• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.184-184
• /
• 2006

We have succeeded in the preparation of high molecular weight polybenzimidazoles by solution polycondensation of 3,3'-diaminobenzidine tetrahydrochloride with isophthalic acid, terephthalic acid, or with their derivatives using polyphosphoric acid both as solvent and as condensing agent. Also, we modified phosphoric acid into fluoroalkyl-phosphonic acids[F-PA]. The main reasons are as follows, first of all F-PAs are stronger acids than PA and alkylphosphonic acids which should promote proton hopping and transport. In addition, F-PA has weaker adsorption onto Pt which help to prevent electrocatalyst poisoning and promote higher oxygen reduction activity. The ionic conductivity of 85%-H3PO4 doped membranes show $10^{-2}\;Scm^{-1}\;to\;3{\times}10^{-2}\;Scm^{-1}\;at\;150^{\circ}C$ MEA with 2 %-added electrolyte shows slightly higher cell voltage than the others.

• 폴리머
• /
• 제24권5호
• /
• pp.589-598
• /
• 2000

불포화 폴리에스테르(unsaturated polyester : UPE) 수지를 다가알콜 (propylene glycol : PG, neopentyl glycol : NPG)의 각 몰비를 조정하여 포화 이염기산(isophthalic acid : IPA)과 불포화 이영기산 (maleic anhydride : MA)의 혼합물로 축합반응으로 제조하였다. 고체의 표면특성을 결정짓는 임계표면장력(${\gamma}_{c}$)을 Zisman plot으로 평가하였고, 또한 수지의 구조와 물성과의 관게를 레올로지 측정으로 조사하였다. 고체 glass에 의한 (${\gamma}_{c}$)은 UPE 수지 액체들에 대해서 30.5mN${\cdot}m^{-1}$를 얻었고, PG/NPG 몰비중 NPG 함량이 증가할수록 UPE 수지 용액의 접촉각과 표면장력이 감소됨을 확인할 수 있었다. 그리고 글리콜 몰비가 다른 UPE 수지의 동적 점탄성을 측정하면 정상류 점도의 전단속도 의존성, 동적 탄성율의 각 주파수 의존성에 의해 순수한 PG보다는 NPG의 함량이 증가할수록 낮은 값을 얻을 수 있었다.

• 폴리머
• /
• 제35권5호
• /
• pp.472-477
• /
• 2011

다중벽 탄소나노튜브(MWNT)의 표면이 산성기로 처리된 MWNT가 polyacrylonitrile(PAN) 섬유의 열적, 기계적 물성에 미치는 영향을 알아 보고자 질산, 황산으로 처리한 MWNT(O-MWNT)를 디아조늄염 반응을 이용하여 MWNT 표면에 이소프탈산(isophthalic acid)을 추가로 도입하였다. O-MWNT와 비교하여 볼 때 이소프탈산으로 처리된 MWNT(IPA-MWNT)가 극성용매 내에서 더 우수한 분산 안정성을 나타내었으며 이를 호모 PAN과 혼합하여 필름을 제조한 후 공기 중에서 열안정화 반응을 모사하였을 때 호모 PAN과 비교시 발열량이 감소하였다. PAN 공중합체와 IPA-MWNT를 혼합한 용액을 전도성 수조 콜렉터를 이용하여 전기방사를 한 결과 연속상의 배향된 섬유제조가 가능하였다. 1 wt%의 IPA-MWNT를 포함한 연속상의 전기방사된 PAN 섬유는 순수한 PAN 섬유와 비교하여 볼 때 인장강도가 100% 증가하였으며, 탄성률은 160% 증가되었다.

• Toxicological Research
• /
• 제27권4호
• /
• pp.191-203
• /
• 2011

There has been growing concern about the toxicity of phthalate esters. Phthalate esters are being used widely for the production of perfume, nail varnish, hairsprays and other personal/cosmetic uses. Recently, exposure to phthalates has been assessed by analyzing urine for their metabolites. The parent phthalate is rapidly metabolized to its monoester (the active metabolite) and also glucuronidated, then excreted. The objective of this study is to evaluate the toxicity of phthalic acid (PA), which is the final common metabolic form of phthalic acid esters (PAEs). The individual PA isomers are extensively employed in the synthesis of synthetic agents, for example isophthalic acid (IPA), and terephthalic acid (TPA), which have very broad applications in the preparation of phthalate ester plasticizers and components of polyester fiber, film and fabricated items. There is a broad potential for exposure by industrial workers during the manufacturing process and by the general public (via vehicle exhausts, consumer products, etc). This review suggests that PA shows in vitro and in vivo toxicity (mutagenicity, developmental toxicity, reproductive toxicity, etc.). In addition, PA seems to be a useful biomarker for multiple exposure to PAEs in humans.

• Elastomers and Composites
• /
• 제54권4호
• /
• pp.321-329
• /
• 2019

A series of poly(hyroxyamide)s (PHAs) was prepared by direct polycondensation reaction of 4,4'-(2,3-pyridinedioxy)dibenzoic acid and/or isophthalic acid with 3,3'-dihydroxybenzidine. The yield percentages of the products were high, and the inherent viscosities of the polymer in DMAc solution at 35℃ were 0.31-0.59 dL/g. All PHA polymers were found to be soluble in polar aprotic solvents such as DMAc, DMSO, NMP, and DMF. On the other hand, LiCl was required to dissolve IPHA-1 in aprotic solvents. Poly(benzoxazole)s (PBOs) were partially soluble in conc-H₂SO₄; IPBO-4, -5, and -6 were partially soluble in NMP only when LiCl was added to the solution, and the solution was heated. The PBO polymers showed a maximum weight loss in the temperature range of 654-680℃, and the char yields at 900℃ under nitrogen atmosphere exceeded 63%.

• Elastomers and Composites
• /
• 제55권3호
• /
• pp.205-214
• /
• 2020

A series of wholly aromatic polyhyroxyamide (PHA) copolymers were prepared by direct polycondensation reaction of isophthalic acid and diacids containing bulky units with 3,3'-dihydroxybenzidine. The inherent viscosities of the PHAs measured at 35℃ in DMAc solution were in the range of 0.31-0.56 dL/g. The solubility study revealed that the PHAs were readily soluble in aprotic solvents such as, dimethylacetamide (DMAc), dimethyl sulfoxide (DMSO), and N-methyl-2-pyrrolidone (NMP) at room temperature and in less polar solvent such as pyridine. However, the polybenzoxazole (PBO) copoymers were quite insoluble in all organic solvents except partially soluble in concentrated sulfuric acid and partially soluble in NMP containing LiCl. The PBO copolymers showed maximum weight loss temperature in the range of 593-632℃ and high char yields in the range of 65.0-71.2% at 900℃ in a nitrogen atmosphere.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.87-98
• /
• 2018

The production of IPA from the oxidation of MX is completed under the catalysis of $H_3PW_{12}O_{40}$ (HPW) loaded on carbon and cobalt. Oxalic acid is tried to modify the carbon to upgrade the catalytic activity of HPW@C catalyst. The experiments show that the best carbon is acquired by carbonizing the carbon at $450^{\circ}C$ for 2 h in $N_2$ after being soaked in a $0.20mol\;l^{-1}$ oxalic acid solution for 16 h. The IPA produced by the HPW@C catalysts prepared with the carbon modified is 58.9% over that obtained by the catalysts prepared with the original carbon.

• 폴리머
• /
• 제35권6호
• /
• pp.593-598
• /
• 2011

본 연구에서는 전바나듐 레독스-흐름 전지용 음이온교환막의 제조를 위하여 isophthalic acid (IPA), 1,6-hexanediol(HDO), terephthalic acid(TPA), maleic anhydride(MA)의 용융 축합중합 방법에 의해 IPA-co-HDO-co-(TPA/MA)(IHTM) 공중합체를 합성하였다. 합성된 IHTM 공중합체 아민화 반응을 trimethylamine으로 하였으며, UV 가교 반응을 통하여 음이온교환막을 제조하였다. IHTM 공중합체의 구조 및 열안정성을 FTIR, $^1H$ NMR, TGA 분석을 통하여 확인하였다. 또한 IHTM 음이온교환막의 함수율, 이온교환용량, 전기저항, 전기전도도를 중량법, 적정법 및 LCR 미터로 측정하였으며, 전바나듐 레독스-흐름 전지의 효율 실험을 하였다. 막의 이온교환용량, 전기저항, 전기전도도는 각각 1.10 meq/g, $1.98{\Omega}{\cdot}cm^2$, 0.009 S/cm로 우수하게 나타났으며, 전바나듐 레독스-흐름 전지의 충 방전효율, 전압효율 및 에너지효율은 각각 96.5, 74.6, 70.0%이었다.

• 한국생활과학회지
• /
• 제12권4호
• /
• pp.529-537
• /
• 2003

This study was conducted to manufacture the soluble micro-fiber and to synthesize low melting polymer for the interior fabric not to use the polyurethane resin causing some problems. Low melting polyester for weft yarn was introduced by adding 30-40 mol% ratio of isophthalic acid to a main chain of polyethylene terephthalate to decrease the melting temperature up to heat setting temperature. Micro-fiber for warp yarn consisted of both soluble and insoluble components with multi-layered structure. When the soluble micro-fiber was treated by alkaline hydrolysis with 3-5% concentration of NaOH, it showed the turning point at 28% weight loss since soluble polyester was hydrolyzed approximate five times faster than regular polyester.

• Macromolecular Research
• /
• 제17권11호
• /
• pp.901-906
• /
• 2009

Several aromatic optically active polyamides (PA)s were synthesized from 5-(2-phthalimidiylpropanoylamino)isophthalic acid with various aromatic diamines via direct polycondensation with triphenyl phosphite and pyridine in the presence of calcium chloride and N-methyl-2-pyrrolidone under microwave irradiation and conventional heating conditions. Under the optimized conditions, the reaction mixture was irradiated for 2 min. with a 100% irradiation power (900 W). The resulting polymers were obtained in high yield and moderate inherent viscosity ranging from 0.35 to 0.60 dL/g. All synthesized polymers showed excellent solubility in amide-type solvents. Thermogravimetric analysis revealed a 10% weight loss temperature and char yield at $600^{\circ}C$ in a nitrogen atmosphere of > $350^{\circ}C$ and > 58%, respectively, which suggests that the resulting PAs have good thermal stability.