• Nuclear Engineering and Technology
• /
• v.56 no.7
• /
• pp.2595-2609
• /
• 2024

This paper introduces a base isolation system-tuned mass damper inerter (BIS-TMDI) hybrid system to the AP1000 nuclear power plant (NPP), which reduces seismic damage potential of the NPP structure. The effects of fluid-structure interaction (FSI) caused by the passive containment cooling system water storage tank (PCCWST) on NPP's seismic performance are investigated. The FSI of water tank theoretical model is considered based on the Housner's model, and a series of time history analyses are performed to prove the rationality of the proposed model. Three single-objective optimization strategies are employed to minimize the relative displacement variance and absolute acceleration variance of the upper structure, as well as the filtered energy index (FEI). Furthermore, a multi-objective optimization strategy considering all these three indexes is proposed to obtain optimal parameters of vibration control. The influence of vibration control strategies on the relative deformation and acceleration of the upper structure is explored with various water level ratios. The analytical results indicate that the proposed BIS-TMDI strategy has significantly reduced the NPP structure's seismic response. The effectiveness of the vibration control strategy is influenced by the water level ratio, emphasizing the significance of designing an appropriate water level ratio to reduce NPP structure's seismic response.

• Safety and Health at Work
• /
• v.15 no.3
• /
• pp.284-291
• /
• 2024

Background: This study aimed to identify the prevalence of workplace hazards and organizational protection resources according to the size of the enterprise in the manufacturing industry of the Republic of Korea. Methods: We analyzed data of waged workers (weighted N = 5,879) from the Fifth Korean Working Conditions Survey (2017). Enterprise sizes were categorized as "micro enterprises" (less than five employees), "small enterprises" (5-49 employees) and "medium-large enterprises" (50 or more employees). Self-reported exposure to 18 physical, chemical, ergonomic, and psychological hazards were measured. The presence of organizational protection resources such as a labor union, a safety delegate working at the company, designated spaces to deal with safety, and the provision of health and safety information was evaluated. Results: Compared to workers in medium-large enterprises, those in micro enterprises showed a higher proportion of exposure to most of physical, chemical, ergonomic, and psychological hazards, except for exposure to solvents, prolonged sitting, and experiencing a state of emotional unrest. On the other hand, workers in micro enterprises had the lowest proportion of access to organizational protection resources. Conclusion: Our study demonstrates that manufacturing workers at the micro enterprise in the Republic of Korea are exposed to the most hazardous work environment and yet have access to the fewest organizational protection resources.

• Nuclear Engineering and Technology
• /
• v.56 no.8
• /
• pp.3286-3297
• /
• 2024

Traditional text-based system engineering, which has been used in the design and application of passive residual heat removal system (PRHRS) for lead-cooled fast reactors, is prone to several problems such as low development efficiency, long iteration cycles, and model ambiguity. This study aims to effectively address the abovementioned problems by adopting a model-based system engineering (MBSE) method, which has been preliminarily applied to meet the design requirements of a PRHRS. The design process has been implemented based on the preliminary design of the system architecture and consists of three stages: top-level requirement analysis, functional requirements analysis, and design requirements synthesis. The results of the top-level requirements analysis and the corresponding use case diagram can determine the requirements, top-level use cases, and scenario flow of the system. During the functional requirements analysis, the sequence, activity, and state machine diagrams are used to develop the system function model and provide early confirmation. By comparing these sequence diagrams, the requirements for omissions and inconsistencies can be effectively checked. In the design requirements synthesis stage, the Analytic Hierarchy Process is used to conduct preliminary trade-off calculations on the system architecture, after which a white box model is established during the system architecture design. Through these two steps, the analysis and design of the system architecture are ultimately achieved. The resulting system architecture ensures the consistency of the design requirements. Ultimately, a functional hazard analysis was conducted for a specific incident to validate case requirements and further refine the system architecture. Future research can further reduce the design risk, improve the design efficiency, and provide a practical reference for the design and optimization of PRHRS in digital lead-cooled fast reactors.

• Journal of Climate Change Research
• /
• v.34 no.8
• /
• pp.3103-3127
• /
• 2021

Wind gusts represent one of the main natural hazards due to their increasing socioeconomic and environmental impacts on, for example, human safety, maritime-terrestrial-aviation activities, engineering and insurance applications, and energy production. However, the existing scientific studies focused on observed wind gusts are relatively few compared to those on mean wind speed. In Australia, previous studies found a slowdown of near-surface mean wind speed, termed "stilling," but a lack of knowledge on the multidecadal variability and trends in the magnitude (wind speed maxima) and frequency (exceeding the 90th percentile) of wind gusts exists. A new homogenized daily peak wind gusts (DPWG) dataset containing 548 time series across Australia for 1941-2016 is analyzed to determine long-term trends in wind gusts. Here we show that both the magnitude and frequency of DPWG declined across much of the continent, with a distinct seasonality: negative trends in summer-pring-autumn and weak negative or nontrending (even positive) trends in winter. We demonstrate that ocean-atmosphere oscillations such as the Indian Ocean dipole and the southern annular mode partly modulate decadal-scale variations of DPWG. The long-term declining trend of DPWG is consistent with the "stilling" phenomenon, suggesting that global warming may have reduced Australian wind gusts.

• Journal of Rhinology
• /
• v.59 no.3
• /
• pp.292-300
• /
• 2021

Background: Chronic rhinosinusitis (CRS) and chronic otitis media (COM) share pathophysiological mechanisms such as bacterial infection, biofilm, and persistence of the obstruction state of ventilation routes. However, only a few studies have investigated the relationship between these two diseases nationwide and in the general population. The purpose of this study was to determine whether the incidence of COM in patients with CRS differed from that of a matched control from the national health screening cohort. Methods: Data from the Korean Health Insurance Review and Assessment Service-National Patient Samples were collected from 2002 to 2015. Participants who were treated ≥2 times and underwent head and neck computed tomography evaluation were selected. A 1:4 matched CRS group (n=8,057) and a control group (n=32,228) were selected. The control group included participants who were never treated with the ICD-10 code J32 from 2002 to 2015. The CRS group included CRS patients with/without nasal polyps. Results: The incidence of COM was significantly higher in the CRS group than in the control group. In a subgroup analysis, the incidence of COM in all age groups and in men and women was significantly higher in the CRS group than in the control group. More, CRS increased the risk of COM. Conclusions: A significant association was observed between CRS and COM. This indicates that CRS patients have a high risk of developing COM.

• Nuclear Engineering and Technology
• /
• v.56 no.10
• /
• pp.4068-4076
• /
• 2024

In the event of severe accidents in pressurized water reactor (PWR) nuclear power plants, the potential leakage of radioactive aerosols through containment cracks poses a considerable radioactive hazard to the public. Understanding aerosol transport and retention in cracks helps reduce the conservatism and uncertainty of radioactive hazard assessment. Concrete cracks are recognized as a pivotal pathway for the leakage of radioactive aerosols, and several researchers have undertaken experimental investigations concerning the aerosol transport and retention in concrete cracks. However, the majority of these studies have rather low gas flow Reynolds numbers. In this work, an experimental setup is built to study aerosol transport and retention in concrete cracks under high Reynolds number flow. The TiO₂ aerosol with a mass median diameter of 1 ㎛ and two concrete crack specimens are used in experiments. The results of gas flow experiments indicate that the Reynolds number is capable of reaching 10547. Combining the flow experimental data and Suzuki's formula, the equivalent heights of these two crack specimens are approximated as 303.67 ㎛ and 231.48 ㎛. The experimental results indicate a notably high retention rate of aerosols, exceeding 0.8. Furthermore, under high Reynolds number flow, the retention rate varies over a relatively narrow range, with the larger the equivalent height of the crack resulting in a lower retention rate. The experimental results match well with the mechanistic analysis based on inertial deposition theory, demonstrating the rationality of the inertial deposition theory.

• The Korean Journal of Pesticide Science
• /
• v.5 no.3
• /
• pp.1-11
• /
• 2001

New technologies will have a large impact on the discovery of new herbicide site of action. Genomics, combinatorial chemistry, and bioinformatics help take advantage of serendipity through tile sequencing of huge numbers of genes or the synthesis of large numbers of chemical compounds. There are approximately $10^{30}\;to\;10^{50}$ possible molecules in molecular space of which only a fraction have been synthesized. Combining this potential with having access to 50,000 plant genes in the future elevates tile probability of discovering flew herbicidal site of actions. If 0.1, 1.0 or 10% of total genes in a typical plant are valid for herbicide target, a plant with 50,000 genes would provide about 50, 500, and 5,000 targets, respectively. However, only 11 herbicide targets have been identified and commercialized. The successful design of novel herbicides depends on careful consideration of a number of factors including target enzyme selections and validations, inhibitor designs, and the metabolic fates. Biochemical information can be used to identify enzymes which produce lethal phenotypes. The identification of a lethal target site is an important step to this approach. An examination of the characteristics of known targets provides of crucial insight as to the definition of a lethal target. Recently, antisense RNA suppression of an enzyme translation has been used to determine the genes required for toxicity and offers a strategy for identifying lethal target sites. After the identification of a lethal target, detailed knowledge such as the enzyme kinetics and the protein structure may be used to design potent inhibitors. Various types of inhibitors may be designed for a given enzyme. Strategies for the selection of new enzyme targets giving the desired physiological response upon partial inhibition include identification of chemical leads, lethal mutants and the use of antisense technology. Enzyme inhibitors having agrochemical utility can be categorized into six major groups: ground-state analogues, group specific reagents, affinity labels, suicide substrates, reaction intermediate analogues, and extraneous site inhibitors. In this review, examples of each category, and their advantages and disadvantages, will be discussed. The target identification and construction of a potent inhibitor, in itself, may not lead to develop an effective herbicide. The desired in vivo activity, uptake and translocation, and metabolism of the inhibitor should be studied in detail to assess the full potential of the target. Strategies for delivery of the compound to the target enzyme and avoidance of premature detoxification may include a proherbicidal approach, especially when inhibitors are highly charged or when selective detoxification or activation can be exploited. Utilization of differences in detoxification or activation between weeds and crops may lead to enhance selectivity. Without a full appreciation of each of these facets of herbicide design, the chances for success with the target or enzyme-driven approach are reduced.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.11
• /
• pp.1584-1592
• /
• 2000

Three hundred nursery pigs were used in two growth assays (avg initial BW of 6.5 and 6.0 kg, respectively) to determine the effects of sodium sulfite ($Na_2SO_3$) as an extrusion aid for soy products used in diets for weanling pigs. In Exp. 1, treatments were arranged as $3{\times}2$ factorial with main effects of soy product [soybean meal (SBM), extruded SBM, and dry-extruded whole soybeans (DEWS)] and concentration of $Na_2SO_3$ (0 and 10 g/kg of soy product). The extruded SBM and DEWS treatments were processed in a dry extruder ($Insta-Pro^{(R)} $, Triple F Nutrition, Des Moines, IA) with barrel temperatures and throughputs of $169^{\circ}C$ and 578 kg/h, and $147^{\circ}C$ and 598 kg/h, respectively. All diets were formulated to 3.5 Mcal/kg DE, with 0.92% lysine for d 0 to 14, and 0.76% lysine for d 14 to 28. For d 0 to 14, there was a tendency for pigs fed diets with $Na_2SO_3$ to have greater ADG (p<0.08), and pigs fed SBM to have greater ADFI (p<0.02), thus pigs fed the extruded soy products has 15% greater gain/feed than those fed SBM (p<0.007). For d 14 to 28, there were no differences in ADG or gain/feed among pigs fed diets with SBM and those fed diets with the extruded soy products (p>0.15). However, pigs fed DEWS had greater ADG than pigs fed extruded SBM, and pigs fed $Na_2SO_3$ had greater ADG and ADFI compared to those not fed $Na_2SO_3$ (p<0.02 and 0.08, respectively). The positive response in ADG and gain/feed to the addition of $Na_2SO_3$ resulted with SBM and extruded SBM treatments, and not with DEWS (interaction effect, p<0.04). Overall (d 0 to 28), pigs fed DEWS had greater ADG (p<0.01) and gain/feed (p<0.08) than pigs fed extruded SBM. Also pigs fed diets with $Na_2SO_3$ had greater ADG, ADFI, and gain/feed compared to those fed diets without $Na_2SO_3$ (p<0.002, 0.04, and 0.04, respectively). Exp. 2 was designed as a $2{\times}3$ factorial with main effects of soy product (SBM and DEWS) and concentration of $Na_2SO_3$ (none, 7.5, and 15.0 g/kg of soy product). As in Exp. 1, all diets were formulated to 3.5 Mcal/kg DE, with 0.92% lysine for d 0 to 13, and 0.76% lysine for d 13 to 53. At a constant processing temperature (148 to $149^{\circ}C$, $Na_2SO_3$ increased throughput of the extruder (578, 595, and 602 kg/h for the 0, 7.5, and 15.0 g/kg additions, respectively). For d 0 to 13, treatment had no effect on ADG or ADFI, but gain/feed decreased for pigs fed SBM with increasing concentrations of $Na_2SO_3$, and increased for pigs fed DEWS with increasing concentrations of $Na_2SO_3$ (SBM vs DEWS sulfite quadratic interaction, p<0.03). For d 13 to 35, pigs fed DEWS had greater ADG (p<0.01) and gain/feed (p<0.001) than pigs fed SBM. Also, ADFI decreased and gain/feed increased with increasing concentrations of $Na_2SO_3$ (linear effects, p<0.04 and 0.01, respectively). Overall, pigs fed the diets with DEWS had greater ADG and gain/feed than pigs fed SBM (p<0.003 and 0.002, respectively), and $Na_2SO_3$ tended to decrease ADFI and increase gain/feed (linear effects, p<0.07 and 0.06, respectively). In conclusion, pigs fed DEWS had greater rate and efficiency of gain than pigs fed SBM. Also, adding $Na_2SO_3$ prior to extrusion increased yield and feed efficiency.

• Journal of the Korean Magnetics Society
• /
• v.18 no.3
• /
• pp.109-114
• /
• 2008

The samples were synthesized by using a solid state reaction. The X-ray diffraction pattern for $Ti_{0.96}Co_{0.02}Fe_{0.02}O_2$ showed a pure rutile phase with tetragonal structure, Mixtures of the proper proportions of the elements sealed in evacuated quartz ampoule were heated at $870{\sim}930^{\circ}C$ for one day and then slowly cooled down to room temperature at a rate of $10^{\circ}C$/h. In order to obtain single phase material, it was necessary to grind the sample after the first firing and to press the powders into pellets before annealing them for a second time in evacuated and sealed quartz ampoule. Magnetic properties have been investigated using the vibrating sample magnetometer (VSM). Room temperature magnetic hysteresis (M-H) curve showed an obvious ferromagnetic behavior and the magnetic moment per Fe atom under the applied of 0.8 T was estimated to be about $1.5\;{\mu}_B$/CoFe. But the magnetic moment per Fe atom under the applied of 0.8 T was estimated to be about $0.02\;{\mu}_B$/CoFe without Ti-getter. Size of particles is about $1\;{\mu}m$ using the transmission electron microscope (TEM). The ingredients of sample are distributed irregular in particles. Only Fe get shown on the surface of particles.

• Journal of Animal Environmental Science
• /
• v.11 no.3
• /
• pp.189-196
• /
• 2005

This study was carried out to determine the acceptability of liquid manure bin among livestock farmers and agricultural farmers, and quantify its malodorous compounds. The results were as follows; 1. The size of the manure bins owned by $93\%$ of 60 farmers surveyed was 200 M/T and were all in normal operation. Around $57\%$ of the normally operated bins were processed under aerobic condition. 2. Filly percent of the respondents utilized their liquid manure bin twice a year while $64\%$ used commercial microbial products to enhance maturity of their liquid manure and abatement of malodorous emissions. On the other hand, $43\%$ mentioned problems on the labor requirement, mechanical maintenance and lending cost of liquid manure processing and utilization, and the price of the commercial microbial products. 3. Malodorants emitted from livestock liquid manure bins and their boundary bin depended upon the livestock liquid manure processing condition. Within bin under the aerobic processing condition, Iso-valeric and propionic acid were ranged 0.012 to 0.07ppm and 0.17 to 2.85ppm, respectively. Within bin under the anoxic processing condition, n-butyric, n-valeric acid, and acetaldehyde were ranged 1.5 to 2.3ppm, 1.3 to 1.8ppm, and 0.8 to 2.1ppm, respectively. Malodorants emitted from the boundary of livestock liquid manure bins under the anoxic processing condition were detected the range of 0.4 to 0.9 ppm, more than the concentration of law regulation, as an acetaldehyde, but under the aerobic processing condition, they did not any detection.