• Journal of Periodontal and Implant Science
• /
• 제31권2호
• /
• pp.333-344
• /
• 2001

The present study was performed to evaluate the effect of tetracycline - HCl on the change of implant surface microstructure according to application time. Implants with pure titanium machined surface and titanium plasma-sprayed surface were utilized. Implant surface was rubbed with 50mg/ml tetracycline - HCl solution for 1 min., $1\frac{1}{2}\;min$., 2 min., $2\frac{1}{2}\;min$. and 3min. respectively in the test group and with saline for 1 min. in the control group. Then, the specimens were processed for scanning electron microscopic observation. The following results were obtained. 1. Pure titanium machined surfaces conditioned with saline for 1 min., showed a few shallow grooves and ridges and were less irregular. 2. Pure titanium machined surfaces conditioned with 50mg/ml tetracycline - HCl solution showed more irregular and corrosive surfaces compared to the control group irrespective of the application time of tetracycline - HCl solution. 3. Titanium plasma-sprayed surfaces conditioned with saline for 1 min., were deposited with round amorphous particles and showed round or irregular pores that can be connected to each other. 4. The irregularity of titanium plasma-sprayed surfaces conditioned with 50mg/ml tetracycline - HCl solution was lessened and the flattened areas were wider relative to the application time of tetracycline - HCl solution. 5. Titanium plasma-sprayed surfaces conditioned with tetracycline - HCl solution for 1 min. and $1\frac{1}{2}\;min$. were very similar to that of the control group, but the surfaces conditioned for 2 min., $2\frac{1}{2}\; min$. and 3 min. were changed. In conclusion, pure titanium machined surfaces were changed irrespective of the application time of tetracycline - HCl solution. And titanium plasma-sprayed surfaces conditioned with tetracycline - HCl solution began to be changed from $1\frac{1}{2}\;min$. This results will be applicable to the regenerative procedures for peri-implantitis treatment.

• 한국동물위생학회지
• /
• 제21권1호
• /
• pp.67-77
• /
• 1998

The bovine fat necrosis is often seen as an incidental lesion in the adipose tissues of the abdominal cavity. Most of affected animals, however, have been detected at the slaughter house or routine necropsy. The purpose of this study was to examine the occurrence and distribution of abdominal fat necrosis in Korean native cattle, and its pathologic features. Postmortem inspection at an Chonju abattoir during a three-month period in 1997 detected at necrosis lesions in 67(6.6%) of the 1,012 animals received for slaughter. The occurrence was mainly in alimentary tracts and perirenal. Both sexes were affected, but the lesion were predominantly occurred in female. Gross lesions were white or yellowish in color and formed hard lumps irregular in shape ranging from small nodules to large solid masses. On the cut surface, lesions were occasionally seen chalky calcified granules and some of the lesions contained oil-like fluid. The surface of irregular shaped masses constricted kidneys and intestinal loops. Microscopically, the masses were encapsulated by thickened fibrous tissue, which infiltrated deeply and divided them into many irregular lobules. Initial lesions presented mild inflammatory cell and fibrous proliferation. It became fibroplasia in progressive lesions and resembled chronic lesion, eventhough no grossly apparent inflammatory reaction. The hard consistency of masses, due to fibroplasia, can compress the intestines, urinary organs, and reproductive organs.

• 한국CDE학회논문집
• /
• 제19권2호
• /
• pp.91-102
• /
• 2014

The outer surface of an irregular structure contains panels with two-directional curvature called NURBS. To construct these forms of exterior materials, complex geometric surface should be divided into forms and sizes that can be manufactured and constructed. Because the bigger the curvatures of these divided exterior panel, the more expensive the construction costs, these complex two-directional curvatures should go through optimal process of reinterpretation to minimize the curved surfaces with complex two-directional curvatures. Yet, to gain higher ground in technological competition in the field of irregular structure construction, companies do not share know-how that they obtained. Accordingly, small construction and design companies have trouble calculating even rough estimate and cannot adjust expected construction cost based on comparison of design alternatives. Given this situation, this study conducted the research that can support decision-making in the design stage of the construction and provide basic material for optimal range to reduce manufacturing cost by the minimizing the distorted plane of the irregular structure.

• 비파괴검사학회지
• /
• 제35권1호
• /
• pp.52-60
• /
• 2015

원자력발전소에는 탄소강과 스테인리스강 용접을 위해 alloy600 용접재를 적용한 이종금속용접부가 다수 존재하며, 전 세계적으로 이종금속용접부에서 결함 발생 보고가 지속되고 있다. 주기적인 건전성 평가를 위해 이종금속용접부 초음파검사 일반절차서 (KPD-UT-10)를 적용하여 검사를 수행하고 있으며, 검사절차서에서는 탐촉자와 검사체 표면 사이의 간격을 최대 1/32"(0.8mm) 이내로 제한하고 있다. 국내의 일부 이종금속용접부는 테이퍼진 형상과 불규칙한 표면 형상을 가지고 있어, 가변형 위상배열초음파기술을 적용하여 검사 신뢰성을 높이고자 본 연구를 수행하였다. 연구 결과, 검사체 표면이 불규칙한 시편 내부의 인공결함에 대한 검출이 양호하였고, 이를 통해, 가변형 위상배열초음파기술의 현장 적용 가능성을 확인하였다.

• 분석과학
• /
• 제25권6호
• /
• pp.345-349
• /
• 2012

Polysilane black powders were synthesized by sonochemical methods from silicon tetrachloride with sodium metal with 37.0% yield. Those black powder materials were found to have fibrous or irregular shapes with round surface. It was found that thermal behaviors of those polysilane black powders were similar to that of hydropolysilanes which was reported earlier. After thermal treatment, black polysilicon was obtained with 57.1% residue yield, and those fibrous or irregular shapes with round surface were intact but lots of small cavities were formed indicating porous structure, and found to be an amorphous state from XRD analysis.

• 한국임상수의학회지
• /
• 제17권1호
• /
• pp.129-133
• /
• 2000

Based on pathological findings, 5 German shepherds, revealed a mean age of 7.6 years, showing no clinical signs were diagnosed as tracheopathia osteochondroplastica(TOC). Grossly, multiple small-sizecd nodules, appeared as cobble-stones, on the cartilage rings situated in the anterior trachea and the mucosal surface of the epiglottis were showed. Numerous tiny nodules were scattered on the pleural surface of the lung. The vascular walls of the heart were irregular and coarse apearance with calcification. Histopathologically, nodules in the trachea represented an irregular expansion of the underlying tracheal ring with protrusion into the submucosa and consisted of proliferated and calcified cartilage and bone with marrow spaces containing numbers of hematopoietic cells. Pulmonary calcinosis and calcification of the vascular walls of the heart were observed. Our observations suggested that TOC arises form eccondroses and exostoses of the tracheal cartilage rings.

• Applied Microscopy
• /
• 제19권2호
• /
• pp.17-26
• /
• 1989

The cells of Campylobacter jejuni treated with physical or chemical disinfection agents were comparatively examined by scanning and transmission electron microscopies for their morphological features and internal ultrastructures. The normal cells of C. jejuni, showed typical spiral rod shapes. The ribosomes, nucleoids, and other cellular constituents were observed to be distributed evenly throughout the cytoplasm. The cells treated with heat or UV-light were changed to spherical or irregular shapes and their cell envelopes were destroyed to form ghost cells by liberating their cytoplasmic components. The cells treated with chlorine or monochloramine were also changed into irregular round shapes. The chlorinated cells showed very rough surface structures with many blob-like protrusions, while the surface of the monochloramine-treated cells appeared to be relatively smooth.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.333-338
• /
• 2001

Fractal geometry is a non-Euclidean geometry which has been developed to quantitative analysis irregular or fractional shapes. Fractal dimension of irregular surface has fractal values ranging from 2 to 3 and of irregular line profile has fractal values ranging from 1 to 2. In this paper, quantitative analysis of crack growth patterns during the fracture processing of fiber-reinforced cement composites based on fractal geometry. The fracture behaviors of fiber reinforced mortar beams subjected to three-point loading in flexure. The beams all had a single notch depth, but varing volume fractions of polypropylene, cellulose fibers. The crack growth behaviors, as observed through the image processing system, and the box counting method was used to determine the fractal dimension, Df. The results showed that the linear correlation exists between fractal dimension and fracture energy of the fiber reinforced cement mortar.

• 수산해양기술연구
• /
• 제44권1호
• /
• pp.46-56
• /
• 2008

A numerical model analysis was performed to analyze the motion and mooring tension response of submersible fish cage systems in irregular waves and currents. Two systems were examined: a submersible cage mooring with a single, high tension mooring and the same system, but with an additional three point mooring. Using a Morison equation type model, simulations of the systems were conducted with the cage at the surface and submerged. Irregular waves(JONSWAP spectrum) with and without a co-linear current with a magnitude of 0.5m/s were simulated into the model as input parameters. Surge, heave and pitch dynamic calculations were made, along with tension responses in the mooring lines. Results were analyzed in both the time and frequency domains and linear transfer functions were calculated.

• 한국측량학회지
• /
• 제12권2호
• /
• pp.209-218
• /
• 1994

본 연구는 최근 그 활용도가 증대되어 가는 수치지형모형의 한 형태인 불규칙삼각망을 생성하고자하는 연구이다. 일반적으로 격자형 수치표고모형과 불규칙삼각망은 지형문제를 해결하기 위한 합리적인 방법이다. 그러나, 불규칙삼각망이 격자형 수치표고모형에 비해 자료의 저장이 용이하고, 불규칙한 간격을 가지는 표고 자료를 운용할 수 있는 편리한 자료구조를 가지고 있기 때문에 격자형 수치표고모형의 대안이 될 수 있다. 격자형 수치표고모형으로부터 불규칙삼각망을 생성하는 다양한 방법들이 제시되고, 이러한 자료를 바탕으로 최적의 삼각망을 생성하기 위한 여러 가지의 연산법이 소개되고 있다. 본 연구에서는 새로운 삼각망 생성의 접근방법으로 표고와 가변거리의 연산법을 이용하였고, 인접 문제점을 해결하기 위해 보간점과 임의의 선을 첨가시키므로서 보다 더 실제지형과 가까운 불규칙삼각망을 생성할 수 있었고, 또한 효율적인 자료기반 구축을 가능하게 하여 지형공간정보체계의 활용성을 증대시킬 수 있었다.