• 대한수학회논문집
• /
• 제30권2호
• /
• pp.65-72
• /
• 2015

The minimum rank mr(G) of a simple graph G is defined to be the smallest possible rank over all symmetric real matrices whose (i, j)-th entry (for $i{\neq}j$) is nonzero whenever {i, j} is an edge in G and is zero otherwise. The corona $C_n{\circ}K_t$ is obtained by joining all the vertices of the complete graph $K_t$ to each n vertex of the cycle $C_n$. For any t, we obtain an upper bound of zero forcing number of $L(C_n{\circ}K_t)$, the line graph of $C_n{\circ}K_t$, and get some bounds of $mr(L(C_n{\circ}K_t))$. Specially for t = 1, 2, we have calculated $mr(L(C_n{\circ}K_t))$ by the cut-vertex reduction method.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.830-833
• /
• 2006

In this work, we provided a novel test method to verify the sealing materials for flexible LCD cell. The ultraviolet type curing sealing material with low process temperature was suitable for LCD cell assembly. We also proposed the sealing materials which passed 13200 times bending test within 20 mm curvature.

• Progress in Superconductivity
• /
• 제9권1호
• /
• pp.62-67
• /
• 2007

The effects of the heat-treatment temperature on the carbon (C) substitution amount, full width at half maximum (FWHM) value, critical temperature ($T_c$), critical current density ($J_c$) have been investigated for 10 wt % malic acid ($C_4H_6O_5$)-doped $MgB_2/Fe$ wires. All the samples were fabricated by the in-situ powder-in-tube (PIT) method and heat-treated within a temperature range of $650^{\circ}C$ to $1000^{\circ}C$. As the heat-treatment temperature increased, it seemed that the lattice distortion was increased by a more active C substitution into the boron sites from the malic acid addition. These increased electron scattering defects seemed to enhance the $J_c-H$ properties in spite of an improvement in the crystallinity, such as a decrease of the FWHM value and an increase of the $T_c$. Compared to the un-doped wire heat-treated at $650^{\circ}C$ for 30 min, the $J_c$ was enhanced by the C doping in a high-field regime. The wire heat-treated at $900^{\circ}C$ resulted in a higher magnetic $J_c$ of approximately $10^4\;A/cm^2$ at 5 K and 8 T.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.393-394
• /
• 2004

To get rid of cell assembly margin and have more process room of upper substrate, we developed truly COT (Color Filter On TFF Array) LCDs in that B/M (Black Matrix) as well as C/F (Color Filter) layer is located on TFT substrate. Novel B/M material is also developed for this COT structure. Difficulty in making contact hole through C/F layer was solved by making each C/F pattern isolated from others. We think this configuration will be core technology for prominent COT LCDs.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1673-1675
• /
• 2001

In this paper, Partial Discharge(PD) patterns are compared by means of Low Frequency PD(LFPD, based on the IEC 270) and recently proposed High Frequency PD(HFPD). For this purpose, three different types of artificial defects are provided such as corona in air, void in epoxy insulator and needle defect in XLPE cable insulation. PD were generated from each defect and then detected respectively by two different methods such as LFPD and HFPD. As a result, remarkable resemblance in PD pattern for differ detecting method have been observed from each defect. Accordingly, it could be deduced that the pattern recognition by LFPD could be regarded as the reference for the investigations by HFPD.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1399-1401
• /
• 2001

We studied on structure and resistivity, temperature coefficient of resistance (TCR) of NiCr and NiCr-N thin resistor films prepared by do reactive magnetron sputtering of NiCr target. It is found that while pure NiCr films are polycrystalline, an addition of nitrogen (N2/(Ar+N2) ratios are between 10% and 70%) into the film is changed into amorphous structure and sheet resistance of films is increased. Measurement temperatures of TCR are ratios of $5^{\circ}C$ per 15min from $25^{\circ}C$ to $130^{\circ}C$. TCR for an as-deposited NiCr-N thin film is varied from positive to negative.

• 대한수학회지
• /
• 제42권4호
• /
• pp.773-793
• /
• 2005

We consider interesting conditions, one of which will be called the disjoint $(A^2,\;D^2)-pair$ property, on genus $g{\geq}2$ Heegaard splittings of compact orient able 3-manifolds. Here a Heegaard splitting $(C_1,\;C_2;\;F)$ admits the disjoint $(A^2,\;D^2)-pair$ property if there are an essential annulus Ai normally embedded in $C_i$ and an essential disk $D_j\;in\;C_j((i,\;j)=(1,\;2)\;or\;(2,\;1))$ such that ${\partial}A_i$ is disjoint from ${\partial}D_j$. It is proved that all genus $g{\geq}2$ Heegaard splittings of toroidal manifolds and Seifert fibered spaces admit the disjoint $(A^2,\;D^2)-pair$ property.

• 한국수의병리학회지
• /
• 제3권2호
• /
• pp.93-94
• /
• 1999

Spontaneous hydronephrosis was found in a 19 month-old female C57BL/KsJ-Lep $r^{db}$ / Lep $r^{db}$ mouse. We described the gross and histological appearance of spontaneous in db mouse The left kidney was dilated and filled with urine. Microscopically the renal pelvis was remarkedly dilated and the renal cortex and renal papilla were flattened.

• 한국전기전자재료학회논문지
• /
• 제11권4호
• /
• pp.327-333
• /
• 1998

The influence of slow cooling and annealing time in $O_2$in MPEG process on $J_c$ was investigated. From the measurement of $J_c$,SEM and XRD, it was observed that the critical current density was related with the slow cooling time and annealing time in $O_2$. The value of $J_c$ was the highest at slow cooling time of 40 hour. And also, the value of $J_c$ along the annealing time in $O_2$in the case of the slow cooling time of 40 hours was inclined to increase with annealing time. Consequently, it can be suggested that proper slow cooling time and annealing time after slow cooling in MPMG process be important to improve the critical characteristics.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1995년도 추계학술발표회논문집(1)
• /
• pp.147-152
• /
• 1995

During transients or major upsets, operators of a nuclear power plant are faced with a significant amount of information which oftentimes exceeds their capability of processing information in such a time-critical situation. To help resolve this problem of information overload, considerable work is underway worldwide to improve its man-machine interface systems (MMISs). The I&C research team of KAERI is developing a DYNamic Alarm processing System, called DYNAS, to suppress unnecessary or nuisance alarms, and at the same time, emphasize vital information. This paper describes our basic strategy to process alarms in DYNAS.