• 제목/요약/키워드: J-Q-M approach

검색결과 6건 처리시간 0.023초

Fracture properties and crack tip constraint quantification of 321/690 dissimilar metal girth welded joints by using miniature SENB specimens

  • Bao, Chen;Sun, Yongduo;Wu, Yuanjun;Wang, Kaiqing;Wang, Li;He, Guangwei
    • Nuclear Engineering and Technology
    • /
    • 제53권6호
    • /
    • pp.1924-1930
    • /
    • 2021
  • By using miniature SENB specimens, the fracture properties of the materials in the region of welded metal, 321 stainless steel heat affected zone, 690 alloy heat affected zone of 321/690 dissimilar metal girth welded joints were tested. Both the J-resistance curves and critical fracture toughness of the three different materials are affected by the crack size because of the effect of crack tip constraint. Groups of constraint corrected J-resistance curves of the three materials are obtained according to J-Q-M approach. The welded metals exhibit the best fracture resistance but the worst fracture resistance is observed in the material of 690 alloy heat affected zone.

유한차분해석과 개별요소해석을 이용한 암반에 근입된 현장타설말뚝의 선단지지력 연구 (A Study on the Ultimate Point Resistance of Rock Socketed Drilled Shafts Using FLAC3D and UDEC)

  • 이재환;조후연;유광호;정상섬
    • 한국지반공학회논문집
    • /
    • 제28권1호
    • /
    • pp.29-39
    • /
    • 2012
  • 본 연구에서는 암반근입 현장타설말뚝의 선단지지력에 영향을 미치는 주요 영향인자들과 이들 영향인자에 따른 선단지지력의 변화특성을 수치해석을 통하여 분석하였다. 수치해석은 일반적으로 널리 사용되는 연속체해석 중 유한차분해석(FDM)과 암반에 존재하는 불연속면(절리, 단층 등)의 특성을 고려할 수 있는 불연속체해석 중 개별요소해석(DEM)을 병행함으로서 해석의 정확도를 높였다. 그 결과, 암반에 근입된 현장타설말뚝의 선단지지력($q_{max}$)은 암반의 탄성계수($E_m$), 불연속면의 간격($S_j$)에 비례하여 증가하였으며, 말뚝의 직경(D)에는 반비례하는 것을 확인할 수 있었다. 또한 불연속면의 경사($i_j$)에 대해서는 불연속면의 경사($i_j$)가 $0^{\circ}$ < $i_j$ < $60^{\circ}$일 때의 선단지지력은 그 외 경사의 선단지지력에 비해 최대 약 50%까지 감소하였으며 이는 말뚝으로부터 전해진 하중에 의하여 말뚝하부 암반 자체 보다 암반의 불연속면에서 먼저 전단파괴가 발생하였기 때문인 것으로 판단된다. 불연속면의 경사($i_j$)가 불연속면의 내부마찰각(${\phi}_j$)과 근접할 때 선단지지력이 최소치에 가까운 것으로 나타났으며, 따라서 불연속면의 경사가 일반적인 암반 및 암반 불연속면 내부마찰각의 범위인 $20^{\circ}{\sim}40^{\circ}$에 존재할 때는 선단지지력의 산정 시 반드시 불연속면 경사의 영향을 고려해야하는 것으로 나타났다.

Pulsed-laser-diode Intermittently Pumped 2-㎛ Acousto-optic Q-switched Tm:LuAG Laser

  • Wen, Ya;Jiang, Yan;Zheng, Hao;Zhang, Hongliang;Wang, Chao;Wu, Chunting;Jin, Guangyong
    • Current Optics and Photonics
    • /
    • 제4권3호
    • /
    • pp.238-246
    • /
    • 2020
  • The heat distribution in crystals in a 2-㎛ acousto-optic Q-switched Tm:LuAG laser pumped by pulsed-laser-diode (pulsed-LD) intermittent-pumping technology was analyzed using COMSOL software. The thermal lensing effect of the Tm:LuAG crystal can be mitigated by pulsed-LD intermittent-pumping techniques. An experimental setup using this kind of approach achieved maximum output energy of 8.31 mJ, minimum pulse width of 101.9 ns, and highest peak power of 81.55 kW, reached at a Q-switched repetition rate of 200 Hz. It offers significant improvement of performance of the output laser beam, compared to pulsed-LD double-ended pumping technology at the same repetition rate.

행동기반 제어방식을 위한 득점과 학습을 통한 행동선택기법 (Action Selection by Voting with Loaming Capability for a Behavior-based Control Approach)

  • 정석민;오상록;윤도영;유범재;정정주
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
    • /
    • pp.163-168
    • /
    • 2002
  • The voting algorithm for action selection performs self-improvement by Reinforcement learning algorithm in the dynamic environment. The proposed voting algorithm improves the navigation of the robot by adapting the eligibility of the behaviors and determining the Command Set Generator (CGS). The Navigator that using a proposed voting algorithm corresponds to the CGS for giving the weight values and taking the reward values. It is necessary to decide which Command Set control the mobile robot at given time and to select among the candidate actions. The Command Set was learnt online by means as Q-learning. Action Selector compares Q-values of Navigator with Heterogeneous behaviors. Finally, real-world experimentation was carried out. Results show the good performance for the selection on command set as well as the convergence of Q-value.

  • PDF

Large eddy simulation of wind loads on a long-span spatial lattice roof

  • Li, Chao;Li, Q.S.;Huang, S.H.;Fu, J.Y.;Xiao, Y.Q.
    • Wind and Structures
    • /
    • 제13권1호
    • /
    • pp.57-82
    • /
    • 2010
  • The 486m-long roof of Shenzhen Citizens Centre is one of the world's longest spatial lattice roof structures. A comprehensive numerical study of wind effects on the long-span structure is presented in this paper. The discretizing and synthesizing of random flow generation technique (DSRFG) recently proposed by two of the authors (Huang and Li 2008) was adopted to produce a spatially correlated turbulent inflow field for the simulation study. The distributions and characteristics of wind loads on the roof were numerically evaluated by Computational Fluid Dynamics (CFD) methods, in which Large Eddy Simulation (LES) and Reynolds Averaged Navier-Stokes Equations (RANS) Model were employed. The main objective of this study is to explore a useful approach for estimations of wind effects on complex curved roof by CFD techniques. In parallel with the numerical investigation, simultaneous pressure measurements on the entire roof were made in a boundary layer wind tunnel to determine mean, fluctuating and peak pressure coefficient distributions, and spectra, spatial correlation coefficients and probability characteristics of pressure fluctuations. Numerical results were then compared with these experimentally determined data for validating the numerical methods. The comparative study demonstrated that the LES integrated with the DSRFG technique could provide satisfactory prediction of wind effects on the long-span roof with complex shape, especially on separation zones along leading eaves where the worst negative wind-induced pressures commonly occur. The recommended LES and inflow turbulence generation technique as well as associated numerical treatments are useful for structural engineers to assess wind effects on a long-span roof at its design stage.

QTL Identification Using Combined Linkage and Linkage Disequilibrium Mapping for Milk Production Traits on BTA6 in Chinese Holstein Population

  • Hu, F.;Liu, J.F.;Zeng, Z.B.;Ding, X.D.;Yin, C.C.;Gong, Y.Z.;Zhang, Q.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제23권10호
    • /
    • pp.1261-1267
    • /
    • 2010
  • Milk production traits are important economic traits for dairy cattle. The aim of the present study was to refine the position of previously detected quantitative trait loci (QTL) on bovine chromosome 6 affecting milk production traits in Chinese Holstein dairy cattle. A daughter design with 918 daughters from 8 elite sire families and 14 markers spanning the previously identified QTL region were used in the analysis. We employed a combined linkage and linkage disequilibrium analysis (LDLA) approach with two options for calculating the IBD probabilities, one was based on haplotypes of all 14 markers (named Method 1) and the other based on haplotypes with sliding windows of 5 markers (named Method 2). For milk fat yield, the two methods revealed a highly significant QTL located within a 6.5 cM interval (Method 1) and a 4.0 cM interval (Method 2), respectively. For milk protein yield, a highly significant QTL was detected within a 3.0 cM interval (Method 1) or a 2.5 cM interval (Method 2). These results confirmed the findings of our previous study and other studies, and greatly narrowed down the QTL positions.