of Korea was calculated as 2.9% to GDP (2005). Time of wetness was shown to be categories 3 to 4 in all exposure areas. A definite seasonal difference was observed in Korea. In summer and fall, time of wetness was higher than in other seasons. Because of short exposure period (12 months), significant corrosion trends depending upon materials and exposure corrosion environments were not revealed even though increased mass loss and decreased corrosion rate by exposure time.

• 천문학회보
• /
• 제37권2호
• /
• pp.141.1-141.1
• /
• 2012

CIBER (Cosmic Infrared Background ExpeRiment) is a sounding-rocket borne experiment which is designed to find the evidence of the First stars (Pop.III stars) in the universe. They are expected to be formed between the recombination era at z ~ 1100 and the most distant quasar (z ~ 8). They have never been directly detected due to its faintness so far, but can be observed as a background radiation at around $1{\mu}m$ which is called the Cosmic Near-Infrared Background (CNB). The CIBER is successfully launched on July 10, 2010 at White Sands Missile Range, New Mexico, USA. It consists of three kinds of instruments. One of them is a LRS (Low Resolution Spectrometer) which is a refractive telescope of 5.5 cm aperture with spectral resolution of 20 ~ 30 and wavelength coverage of 0.7 to $2.0{\mu}m$ to measure the spectrum of the CNB. Since LRS detects not only CNB but also stellar components, we can study their spectral features with the broad band advantage especially at around $1{\mu}m$ which is difficult at ground observations because of the atmospheric absorption by water vapor. I identified around 300 stars from observed six fields. If we can classify their spectral types with SED fitting, we can study their physical conditions of the stellar atmosphere as well as making a stellar catalogue of continuous stellar spectrum.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.435-435
• /
• 2010

A inclined slot-excited plasma source is newly designed and constructed for higher flux HNB(Hyperthermal Neutral Beam) generation. The present source is different from the vertical SLAN(SLot ANtenna) sources [1] in two aspects. One is that the slots are inclined, and the other is that the magnetic field is configured to a cusp type. These modifications are intended to make the source plasma operated in sub-milli-torr pressure regime and as thin as possible, both of which is to get higher HNB flux by decreasing the re-ionization rate of the reflected atoms from the neutralizer [2]. The plasma is generated in a quartz tube of internal diameter 170 mm enclosed in a aluminum application chamber of larger diameter 250 mm. The microwave power is fed to the plasma chamber by 8 inclined slots cut into the application chamber wall. The slots are coupled the chamber to a WR280 waveguide wound around it to form a ring resonator. In order to make two slots $\lambda_g/2$ apart in phase, the adjacent slots are rotated in opposite directions. The rotation angle of the slots are set to $60^{\circ}$ from the chamber axis. Between the quartz chamber and the aluminum cylindrical chamber 8 NdFeB magnets are equally spaced and fixed to form the cusp magnetic field confinement and ECR (Electron Cyclotron Resonance) field. In this presentation, the magnetic and electromagnetic simulations, and the measured plasma parameters are given for both the inclined and the vertical slot-excited plasma sources. We also discuss how the sources can be tailored to suit better-performing HNB sources.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.480-480
• /
• 2010

In the present work, we studied effect of the deposition parameters on the structure and properties of ZnO films deposited by DC arc plasmatron. The varied parameters were gas flow rates, precursor composition, substrate temperature and post-deposition annealing temperature. Vapor of Zinc acetylacetone was used as source materials, oxygen was used as working gas and argon was used as the cathode protective gas and a transport gas for the vapor. The plasmatron power was varied in the range of 700-1,500 watts. Flow rate of the gases and substrate temperature rate were varied in the wide range to optimize the properties of the deposited coatings. After deposition films were annealed in the hydrogen atmosphere in the wide range of temperatures. Structure of coatings was investigated using XRD and SEM. Chemical composition was analyzed using x-ray photo-electron spectroscopy. Sheet conductivity was measured by 4-point probe method. Optical properties of the transparent ZnO-based coatings were studied by the spectroscopy. It was shown that deposition by a DC Arc plasmatron can be used for low-cost production of zinc oxide films with good optical and electrical properties. Sheet resistance of 4 Ohms cm was achieved after the deposition and 30 min annealing in the hydrogen at $350^{\circ}C$. Elevation of the substrate temperature during the deposition process up to $350^{\circ}C$ leads to decreasing of the film's resistance due to rearrangement of the crystalline structure.

• Coupled systems mechanics
• /
• 제8권1호
• /
• pp.71-93
• /
• 2019

Finite element simulations of solid mechanics problems often involve the use of Non-Confirming Meshes (NCM) to increase accuracy in capturing nonlinear behavior, including damage and plasticity, in part of a solid domain without an undue increase in computational costs. In the presence of material nonlinearity and plasticity, higher-order variables are often needed to capture nonlinear behavior and material history on non-conforming interfaces. The most popular formulations for coupling non-conforming meshes are dual methods that involve the interpolation of a traction field on the interface. These methods are subject to the Ladyzhenskaya-Babuska-Brezzi (LBB) stability condition, and are therefore limited in their implementation with the higher-order elements needed to capture nonlinear material behavior. Alternatively, the enriched discontinuous Galerkin approach (EDGA) (Haikal and Hjelmstad 2010) is a primal method that provides higher order kinematic fields on the interface, and in which interface tractions are computed from local finite element estimates, therefore facilitating its implementation with nonlinear material models. The inclusion of higher-order interface variables, however, presents the issue of preserving material history at integration points when a increase in integration order is needed. In this study, the enriched discontinuous Galerkin approach (EDGA) is extended to the case of small-deformation plasticity. An interface-driven Gauss-Kronrod integration rule is proposed to enable adaptive enrichment on the interface while preserving history-dependent material data at existing integration points. The method is implemented using classical J2 plasticity theory as well as the pressure-dependent Drucker-Prager material model. We show that an efficient treatment of interface variables can improve algorithmic performance and provide a consistent approach for coupling non-conforming meshes in inelasticity.

• 영어영문학
• /
• 제56권6호
• /
• pp.1255-1279
• /
• 2010

Much has already been learned about what goes on in the minds of second language writers as they compose, yet, oddly enough, until recently little in the L2 research literature has addressed writing and mental imagery together. However, images and imaging (visual thinking) play a crucial role in perception (the basis of mental imagery), in turn, affecting language, thinking, and writing. Many theorists of mental imagery also agree that more than just language accounts for how we think and that imagery is at least as crucial as language. All of these demands, to be sure, are compounded for EFL students, which is why I investigate EFL students' writing process, focusing on the use of mental imagery and its relationship to the writing. First I speculate upon some ways that imagery influences EFL students' composing processes and products. Next, I want to explore how and whether the images in a writer's mind can be shaped effectively into a linear piece of written English in one's writing. I studied two university undergraduate EFL students, L and J. They had fairly advanced levels of English proficiency and exhibited high level of writing ability, as measured by TOEFL iBT Test. Each student wrote two comparison and contrast essays: one written under specified time limitations and the other written without the pressure of time. In order to investigate whether the amount of time in itself causes differences within an individual in imagery ability, the students were placed under strict time constraints for Topic 1. But for Topic 2, they were encouraged to take as much time as necessary to complete this essay. Immediately after completing their essays, I conducted face-to-face retrospective interviews with students to prompt them for information about the role of imagery as they write. Both L and J have spent more time on their second (untimed) essays. Without time constraint, they produced longer texts on untimed essay (149 vs. 170; 186 vs 284 words). However, despite a relatively long period of time spent writing an essay, these students neither described their images nor detailed them in their essays. Although their mental imagery generated an explosion of ideas for their writings, most visual thinking must merely be a means toward an end-pictures that writers spent in purchasing the right words or ideas.

• Asian-Australasian Journal of Animal Sciences
• /
• 제23권4호
• /
• pp.521-529
• /
• 2010

Two experiments were conducted to evaluate multi-microbe submerged liquid (SLF) and solid substrate (SSF) fermented probiotic products in broilers. The SLF and SSF probiotics were comprised of Lactobacillus acidophilus ($1.1{\times}10^9$ and $4{\times}10^8$ cfu/g), Bacillus subtilis ($1.1{\times}10^9$ and $4{\times}10^9$ cfu/g), Saccharomyces cerevisiae ($1.5{\times}10^7$ and $1.0{\times}10^4$ cfu/g) and Aspergillus oryzae ($2.6{\times}10^7$ and $4.3{\times}10^7$ cfu/g), respectively. In Exp. 1, 640 day-old Ross chicks were allotted to 4 treatments, each comprising 4 replicates (40 chicks/replicate). The basal diet was prepared without any antimicrobials (negative control, NC), and 20 mg/kg avilamycin (positive control, PC), 0.3% SLF and 0.3% SSF probiotics were added to the basal diets as treatments. Birds fed PC and SSF diets showed improved (p<0.001) overall weight gain and F/G than birds fed NC and SLF diets; whereas, birds fed SLF diet had better weight gain and F/G than birds fed NC diet. Retention of CP was higher (p<0.05) in birds fed the SSF diet than birds fed PC, SLF and NC diets. Birds fed the SLF diet tended to have higher (p<0.10) cecal total anaerobic bacteria than birds fed PC and NC diets; whereas, lesser cecal coliforms were noticed in birds fed PC, SLF and SSF diets than birds fed the NC diet. In Exp. 2, 640 day-old Ross chicks were randomly allotted to 4 treatments in a $2{\times}2$ factorial arrangement. Each treatment had 4 replicates (40 chicks/replicate). Two different multi-microbe probiotic products (0.3% SLF or SSF) each with two different antibiotics (10 mg/kg colistin, or 20 mg/kg avilamycin) were used as dietary treatments. Birds fed the SSF diet had greater weight gain (p<0.001), better F/G (p<0.05), greater retention of energy (p<0.001) and protein (p<0.05), and lesser cecal Clostridium (d 35) than birds fed SLF diet. Birds fed the colistin-supplemented diet had less (p<0.01) cecal coliforms when compared with birds fed the avilamycin diet. Additionally, birds fed the avilamycin diet had greater energy retention (p<0.05) than birds fed the colistin diet. Thus, the results of this study suggest the multi-microbe probiotic product prepared by a solid substrate fermentation method to be superior to the probiotic product prepared by submerged liquid fermentation; moreover, feeding of probiotics with different antibiotics did not elicit any interaction effect between probiotic and antibiotic.

• 한국산학기술학회논문지
• /
• 제11권12호
• /
• pp.4863-4872
• /
• 2010

본 연구는 농 어촌지역 환자들을 대상으로 질병양상을 살펴보고 의료이용 실태를 분석하여 농 어촌지역 의료 관련 기관의 보건의료서비스 계획수립에 필요한 자료를 제공 하고자 시행되었다. 노령화가 진행된 농 어촌지역 G도 G군에 소재한 종합병원을 대상으로 2009년 7월부터 12월까지 6개월 동안 퇴원환자 2,365건 전수의 의무기록 자료를 토대로 분석하였다. 분석결과, 조사대상 환자의 성별은 남자 55.3%, 여자 44.7%, 연령별은 70세 이상 후기 고령자가 42%로 나타냈다. 입원유형별로는 외래경유 입원환자가 65.5%이며, 진료과목으로는 내과 49.7%, 정형외과 16.7%, 신경외과 13.8% 순이었다. 주 진단명(3단 분류)별 10대 다 빈도에서 S00-T98 18.4%, J00-J99 15.5%, I00-I99 11.5% 순이었다. 평균재원일수는 14.8일이었으며, 주 진단명을 포함한 상병개수는 평균 5.6개이었다. 주 진단명(3단 분류) 다빈도 10대에서 성별, 보험유형별, 입원경로, 연령별 분포 등이 통계적으로 유의한 차이가 있었다. 월별 주 진단명(3단 분류) 다 빈도 10대 분류 분포는 통계적 유의한 차이가 있었다. 주 진단명(3단 분류) 다 빈도 10대분류에 따른 평균재원일수와 상병개수는 통계적으로 유의한 차이가 있었다. 결론적으로, 농 어촌지역의 질병분포는 작업환경과 연중 신체적 무리가 가는 노동행위에 따른 외상성 질환 및 호흡기 질환과 노령화에 따른 각종 만성질환 등 이었다.

• Wind and Structures
• /
• 제13권1호
• /
• pp.57-82
• /
• 2010

The 486m-long roof of Shenzhen Citizens Centre is one of the world's longest spatial lattice roof structures. A comprehensive numerical study of wind effects on the long-span structure is presented in this paper. The discretizing and synthesizing of random flow generation technique (DSRFG) recently proposed by two of the authors (Huang and Li 2008) was adopted to produce a spatially correlated turbulent inflow field for the simulation study. The distributions and characteristics of wind loads on the roof were numerically evaluated by Computational Fluid Dynamics (CFD) methods, in which Large Eddy Simulation (LES) and Reynolds Averaged Navier-Stokes Equations (RANS) Model were employed. The main objective of this study is to explore a useful approach for estimations of wind effects on complex curved roof by CFD techniques. In parallel with the numerical investigation, simultaneous pressure measurements on the entire roof were made in a boundary layer wind tunnel to determine mean, fluctuating and peak pressure coefficient distributions, and spectra, spatial correlation coefficients and probability characteristics of pressure fluctuations. Numerical results were then compared with these experimentally determined data for validating the numerical methods. The comparative study demonstrated that the LES integrated with the DSRFG technique could provide satisfactory prediction of wind effects on the long-span roof with complex shape, especially on separation zones along leading eaves where the worst negative wind-induced pressures commonly occur. The recommended LES and inflow turbulence generation technique as well as associated numerical treatments are useful for structural engineers to assess wind effects on a long-span roof at its design stage.

• Asian-Australasian Journal of Animal Sciences
• /
• 제23권3호
• /
• pp.396-400
• /
• 2010

This experiment investigated the effects of increasing dietary vitamin E (VE) on production performance and egg quality traits of Indian reared Kadaknath (KN) hens. One hundred and eighty (180), day old female KN chicks were randomly distributed to three dietary treatment groups for a period of 30 weeks. Each treatment comprised three replicates, each containing 20 chicks. The basal diet ($T_1$) contained 15 IU VE/kg and the two experimental diets were supplemented with 150 and 300 IU VE/kg (diets $T_2$ and $T_3$, respectively). DL-${\alpha}$-tocopherol acetate was used as the source of VE. All chicks were provided feed and water ad libitum. Production performance in terms of body weight, egg weight and hatchability did not differ significantly (p>0.05), whereas sexual maturity, egg production and fertility differed significantly (p<0.05) in $T_2$ compared to the other two groups. Egg quality traits in terms of albumin weight, yolk weight, shell thickness, albumin index and yolk index did not differ significantly (p>0.05), whereas the Haugh unit score was significantly higher (p<0.05) in $T_2$ than the control ($T_1$) and high dose treatment group ($T_3$). From this study, it can be concluded that lower levels of dietary VE may be beneficial for production performance and Haugh unit score but have no effect on egg quality traits in Indian reared KN hens.