• 한국결정성장학회지
• /
• 제7권1호
• /
• pp.70-75
• /
• 1997

Electron beam 증착법을 보완하여 GaAs(100)기판위에 cubic(zinc blende) CdSe 에피충을 성장시켜 그의 특성을 조사하였다 .. CdSe 에피충의 격자 상수는 6.077 A였으며, 배향 성은 ECP 패번에 의하여 확인되고 결정성은 DCXR curve로 관찰하였다. 상온에서 측정된 H Hall data로는 에피충의 운반자 농도와 이통도는 각각 1018cm-3, 102cm2N' see 정도임을 알았 고 30 K에서 측정한 PC spectra peak는 cubic CdSe의 free exciton에 기인된 것으로 1.746 e eV에서 예리하게 나타냐고 있음을 보여주고 있다.

• 한국산학기술학회논문지
• /
• 제18권5호
• /
• pp.252-261
• /
• 2017

본 연구에서는 유정용 강관의 열처리 조건에 따른 미세조직 및 기계적 성질을 조사하였다. 실험에 사용된 유정용 강관의 종류는 J55 강재를 사용 하였고, 열처리 조건은 각각 오스테나이트 처리온도 ($880^{\circ}C$, $910^{\circ}C$, $940^{\circ}C$), 냉각방식 (수냉, 유냉), 템퍼링 온도 (미실시, $550^{\circ}C$, $650^{\circ}C$) 이다. 열처리 조건에 따라 얻어지는 미세조직을 예측하기 위해 J55 강재의 화학적 성분을 기준으로 평형상태도와 CCT 곡선을 시뮬레이션 하였으며, 그 결과 A1, A3 온도가 약 $20^{\circ}C$ 감소 하는 결과를 얻을 수 있었다. 냉각속도에 따라 마르텐사이트, 베이나이트, 페라이트등 예상되는 미세조직을 정성적으로 알 수 있었고 이 결과는 실제 실험값과 유사한 양상을 나타내었다. 오스테나이트 처리온도가 증가 함에 따라 구 오스테나이트 결정립이 조대화 되었으며, 특히 $920^{\circ}C$ 이상에서 결정립 크기가 급격히 증가하였다. 따라서 결정립 미세화 효과에 따라 경도와 강도는 감소 하였다. 열처리 조건이 변화함에 따라 마르텐사이트, 베이나이트, 페라이트 등 다양한 조직이 생성되었으며, 이는 경도, 강도 및 연신율에 큰 영향을 미쳤다. 수냉의 경우 마르텐사이트 조직이, 유냉의 경우 베이나이트와 페라이트 조직이 형성되었으며 수냉한 시편이 더 우수한 기계적 성질을 나타내었다. 템퍼링 처리후 마르텐사이트 조직 내에 FeC 석출물이 생성되었고 템퍼링 처리온도가 증가함에 따라 FeC석출물이 조대화되면서 인성이 향상되었다.

• 수산경영론집
• /
• 제25권1호
• /
• pp.37-59
• /
• 1994

Many studies to cope with the present problems of Korean coastal and offshore fisheries has been performed, but these were done partly in necessities and general studies for Korean inshore and offshore fisheries are in early stage. Most of these studies adopted analytical way of approach for each fishery individually and they could not reflect the effect of correlated interaction among fisheries on the several common species/stocks, and thus optimal effort allocation was impossible. To consider general fisheries and optimal effort allocation among competing mixed species, a linear programming (LP) approach is applied in this study and introduced into 16 important inshore and offshore fisheries with 13 constraining species which were chosen by annual yield order. This study is not based on the biological interaction among species (i.e., prey - predator system) but the technological interaction between species and fishing efforts. For the application of LP model in these fisheries, the standardization of fishing efforts through different fishing gears could not be successful and a new way of effort standardization through CPUE for vessel tonnage was originated. Total standardized fishing effort on a particular species i, Ei, is computed as the linear summation of standardized fishing effort generated by each fishery j. That is, (equation omitted) where $f_{j}$ is the total vessel tonnage of fishery j and aij is the coefficients contributing to the standardized fishing effort per ton for species i taken in fishery j. The total fishing effort level on species i due to both directed fishing and by - catch can thus be accounted in the aij's. Optimal effort allocation among the j fisheries may be considered a minimizing problem (minimize $\Sigma$ $f_{j}$), subject to the constraints that standardized fishing effort levels on particular species are maintained at, above, and below certain predefined levels. Fishing effort goals for individual species can be based on various biological and/or economic criteria, i.e., fishing effort level generating maximum sustainable yield and/or maximum economic yield. But in this study the $F_{0.1}$ criteria which was accepted as an approximate level for $F_{mey}$ by Outland and Boerema's (1973) study. The findings of this study are, (1) LP model can be applied to the Korean inshore and offshore fisheries giobally. (2) Through a new way of combining multiple different fisheries' efforts for a particular species together generating standardized fishing effort, Schaefer curve could be applied to the complex system successfully. (3) The results of this study for total reduction scale were mostly the same as those of prior studies, but different much from the individual scales of reduction. This study showed the necessities for exploitation of more concrete parameters to put into consideration of profitability of fisheries and social factors, and this model can be modified according to the actual constraints. Also, considering the age structure of stocks, this model can be developed into better one for better fisheries management.ent.

• 농업과학연구
• /
• 제7권2호
• /
• pp.145-155
• /
• 1980

곡물(穀物)의 초기온도(初期溫度), 함수율(含水率), 공극률(空隙率)을 변화(變化)시키면서 미맥(米麥)의 비열(比熱)을 Cooling curve method에 의(依)해 측정(測定)하여 이들 세 인자(因子)를 함수(函數)로 하는 미맥(米麥)의 비열(比熱)에 관(關)한 수학적(數學的) 모델을 개발(開發)하였으며 이들 인자(因子)들이 비열(比熱)에 미치는 영향(影響)을 분석(分析)했던 바 그 결과(結果)를 요약(要約)하면 다음과 같다. 1. 공시(供試)된 미맥(米麥)의 비열(比熱) 변화(變化) 범위(範圍)는 과맥의 경우 $1.8209-2.7041kJ/kg\;^{\circ}K$, 대맥(大麥) $1.8862-2.5625kJ/kg\;^{\circ}K$, Japonica형(型)벼 $1.5167-2.3779kJ/kg\;^{\circ}K$, 통일형(統一型)벼 $1.5260-2.3981kJ/kg\;^{\circ}K$였다. 2. 곡물(穀物)의 초기온도(初期溫度), 함수율(含水率), 공극률(空隙率) 등(等)을 함수(含水)로 하는 미맥(米麥) 비열(比熱)을 모델을 각(各) 공시곡물(供試穀物) 별(別)로 개발(開發)하였으며 벼의 경우 Japonica형(型)벼와 통일형(統一型)벼의 모델을 따로 유도(誘導)하였다. 3. 곡물(穀物)의 초기온도(初期溫度)에 따른 비열(比熱)의 변화(變化)는 벼의 경우 초기온도(初期溫度)에 따라 감소(減少)하였으나 보리의 경우는 초기온도(初期溫度)에 따라 증가(增加)하였다. 4. 미맥(米麥)의 비열(比熱)은 그 함수율(含水率)이 증가(增加)함에 따라 대체(大體)로 증가(增加)하였다. 5. 공극률(空隙率)에 따른 비열(比熱)의 변화(變化)는 통일형(統一型) 벼를 제외(除外)한 모든 공시곡물(供試穀物)에서 공극률(空隙率)에 따라 비열(比熱)은 감소(減少)하였다.

• 제어로봇시스템학회논문지
• /
• 제11권6호
• /
• pp.502-509
• /
• 2005

In this paper, a 4-wheel vehicle model including the effects of tire slip was considered, along with variable parameter sliding control, in order to improve the performance of the vehicle longitudinal response. The variable sliding parameter is made to be proportional to the square root of the pressure derivative at the wheel, in order to compensate for large pressure changes in the brake cylinder. A typical tire force-relative slip curve for dry road conditions was used to generate an analytical tire force-relative slip function, and an antilock sliding control process based on the analytical tire force-relative slip function was used. A retrofitted brake system, with the pushrod force as the end control parameter, was employed, and an average decay function was used to suppress the simulation oscillations. The simulation results indicate that the velocity and spacing errors were slightly larger than those obtained when the wheel slip effect was not considered, that the spacing errors of the lead and follower were insensitive to the adhesion coefficient up to the critical wheel slip value, and that the limit for the antilock control under non-constant adhesion road conditions was determined by the minimum value of the equivalent adhesion coefficient.

• 한국소음진동공학회논문집
• /
• 제23권4호
• /
• pp.295-300
• /
• 2013

The noise map can be applied to predict the effect of noise and establish the noise reduction measure. But the predicted value in the noise map can vary depending on the input variables. Thus, we surveyed the several prediction models and analyzed the changes corresponding to the variables for obtaining the coherency and accuracy of prediction results. As a result, we know that the Schall03 and CRN model can be applied to predict the railway noise in Korea and the correction value, such as bridges correction, multiple reflection correction, curve correction must be used for reflecting the condition of the prediction site. Also, we know that the prediction guideline is an essential prerequisite in order to obtain the unified and accurate predicted value for railway noise.

• 소성∙가공
• /
• 제20권3호
• /
• pp.193-205
• /
• 2011

Because of its rustproof property, stainless steel is widely used in kitchen appliances, building materials, electronics, chemical plants and automobile exhausts. In addition, the utilization of stainless steel for fuel cell application is growing. As the demand for this material increases, it is necessary to study the basic properties of stainless steel such as corrosion resistance, heat transfer, formability, cutting or shearing ability and weldability. In this article, the mechanical properties, formability and press forming performance of stainless steel are reviewed. Since temperature and strain rate affect the press forming performance of STS304(austenitic) stainless steel, the influence of these parameters on the plastic behavior should be investigated. Moreover, measures for the prevention of ridging of STS430(ferritic) and delayed fracture of STS430, which respectively appear during and after press forming, should be considered. Recently, stainless steel sheets with a thickness lower than 0.2 mm have been widely used in applications for mobile phone, digital camera and fuel cell separator. Therefore, there is a growing interest of studying the grain size effect and plasticity at the crystal scale in order to understand the anisotropic behavior and micro forming ability of thin sheets. This review paper was written with the objective of helping engineers and researchers to understand the forming characteristics of stainless steel and to establish standards in plastic forming techniques.

• 소성∙가공
• /
• 제20권2호
• /
• pp.146-153
• /
• 2011

This study aimed at providing an experimental database for the mechanical properties of AZ31B magnesium alloy sheet such as stress-strain curve, yield stress, R-value and forming limit diagram(FLD) at various strain-rates and temperatures. Tensile tests were carried out on specimens having the orientations of $0^{\circ}$, $45^{\circ}$ and $90^{\circ}$ to the rolling direction with different crosshead speeds in the range between 0.008 and 8 mm/s at temperature from 25(room temperature) to $300^{\circ}C$. The influence of the specimen gage length on the tensile properties was investigated. FLD tests were performed at punch speed of 0.1 and 1.0 mm/s in the same temperature range as that of the tensile tests. Swift cup tests were conducted to verify the usefulness of the material database and the reliability of the finite element analysis(FEA). The effects of strain-rate as well as temperature were taken into account in these simulations. It was shown that the FLD-based failure was reasonably well predicted by the thermal-deformation coupled analysis for this rate-sensitive material.

• Journal of the Korean Wood Science and Technology
• /
• 제45권6호
• /
• pp.671-681
• /
• 2017

Oil palm trunk (OPT) is a potential source of biomass for the production of biopellet. In the present research, biopellet were prepared from the meristem part of 25 years old OPT with various percentages of its bark (0, 10, and 30%). The highest biopellet durability was found for biopellet produced at $130^{\circ}C$ of pelletizing temperature with 30% bark content. Scanning electron microscopy (SEM) of biopellet showed the weak of particle bonding due to the low pelletizing pressure. The moisture content, unit density, ash content, and caloric value of OPT-based pellets were 3.55-5.35%, $525.56-855.23kg/m^3$, 2.76-3.44%, and 17.89-19.14 MJ/kg, respectively. The combustion profiles obtained by thermogravimetric analysis (TGA) seemed to be unaffected by the bark content on. Differential thermal analysis of TGA curve indicated different pyrolysis characteristic of hemicellulose, cellulose, and lignin.

• Journal of Magnetics
• /
• 제13권2호
• /
• pp.61-64
• /
• 2008

We studied the effect of the variation of the lattice constant on the electrical properties of $SrRuO_3$ thin films. In order to obtain films with different volumes, we varied the substrate temperature and oxygen pressure during the growth of the films on $SrTiO_3$ (001) substrates. The films were grown using a pulsed laser deposition method. The X-ray diffraction patterns of the grown films at low temperature and low oxygen pressure indicated the elongation of the c-axis lattice constant compared to that of the films grown at a higher temperature and higher oxygen pressure. The in-plane strain states are maintained for all of the films, implying the expansion of the unit-cell volume by the oxygen vacancies. The variation of the electrical resistance reflects the temperature dependence of the resistivity of the metal, with a ferromagnetic transition temperature inferred form the cusp of the curve being observed in the range from 110 K to 150 K. As the c-axis lattice constant decreases, the transition temperature linearly increases.