• 제목/요약/키워드: Isolation Level

검색결과 798건 처리시간 0.036초

Isolation and identification of mammalian orthoreovirus type 3 from a Korean roe deer (Capreolus pygargus)

  • Yang, Dong-Kun;An, Sungjun;Park, Yeseul;Yoo, Jae Young;Park, Yu-Ri;Park, Jungwon;Kim, Jong-Taek;Ahn, Sangjin;Hyun, Bang-Hun
    • 대한수의학회지
    • /
    • 제61권2호
    • /
    • pp.13.1-13.8
    • /
    • 2021
  • Mammalian reovirus (MRV) causes respiratory and intestinal disease in mammals. Although MRV isolates have been reported to circulate in several animals, there are no reports on Korean MRV isolates from wildlife. We investigated the biological and molecular characteristics of Korean MRV isolates based on the nucleotide sequence of the segment 1 gene. In total, 144 swabs from wild animals were prepared for virus isolation. Based on virus isolation with specific cytopathic effects, indirect fluorescence assays, electron microscopy, and reverse transcription-polymerase chain reaction, only one isolate was confirmed to be MRV from a Korean roe deer (Capreolus pygargus). The isolate exhibited a hemagglutination activity level of 16 units with pig erythrocytes and had a maximum viral titer of 105.7 50% tissue culture infectious dose (TCID50)/mL in Vero cells at 5 days after inoculation. The nucleotide and amino-acid sequences of the partial segment S1 of the MReo2045 isolate were determined and compared with those of other MRV strains. The MReo2045 isolate had nucleotide sequences similar to MRV-3 and was most similar (96.1%) to the T3/Bat/Germany/342/08 strain, which was isolated in Germany in 2008. The MReo2045 isolate will be useful as an antigen for sero-epidemiological studies and developing diagnostic tools.

IM(Integrated Magnetics) 방식을 이용한 Three-Level 컨버터의 자기회로 해석에 관한 연구 (The analysis of magnetic circuit for the Three-Level converter using IM(Integrated Magnetics))

  • 배진용;김용;권순도;조규만;이규훈;최근수
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2007년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
    • /
    • pp.218-222
    • /
    • 2007
  • This paper present the Three-Level converter for high power application. In converter system, magnetic components are important devices used for energy storage, energy transfer, galvanic isolation and filtering. The proposed Three-Level converter is to reduce the number of magnetic components. The secondary rectification was discussed by a single core transformer winding. The result of the analysis are verified using 1kW prototype.

  • PDF

흰쥐 조직에서의 카드뮴 결합 고분자량 단백질의 유도 (Induction of Cd-binding High Molecular Weight Protein in Rat Tissues)

  • 천기정;김봉희
    • 약학회지
    • /
    • 제41권3호
    • /
    • pp.352-358
    • /
    • 1997
  • The study was carried out on the biochemical characters of Cd-BP(I) after isolation and purification of the protein from the liver of rat injected intraperitoneally with Cd. A c ontinued study has been doing whether Cd-BP(I) could be induced by Cd or by other metals such as Zn and Cu. Antisera were made against the Cd-BP(I) from NewZealand white rabbits. Carried out were ${\gamma}$-globulin purification, then Ouchterlony test adn gel immunodiffusion test. Cd-BP(I) was also found in normal tissues of rat. It was induced up to a considerable level by Cd, whose induced level was higher than that of Cu or Zn treatment. The level of induction by Cu or Zn pretreatment plus Cd treatment was lower than that by simple treatment of Cu or Zn. Such a result was presumably related to the Cd toxicity.

  • PDF

IM(Integrated Magnetics) 방식을 이용한 Three-Level 컨버터 (The Three-Level Converter using IM(Integrated Magnetics) method)

  • 배진용;김용;권순도;엄태민
    • 조명전기설비학회논문지
    • /
    • 제22권4호
    • /
    • pp.35-45
    • /
    • 2008
  • 본 논문에서는 대용량 출력에 적합한 Three-Level 컨버터에 대하여 논하였다. 전력 변환 시스템에서 에너지의 저장, 변환, 전기적 절연 및 필터 등을 위한 자성체의 적절한 설계는 매우 중요하다. 제안된 Three-Level 컨버터는 출력단 인덕터와 변압기의 결합을 통하여 자성체의 수를 저감하였다. 본 연구에서는 Three-Level 컨버터에서 자기회로 해석을 기반으로한 릴럭턴스 모델을 제안하고자 한다. 또한, 단일 코어 변압기 결선에 의한 2차측 정류방식에 대하여 논하고자 한다. 본 연구에서는 IGBT를 사용하여 입력 540[V], 출력 48[V], 3[kW]급 시스템을 제작했으며 40[kHz]에서 실험하였다.

n-type GaN 위에 형성된 Ti/Al/Mo/Au 및 Ti/Al/Ni/Au 오믹 접합의 isolation 누설전류 분석

  • 황대;하민우;노정현;최홍구;송홍주;이준호;박정호;한철구
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
    • /
    • pp.266-267
    • /
    • 2011
  • 질화갈륨(GaN)은 높은 전자이동도 및 높은 항복전계를 가지며 낮은 온저항으로 인하여 에너지효율이 우수하기 때문에 고출력 전력소자 분야에서 많은 관심을 받고 있다. GaN을 이용한 고출력 전력소자의 경우 상용화 수준에 근접할 만한 기술적 진보가 있었으나, 페르미 레벨 고정(Fermi-level pinning) 현상, 소자의 누설전류 등 아직 해결되어야 할 문제를 갖고 있다. 본 연구에서는 실리콘 기판 위에 성장된 GaN 에피탁시를 활용한 고출력 전력소자의 누설전류를 억제시키기 위해 오믹 접합 중 Au의 상호확산을 억제하는 중간층 금속(Mo or Ni)을 변화시켰으며 오믹 열처리 온도에 따른 특성을 비교 연구하였다. $Cl_2$$BCl_3$를 이용하여 0.6 ${\mu}m$ 깊이의 메사 구조가 활성영역을 형성하였고, Si 도핑된 n-GaN 위에 Ti/Al/Mo/Au (20/100/25/200 nm) 와 Ti/Al/Ni/Au (20/100/25/200 nm) 오믹 접합을 각각 설계, 제작하였다. 오믹 열처리시의 GaN 표면오염을 방지하기 위해 $SiO_2$ 희생층을 증착하였다. 오믹 접합 형성을 위해 각 750$^{\circ}C$, 800$^{\circ}C$, 850$^{\circ}C$에서 30초간 열처리를 진행 하였으며, 이후 6 : 1 BOE 용액으로 $SiO_2$ 희생층을 제거하였다. 750, 800, 850$^{\circ}C$에서 Ti/Al/Mo/Au 구조의 오믹 접합 저항은 각 2.56, 2.34, 2.22 ${\Omega}$-mm 이었으며, Ti/Al/Ni/Au 구조의 오믹 접합 저항은 각 43.72, 2.64, 1.86 ${\Omega}$-mm이었다. Isolation 누설전류를 측정하기 위해서 두 개의 오믹 접합 사이에 메사 구조가 있는 테스트 구조를 제안하였다. Isolation 누설전류는 Ti/Al/Mo/Au 구조에서 두 오믹 접합 사이의 거리가 25 ${\mu}m$이고 100 V일 때 750, 800, 850 $^{\circ}C$의 열처리 온도에서 각 1.25 nA/${\mu}m$, 2.48 nA/${\mu}m$, 8.76 nA/${\mu}m$이었으며, Ti/Al/Ni/Au 구조에서는 각 1.58 nA/${\mu}m$, 2.13 nA/${\mu}m$, 96.36 nA/${\mu}m$이었다. 열처리 온도가 증가하며 오믹 접합 저항은 감소하였으나 isolation 누설전류는 증가하였다. 750$^{\circ}C$ 열처리에서 오믹 접합 저항은Ti/Al/Mo/Au 구조가 Ti/Al/Ni/Au 구조보다 약 17배 우수하였고, 850$^{\circ}C$ 고온의 열처리 경우 Ti/Al/Mo/Au 구조의 isolation 누설전류는 8.76 nA/${\mu}m$로 Ti/Al/Ni/Au의 누설전류 96.36 nA/${\mu}m$보다 약 11배 우수하였다. Ti/Al/Mo/Au가 Ti/Al/Ni/Au 보다 오믹 접합 저항과 isolation 누설전류 측면에서 전력용 GaN 소자에 적합함을 확인하였다.

  • PDF

Factors Predicting Early Release of Thyroid Cancer Patients from the Isolation Room after Radioiodine-131 Treatment

  • Fatima, Nosheen;Zaman, Maseeh uz;Zaman, Areeba;Zaman, Unaiza;Tahseen, Rabia;Shahid, Wajiha
    • Asian Pacific Journal of Cancer Prevention
    • /
    • 제17권1호
    • /
    • pp.125-129
    • /
    • 2016
  • Background: Patients with differentiated thyroid cancers (DTC) who receive radioactive iodine-131 (RAI) are released from isolation when their dose rate is below the regulatory requirements. The purpose of this study was establish predicting factors for early release from the isolation facility after RAI administration in patients with DTC. Materials and Methods: This was a prospective study which included 96 (58 females and 38 males) patients with DTC who had received RAI from April 2013 till August 2015. The study was duly approved by the ethical committee of the institute. Patients who had complete information of primary tumor size (PTS), serum TSH, stimulated thyroglobulin level [sTg] with antibodies (IU/ml) at the time of RAI treatment were included. All had a normal serum creatinine level. To attain lower effective half-life good hydration and administration of soft laxative were ensured. Dose rate was measured (immediately, 24 h and 36 h) at 1 meter distance from anterior mid trunk and a dose rate <$50{\mu}Sv/h$ was considered as the releasing criterion. At 24 h 50 patients were released while the remaining 46 patients were released at 36 h. A post-ablative whole body scan (PA-WBIS) was performed 5-8 days after RAI ablation in all patients. Results: Patients released after 24 h were significantly younger, had smaller lesions with higher proportion of papillary cancer, lower sTg, lower sTg/TSH ratio and had received a lower dose of RAI as comapred to those who were discharged after 36 h. Serum TSH and gender were not found to have any significant correlation between two cohorts. ROC and multivariate analysis have shown age ${\leq}37years$, PTS ${\leq}3.8cm$, $RAI{\leq}150mCi$, $sTg{\leq}145ng/ml$ and $sTg/TSH{\leq}1.085$ as strong indepedent predictors for early release. Conclusions: We conclude that younger age (${\leq}37years$), smaller tumor size (${\leq}3.8cm$), lower RAI dose (${\leq}150mCi$), lower sTg (${\leq}145ng/ml$) and a lower sTg/TSH ratio (${\leq}1.085$) are significant independent predictors for release at 24 h after RAI treatment in DTC patients. Effective utilization of these factors could help the treating physicians to use limited number of internment facilities with higher throughput, lower cost and lower psychological stress to patients.

Implementation of a ZVS Three-Level Converter with Series-Connected Transformers

  • Lin, Bor-Ren
    • Journal of Power Electronics
    • /
    • 제13권2호
    • /
    • pp.177-185
    • /
    • 2013
  • This paper studies a soft switching DC/DC converter to achieve zero voltage switching (ZVS) for all switches under a wide range of load condition and input voltage. Two three-level PWM circuits with the same power switches are adopted to reduce the voltage stress of MOSFETs at $V_{in}/2$ and achieve load current sharing. Thus, the current stress and power rating of power semiconductors at the secondary side are reduced. The series-connected transformers are adopted in each three-level circuit. Each transformer can be operated as an inductor to smooth the output current or a transformer to achieve the electric isolation and power transfer from the input side to the output side. Therefore, no output inductor is needed at the secondary side. Two center-tapped rectifiers connected in parallel are used at the secondary side to achieve load current sharing. Due to the resonant behavior by the resonant inductance and resonant capacitance at the transition interval, all switches are turned on at ZVS. Experiments based on a 1kW prototype are provided to verify the performance of proposed converter.

13.2kV급 반도체 변압기의 초기 기동을 위한 배터리 기반 셀프 전원 장치 (Self power equipment on battery for initial starting of 13.2kV SST(Solid State Transformer))

  • 임정우;조영훈
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2016년도 전력전자학술대회 논문집
    • /
    • pp.255-256
    • /
    • 2016
  • This paper is presents a initial starting of SST with high voltage level source. Rush current flowing as difference between capacitor level and grid level can crush the whole system. Thus, industries have used initial constituted by resistance and relay. However the initial circuit used in industries can't apply high voltage application due to isolation and economic feasible problems. Therefore many countries study method can charge capacitor with another voltage sources. Also this paper introduce method charging primary side capacitor efficiently.

  • PDF

가역 전력변환기의 인버터 설계 (A Inverter Design of Reversible Power Converter)

  • 전중함;이현우;백수현;곽동걸
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2005년도 춘계학술대회논문집
    • /
    • pp.8-13
    • /
    • 2005
  • In this paper discusses single-phase DC-AC Inverter design of reversible power converter that driven by binary combination at different transformer winding ratio by BCD code level. It has a advantage that constructs a control system simply and obtain load current of good quality without filter circuit and free from noise or isolation for lower switching frequency. In this research, study on current type converter and inverter circuit that consist for possibility of AC-DC/DC-AC multi-level reversible converter.

  • PDF

공동주택에서의 바닥충격음 인지도 분석 (The Analysis of Perceptual Levels For Floor Impact Noises in Apartments)

  • 김경호;전진용
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2002년도 춘계학술대회논문집
    • /
    • pp.598-603
    • /
    • 2002
  • The floor impact noise in apartment buildings has been known as the most sensitively recognized environmental noise. Therefore. inhabitants perceptual evaluation of floor impact noises was investigated by a questionnaire survey. It was found that the respondents perceive the floor impact noises from the upper nor as a constant noise level. However, if there is any child on the upper floor. the respondents felt Its noise as a harshly grating level. It was also found that the larger the respondents house is. the higher their wanted level of noise isolation is. Moreover, it was revealed that the main source of the floor impact noise from the upper floor is a child at the age from six to seven. The results could be used as fundamental data for the research on impact sources and new regulations that fit to Korean perceptual aspects and characteristics.

  • PDF