• Carbon letters
• /
• v.13 no.2
• /
• pp.109-114
• /
• 2012

A nuclear, biological, chemical (NBC) canister was indigenously developed using active carbon impregnated with ammoniacal salts of copper (II), chromium (VI) and silver (I), and high efficiency particulate aerosol filter media. The NBC canister was evaluated against carbon tetra chloride ($CCl_4$) vapours, which were used as a simulant for persistent chemical warfare agents under dynamic conditions for testing breakthrough times of canisters of gas masks in the National Approval Test of Respirators. The effects of $CCl_4$ concentration, test flow rate, temperature, and relative humidity (RH) on the breakthrough time of the NBC canister against $CCl_4$ vapour were also studied. The impregnated carbon that filled the NBC canister was characterized for surface area and pore volume by $N_2$ adsorption-desorption isotherm at liquid nitrogen temperature. The study clearly indicated that the NBC canister provides adequate protection against $CCl_4$ vapours. The breakthrough time decreased with the increase of the $CCl_4$ concentration and flow rate. The variation in temperature and RH did not significantly affect the breakthrough behaviour of the NBC canister at high vapour concentration of $CCl_4$, whereas the breakthrough time of the NBC canister was reduced by an increase of RH at low $CCl_4$ vapour concentration.

• Applied Chemistry for Engineering
• /
• v.8 no.3
• /
• pp.403-409
• /
• 1997

The equilibrium constants of five deoxyribonucleosides (dDyd, dUrd, dGuo, dThd, dAdo) were estimated by the plate theory and the moment method under isocratic conditions of the Reversed-Phase High Performance Liquid Chromatography (RP-HPLC). The mobile phase in this system was composed of water and organic modifiers(acetonitrile and methanol) The plate theory of linear adsorption isotherm was treated on the basis of continuous flow of eluent through the plates of the column. The moment method was utilized to find the equilibrium constant from the first absolute moment of experimental data. The equilibrium constants of five deoxyribonucleosides in the two methods were very close, and also the equilibrium constants calculated by capacity factor were similar to those by both the plate theory and the moment method. The equilibrium constant was expressed as a semi-log function of the quantity of organic modifier. Excellent agreements between the calculated elusion profile by the plate theory and the experimental data were observed.

• Fashion & Textile Research Journal
• /
• v.16 no.3
• /
• pp.476-484
• /
• 2014

The purpose of this study was to investigate the dyeing properties and anti-microbial ability of silk and wool fabrics dyed with Terminalia chebula Retzius(TCR) extract using two extraction solvent, hot water and methanol. Dyeing properties of fabrics were studied by investigating the characteristics of colorant, changes in dye uptake under different dyeing conditions, and by investigating color change when mordants were applied. Also, color fastness, and antimicrobial activity of dyed fabrics were estimated. Regardless of extraction solvent type, colorant showed maximum absorption wavelength at 280 nm and 578 nm, which implied that tannin was the major pigment component of TCR. Also, through FT-IR spectrum result, it was confirmed that tannin of TCR methanol extract was hydrolysable tannin. But for the hot water extract, it was only assumed that its tannin was condenced tannin. Fabric dyed with hot water solvent extract showed higher dye uptake than fabric dyed with methanol solvent extract, dye uptake increasing by higher concentration of the dye, longer dyeing time and higher dyeing temperature. And the absorption curve between TCR extract and protein fiber was shaped in the form of Langmuir adsorption isotherm. Fabric dyed without mordant was yellow in color, and when dyed with mordant, fabric showed various colors depending on mordant types except Sn. Color fastness to washing was generally fine and color fastness to light was moderate. But color fastness to rubbing and dry cleaning was outstanding. Lastly, dyed fabrics showed very good antimicrobial activity of 99.9% against Staphylococcus aureus and Kiebsiella pneumoniae.

• Korean Journal of Environmental Agriculture
• /
• v.10 no.2
• /
• pp.128-132
• /
• 1991

This study was carried out to find a method to remove cadmium from soil and/or attenuate in Cd saturated Soil The chemical form of Cd was influenced by the physico-chemical properties of soil and the adsorption of Cd by soil conformed to the Langmuir isotherm. The order of Cd contents in chemical fractions extracted by several reagents was EDTA > NaOH > $HNO_3$. Flooding, liming and the addition of chelating agents and clay minerals to the contaminated soil seems to desirable in alleviating the harmful effects of Cd on plant growth by reducing Cd content in the $KNO_3$ fraction.

• Analytical Science and Technology
• /
• v.8 no.2
• /
• pp.205-213
• /
• 1995

Counter-diffusion of coronene desorbed from alumina with addition of tetra-phenylporphine was studied by spectrophotometry. The counter-diffusion processes of adsorbing and desorbing materials in liquid phase were simulated by counter-diffusion model based on Fritz's binary component isotherm under an assumption of equimass diffusion. The counter-diffusivities of desorbed coronene with addition of tetra-phenylporphine were as ${\sim}10^{-15}m^2/sec$ and that of adsorbed tetra-phenylporphine as ${\sim}10^{-11}m^2/sec$. The counter-diffusivity of coronene determined from desorption process was smaller by ${\sim}10^5$ times than the diffusivity determined from adsorption process of a single species. The reduction of the determined counter-diffusivity of coronene in desorption process was explained by the cross of diffusion fluxes and build-up of high gradient of coronene in pore.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.463-463
• /
• 2012

ITRS (international technology roadmap for semiconductors)에 따르면 MOS(metal-oxide-semiconductor)의 CD (critical dimension)가 45 nm node이하로 줄어들면서 poly-Si/$SiO_2$를 대체할 수 있는 poly-Si/metal gate/high-k dielectric이 대두된다고 보고하고 있다. 일반적으로 high-k dielectric를 식각시 anisotropic 한 식각 형상을 형성시키기 위해서 plasma를 이용한 RIE (reactive ion etching)를 사용하고 있지만 PIDs (plasma induced damages)의 하나인 PIED (plasma induced edge damage)의 발생이 문제가 되고 있다. PIED의 원인으로 plasma의 direct interaction을 발생시켜 gate oxide의 edge에 trap을 형성시키므로 그 결과 소자 특성 저하가 보고되고 있다. 그러므로 본 연구에서는 이에 차세대 MOS의 high-k dielectric의 식각공정에 HDP (high density plasma)의 ICP (inductively coupled plasma) source를 이용한 원자층 식각 장비를 사용하여 PIED를 줄일 수 있는 새로운 식각 공정에 대한 연구를 하였다. One-monolayer 식각을 위한 1 cycle의 원자층 식각은 총 4 steps으로 구성 되어 있다. 첫 번째 step은 Langmuir isotherm에 의하여 표면에 highly reactant atoms이나 molecules을 chemically adsorption을 시킨다. 두 번째 step은 purge 시킨다. 세 번째 step은 ion source를 이용하여 발생시킨 Ar low energetic beam으로 표면에 chemically adsorbed compounds를 desorption 시킨다. 네 번째 step은 purge 시킨다. 결과적으로 self limited 한 식각이 이루어짐을 볼 수 있었다. 실제 공정을 MOS의 high-k dielectric에 적용시켜 metal gate/high-k dielectric CMOSFETs의 NCSU (North Carolina State University) CVC model로 구한 EOT (equivalent oxide thickness)는 변화가 없으면서 mos parameter인 Ion/Ioff ratio의 증가를 볼 수 있었다. 그 원인으로 XPS (X-ray photoelectron spectroscopy)로 gate oxide의 atomic percentage의 분석 결과 식각 중 발생하는 gate oxide의 edge에 trap의 감소로 기인함을 확인할 수 있었다.

• Journal of Pharmaceutical Investigation
• /
• v.26 no.3
• /
• pp.221-232
• /
• 1996

An abrasive, calcium hydrogen phosphate dihydrate (DCPD), was synthesized in a Box-wilson experimental design by reactions between phosphoric acid and milk of lime, and calcium chloride and sodium phosphate solutions, and stabilized with TSPP and TMP. The optimum conditions for preparation of DCPD from phosphoric acid with milk of lime were such as; reaction temp.; $51.9^{\circ}C$, conc. of lime; 25.9%, conc. of phosphoric acd; 77.9%, drying temp.; $60.2^{\circ}C$ and final pH; 6.46. The physico-chemical and pharmaceutical properties of DCPD were showed as follows: glycerin absorption value(68 ml/100g), whiteness(99.5%), particle size(10.9 nm), pH(7.8), and set test(pass). XRD and SEM of DCPD indicated a monoclinic system crystallographically. $N_2$ adsorption isotherm curve by BET showed non porous type II form. The micromeritic parameters of DCPD showed that surface area was $3.27{\sim}4.6\;cm^{2}/g$ and pore volume, pore area and pore radius were negligible. The rheogram of the toothpaste containing DCPD showed pseudoplastic flow with yield value of 321, and thixotropic behavior forming hysteresis loop. These results meet the requirements as abrasive standard, and sythesized DCPD is expected as a good dental abrasive such as a high quality grade in practice.

• Korean Chemical Engineering Research
• /
• v.55 no.6
• /
• pp.854-860
• /
• 2017

PSf/D2EHPA/CNTs beads were prepared by immobilizing extractant di-(2-ethylhexyl)- phosphoric acid (D2EHPA) and adsorbent carbon nanotubes (CNTs) on polysulfone (PSf), and the adsorption characteristics of Sr(II) on the beads were studied. The morphological characteristics of the prepared PSf/D2EHPA/CNTs beads were observed by scanning electron microscopy (SEM), thermo gravimetric analysis (TGA), and Fourier transform infrared spectrometer (FTIR). The equilibrium time for the removal of Sr(II) by PSf/D2EHPA/CNTs beads was 60 min. The experimental kinetic data followed pseudo-second-order model more than pseudo-first-order kinetics model. The maximum removal capacity of Sr(II) obtained from Langmuir isotherm was 4.75 mg/g. The removal efficiencies of Sr (II) by PSf/D2EHPA/CNTs beads were improved 2.5 times by adding the adsorbent CNTs more than by using only the extractant D2EHPA.

• Food Science and Preservation
• /
• v.12 no.1
• /
• pp.54-61
• /
• 2005

The absorption characteristics and their physical properties of hot air, vacuum and freeze dried soybean curd powder were investigated. Absorption conditions were at 5, 15, and 25 t with $0.11\~0.93$ water activities. Equilibrium moisture content and the monolayer moisture content determined by prediction models showed highest value in the freeze dried soybean curd powder due to porous structure. Absorption energy decreased with increasing water activity was not affected by drying method. In the comparisons of the isothermal absorption models, Oswin model generally was the best fit model for isothermal adsorption of soybean curd powder.

• Journal of the Korean Chemical Society
• /
• v.16 no.6
• /
• pp.341-348
• /
• 1972

The significance of the curvature dependency correction of surface tension is studied in calculating the pore volume distribution of porous adsorbent from nitrogen adsorption isotherm. That is, Kelvin radii are calculated with curvature dependent surface tension values calculated by Chang et al, and then with these Kelvin radii, pore volume distributions of three porous adsorbents, silica alumina (steam deactivated), silica gel (Davidson 59), and silica gel (Mallinc-krodt Standard Luminescent), are calculated. The results are compared with those obtained by the previous method in which surface tension is taken as constant and also with the others. obtained by the modelless method proposed by Brunauer et al. The maximum point of the distribution curve shift to the larger pore radius, when the curvature dependency is considered. Furthermore, the relative pressure at which capillary condensation commences is by far the lower than that accepted previously. This effect becomes significant as the pore radius approaches to the micropore range.