• Journal of Information Display
• /
• 제1권1호
• /
• pp.14-19
• /
• 2000

Due to distinct properties of plastic substrates such as poor thermal resistance, non-rigidness and high thermal expansion, it is difficult to fabricate plastic film LCDs by conventional LCD processes. Poor thermal resistance and high thermal expansion of substrates induced deformation of substrates surface, mismatch of thermal expansion between ITO electrodes and substrates resulted in defects in the ITO electrodes during the high temperature process. Defects of ITO electrodes and non-uniform cell gap caused by non-rigid and flexible properties were also observed in the pressuring process. Based on in these observations, we used a newly developed material and fabrication process to prevent deformation of substrates, defects of electrodes and to maintain uniform cell gap. The maximum temperature of the process is limited up to $110^{\circ}C$ and pressure loaded during the process is five times less than conventional one. With these invented processes and materials, we obtained highly reliable Plastic Film STN LCDs whose electro-optical characteristics are better than or equivalent to those of typical glass LCDs.

• 대한수학회논문집
• /
• 제10권1호
• /
• pp.207-213
• /
• 1995

Let $(\Omega, F, P)$ be a probability space with F a $\sigma$-algebra of subsets of the measure space $\Omega$ and P a probability measure on $\Omega$. Suppose $a > 0$ and let $(F_t)_{t \in [0,a]}$ be an increasing family of sub-$\sigma$-algebras of F. If $r > 0$, let $J = [-r,0]$ and $C(J, R^n)$ the Banach space of all continuous paths $\gamma : J \to R^n$ with the sup-norm $\Vert \gamma \Vert = sup_{s \in J}$\mid$\gamma(s)$\mid$$ where $$\mid$\cdot$\mid$$ denotes the Euclidean norm on $R^n$. Let E,F be separable real Banach spaces and L(E,F) be the Banach space of all continuous linear maps $T : E \to F$.

• 한국전기전자재료학회논문지
• /
• 제22권11호
• /
• pp.987-991
• /
• 2009

We report growth of vertically well-aligned zinc oxide (ZnO) nanorods on indium-tin oxide (ITO)/glass substrates using a simple aqueous solution method at low temperature via control of the ZnO seed layer morphology. ZnO nanoparticles acting as seeds are pre-coated on ITO-coated glass substrates. by spin coating to control distribution and density of the ZnO seed nanoparticles. ZnO nanorods were synthesized on the seed-coated substrates in a dipping process into a main growth solution. It was found that the alignment of ZnO nanorods can be effectively manipulated by the spin-coating speed of the seed layer. A grazing incidence X-ray diffraction pattern shows that the ZnO seed layer prepared using the higher spin-coating speed is of uniform seed distribution and a flat surface, resulting in the vertical growth of ZnO nanorods aligned toward the [0001] direction in the main growth process.

• Journal of Korean Vacuum Science & Technology
• /
• 제3권1호
• /
• pp.79-84
• /
• 1999

the photolithographic patterning on an indium-tin oxide (ITO) glass and the electro-phoretic deposition were combined for preparing the screen of the full-color field emission display(FED). the patterns with a pixel of 400$\mu\textrm{m}$ on the ITO-glass were made by etching the ITO with well-prepared etchant consisting of HCL, H2O, and HNO3. Electrophoretic method was carried out in order to deposit each spherical red (R), green(G), and blue (B) phosphor on the patterned ITO-glass. The process parameters such as bias voltage, salt concentration, and deposition time were optimized to achieve clear boundaries. It was found that the etching process of ITO combined with electrophoretic method was cost-effective, provided distinct pattern, and even reduced process steps compared with conventional processes. The application of reverse bias to the dormant electrodes while depositing the phosphors on the stripe pattern was found to be very critical for preventing the cross-contamination of each phosphor in a pixel.

• 한국산업보건학회지
• /
• 제23권3호
• /
• pp.299-306
• /
• 2013

Objectives: The purpose of this study is to provide current the recent information on indium-related adverse health effects and the Korean indium-related industries. Methods: Peer review papers were searched in environmental, occupational and medical journals with the keyword of 'Indium' and 'ITO' and reviewed. To determine the indium related industries and indium consumption amounts, references and database were investigated and analyzed. In addition, field walk-through surveys and interviews were conducted in order to collect field data and to ascertain the field situation for the processes and industries. Results: A total of 10 cases of indium lung diseases have been reported in series since the first case reported in 2001. Seven cases were found in Japan, two cases in the United States, and one in China. No indium lung case has been reported yet in Korea, but it is believed that there are high potential risks among workers in indium-related industries. There are four categories in indiumrelated- industry; indium production and smelting, manufacturing of indium products such as ITO target, the production of thin films of flat panel display, and indium recovery industry. We found that all these types of industries are operating in Korea. Therefore, it is necessary for industrial hygienists to understand the processes and industries related to indium as well as the adverse health effects of indium. Conclusions: It was found that all four categories of indium-related industry from the indium production to recovery industry are active in Korea. However, the adverse health effects of indium are not well recognized. Therefore, it is believed that there is a high risks in indium-related industry, and it is necessary to make emergency interventions.

• 한국표면공학회지
• /
• 제40권4호
• /
• pp.165-169
• /
• 2007

Compared to conventional Indium Tin Oxide (ITO) film deposition methods, cesium (Cs) assisted sputtering offers higher film characteristics in terms of electrical, mechanical and optical properties. However, it showed highly non-linear characteristics between process input factors and equipment responses. Therefore, to maximize film quality, optimization of manufacturing process is essential and process characterization is the first step for process optimization. For this, we designed 2 level design of experiment (DOE) to analyze ITO film characteristics including film thickness, resistivity and transmittance. DC power, pressure, carrier flow, Cs temperature and substrate temperature were selected for process input variables. Through statistical effect analysis methods, relation between three types of ITO film characteristics and five kinds of process inputs are successfully characterized and eventually, it can be used to optimize Cs assisted sputtering processes for various types of film deposition.

• Journal of the Korean Statistical Society
• /
• 제29권4호
• /
• pp.489-499
• /
• 2000

We propose a new instrumental variable estimator of the complex parameter of a class of univariate complex-valued diffusion processes defined by the possibly non-stationary and/or nonlinear stochastic differential equations. On the basis of the exact finite sample distribution of the pivotal quantity, we construct the exact confidence intervals and the exact tests for the parameter. Monte-Carlo simulation suggests that the new estimator seems to provide a viable alternative to the maximum likelihood estimator (MLE) for nonlinear and/or non-stationary processes.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.913-918
• /
• 2005

It is expected that the inkjet technology offers prospect for reliable and low cost manufacturing of FPD (Flat Panel Display). This inkjet technology also offers a more simplified manufacturing process for various part of the FPD than conventional process. For example, recently the novel manufacturing processes of color filter (C/F) in LCD, or RGB patterning in OLED by inkjet printing method have been developed. This elaborates will be considered as the precious point of manufacturing process for the mass production of enlarged-display panel with a low price. On this point of view, we would like to review the status of inkjet technology in FPD, with some results on forming micro line by inkjet patterning of suspension type silver nano ink as below. We have studied the inkjet patterning of synthesized aqueous silver nano-sol on interface-controlled ITO glass substrate. Furthermore, we designed the conductive ink for direct inkjet patterning on bare ITO glass substrate. The first, the highly concentrated polymeric dispersant-assisted silver nano sol was prepared. The high concentration of batch-synthesized silver nano sol was possible to 40 wt%. At the same time the particle size of silver nanoparticles was below $10{\sim}20nm$. The second, the synthesized silver nano sol was inkjet - patterned on ITO glass substrate. The connectivity and width of fine line depended largely on the wettability of silver nano sol on ITO glass substrate, which was controlled by surfactant. The relationship was understood by wetting angle. The line of silver electrode as fine as $50{\sim}100\;{\mu}m$ was successfully formed on ITO glass substrate. The last, the direct inkjet-patternable silver nano sol on bare ITO glass substrate was designed also.

• 한국재료학회지
• /
• 제27권3호
• /
• pp.149-154
• /
• 2017

Transparent conducting oxides (TCOs) were fabricated using solution-based ITO (Sn-doped $In_2O_3$) nanoinks with nanorods at an annealing temperature of $200^{\circ}C$. In order to optimize their transparent conducting performance, ITO nanoinks were composed of ITO nanoparticles alone and the weight ratios of the nanorods to nanoparticles in the ITO nanoinks were adjusted to 0.1, 0.2, and 0.5. As a result, compared to the other TCOs, the ITO TCOs formed by the ITO nanoinks with weight ratio of 0.1 were found to exhibit outstanding transparent conducting performance in terms of sheet resistance (${\sim}102.3{\Omega}/square$) and optical transmittance (~80.2 %) at 550 nm; these excellent properties are due to the enhanced Hall mobility induced by the interconnection of the composite nanorods with the (440) planes of the short lattice distance in the TCOs, in which the presence of the nanorods can serve as a conducting pathway for electrons. Therefore, this resulting material can be proposed as a potential candidate for solution-based TCOs for use in optoelectronic devices requiring large-scale and low-cost processes.

• 대한수학회논문집
• /
• 제20권2호
• /
• pp.381-393
• /
• 2005

We consider a type of large deviation principle obtained by Freidlin and Wentzell for the solution of Stochastic differential equations in a conuclear space. We are using exponential tail estimates and exit probability of a Ito process. The nuclear structure of the state space is also used.