• The Korean Journal of Pain
• /
• 제26권1호
• /
• pp.62-64
• /
• 2013

Hemifacial spasm is defined as unilateral, involuntary, irregular twitching of all or parts of the muscles innervated by facial nerves. Here, we present a case of recurrent hemifacial spasm after microvascular decompression (MVD) treated with pulsed radiofrequency (PRF) treatment with good results. A 35-year-old woman suffered from recurrent hemifacial spasm after MVD that was refractory to medical treatment and botulinum toxin injections. We attempted a left facial nerve block twice. Then, we applied PRF at a maximum temperature of $42^{\circ}C$ for 120 sec. Some response was observed, so we applied PRF two additional times. The frequency of twitch decreased from 3-4 Hz to < 0.5 Hz, and subjective severity on a visual analogue scale also decreased from 10/10 to 2-3/10. PRF treatment might be an effective medical treatment for refractory hemifacial spasm and has fewer complications and is less invasive compared with those of surgery.

• 한국지역지리학회지
• /
• 제17권5호
• /
• pp.505-520
• /
• 2011

본 연구에서는 호우의 변화경향을 유역별로 분석하였다. 이를 위해 한국을 6개의 유역으로 나누고 호우와 관련된 7개의 극한강수지수를 분석하여 변화지속성을 파악하였다. 호우량은 호우일수보다 증가경향이 더 지속적이다. 일강수량이 50mm 이상 강수일수와 95 퍼센타일 이상 강수량의 증가경향이 가장 지속적이다. 호우관련지수는 분석기간 동안 대부분 증가경향이지만 한강 유역, 낙동강 상류지역, 동해안 지역이 다른 유역에 비해 증가경향이 뚜렷하다. 금강 유역과 섬진강 유역은 호우의 증가경향이 통계적으로 유의하지 않고 변동성이 크다. 호우의 증가경향은 1970년대 중반 이후 한강과 낙동강 유역에서 지속적이지만 2000년대 중반 이후 증가경향이 지속적으로 나타나는 지점들이 감소한다. 이는 최근 호우의 빈도와 강도가 더욱 불규칙해지고 있음을 의미한다.

• Transactions on Electrical and Electronic Materials
• /
• 제11권1호
• /
• pp.42-47
• /
• 2010

Polymer insulating materials such as cross linked polyethylene (XLPE) are employed in electric cables used for extra high voltage. These materials can degrade due to chemical, mechanical and electric stress, possibly caused by voids, the presence of extrinsic materials and protrusions. Therefore, this study measured discharge patterns, discharge phase angle, quantity and occurrence frequency as well as changes in XLPE under different temperatures and applied voltages. To quantitatively analyze the irregular partial discharge patterns measured, the discharge patterns were examined using a statistical program. A three layer sample was fabricated, wherein the upper and lower layers were composed of non-void XLPE, while the middle layer was composed of an air void and copper particles. After heating to room temperature and $50^{\circ}C$ and $80^{\circ}C$ in silicone oil, partial discharge characteristics were studied by increasing the voltage from the inception voltage to the breakdown voltage. Partial discharge statistical analysis showed that when the K-means clustering was carried out at 9 kV to determine the void discharge characteristics, the amount discharged at low temperatures was small but when the temperature was increased to $80^{\circ}C$, the discharge amount increased to be 5.7 times more than that at room temperature because electric charge injection became easier. An analysis of the kurtosis and the skewness confirmed that positive and negative polarity had counterclockwise and clockwise clustering distribution, respectively. When 5 kV was applied to copper particles, the K-means was conducted as the temperature changed from $50^{\circ}C$ to $80^{\circ}C$. The amount of charge at a positive polarity increased 20.3% and the amount of charge at a negative polarity increased 54.9%. The clustering distribution of a positive polarity and negative polarity showed a straight line in the kurtosis and skewness analyses.

• 한국멀티미디어학회논문지
• /
• 제5권4호
• /
• pp.415-425
• /
• 2002

본 논문에서는 웨이브릿 변환 영역에서 추출된 특징을 기반으로 한 내용기반 영상검색 방법에 관해 연구하였다. 기존의 웨이브릿 기반의 방법에서의 문제점인 특징벡터의 크기를 줄이기 위해 웨이브릿 계수의 영역별 에너지 값을 이용하였으며, 대상물의 이동, 회전, 크기 변화에 영향을 받지 않는 모멘트 특성을 이용한 검색방법을 제안하였다. 본 방법은 특징벡터의 크기를 줄이고, 기존의 특징벡터와 비교해서 검색시간을 단축하면서 분류검색의 효율성을 향상시켰다. 영역기반 영상검색 기능을 제공하기 위해 영상분할 방법에 대해 연구하였으며, 불규칙한 광원에 의한 영향을 최소화할 수 있는 영상분할 방법을 제안하였다 영상분할은 영역병합을 이용하였고, 병합후보영역은 웨이브릿 변환의 고주파 대역 에너지 값을 이용하여 선정하였다 분할된 영역정보를 이용하여 칼라와 질감, 모양 특징벡터를 구성하여 영역기반 영상검색을 수행하였다.

• Journal of Nutrition and Health
• /
• 제38권6호
• /
• pp.455-464
• /
• 2005

The study was designed to observe the correlation between the eating habits and growth development in 1,574 children (3-6 years old) in Kyunggi-do and Seoul, Korea. The eating habits and nutrient intake were determined by mini dietary assessment and food frequency questionnaire (FFQ). 35.6% children had been practicing an unbalanced diets. Children with unbalanced diet consumed less amount of protein source foods (meat, fish, egg, soy products), vegetables and fruits and had irregular meal time, but more of them preferred sweet foods (ice creme, cookies) and carbonated drinks as snack compared with children in balanced diet. 24-35% children consumed energy, iron (Fe), calcium (Ca), Niacin, Zinc (Zn) less than 75% RDA. Energy intake of children with unbalanced diet was not significantly different from those with balanced diet, but they consumed less amount of niacin, Fe, Ca and Zn than those with balanced diet. By using the relative percentage of standard weight-length-index (WLI), 65.7% children was normal weight, 12.9% was underweight, 13.4% was overweight and 7.9% was obese. However, 11.9% of underweight and normal weight children was so called thin obese since their body fat content was greater than 20%. There were 16.8% underweight in children with unbalanced diet and 12.6% underweight in those with balanced diet. Compared to normal weight, the underweight children significantly consumed less amount of milk and its product, high protein foods, fried foods and fruits, but obese children consumed more high protein source foods (meat, fish, egg, etc) and sweet foods. In conclusion, the eating habits of unbalanced meal was prevalent problem in preschool children which resulting in their health risks. Therefore, it would be needed that new approach for nutrition education to improve eating habits in preschoolers.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2017년도 학술발표회
• /
• pp.329-329
• /
• 2017

In this study attempted to evaluate the stability of the protection methods by examining hydraulic characteristics of the area around the point in which marine cable protector is installed such as surf zone occurrence point of shore-end submarine cables suitable for coastal marine environmental conditions, flow rate t the tope of the protector and maximum wave height, and to provide basic data for the selection of the optimal protection method. In performing hydraulic model experiments, the topography of submarine cable installation location was reproduced in 2-D sectional channel, and models appropriate for experimental scale and similitude law were produced and installed for each condition of submarine cables and protectors. Since the topography and submarine cable protectors were reproduced and installed in 2-D sectional channel, the exact reproduction of surf and transformation in shallow water zone was possible, and thus the physical properties could be clearly analyzed. For stability review, an experiment to examine the stability was conducted using a wave maker with 50-year frequency design waves as target, and wave height and cycles were applied based on the approximate lowest low water level(Approx. L.L.W), which is the most dangerous in submarine cable protection methods. As for experimental time, typhoon passing time in summer (about 3 hours) was applied, and wave patterns and deviation ratio of the submarine cable protector were investigated after making irregular waves corresponding to design waves. In addition, current meter and wave height meter were installed at the installation location of the submarine cable protector, and the flow rates and wave height at the top of the protector were measured and analyzed to review hydraulic properties.

• 한국표면공학회지
• /
• 제54권2호
• /
• pp.96-101
• /
• 2021

NaNbO₃:Eu³⁺ phosphor thin films were grown on quartz substrates by radio-frequency magnetron sputtering at a growth temperature of 100 ℃, with subsequent annealing at temperatures of 800, 900, and 1000 ℃. The effects of annealing temperature on the structural, morphological, and optical properties of the thin films were investigated. The NaNbO₃:Eu³⁺ sputtering target was synthesized by a solid-state reaction of raw materials Na₂CO₃, Nb₂O₅, and Eu₂O₃. The X-ray diffraction patterns exhibited that the thin films had two mixed phases of NaNbO₃ and Eu₂O₃. Surface morphologies were investigated by using field emission-scanning electron microscopy and indicated that the grains of the thin film annealed at 1000 ℃ showed irregular shapes with an average size of approximately 300 nm. The excitation spectra of Eu³⁺-doped NaNbO₃ thin film consisted of a strong charge transfer band centered at 304 nm in the range of 240-350 nm and two weak peaks at 395 and 462 nm, respectively, resulting from the ⁷F₀→⁵L₆ and ⁷F₀→⁵H₂ transitions of Eu³⁺ ions. The emission spectra under excitation at 304 nm exhibited an intense red band centered at 614 nm and two weak bands at 592 and 681 nm. As the annealing temperature increased from 800 ℃ to 1000 ℃, the intensities of all the emission bands and the band gap energies gradually increased. These results indicate that the higher annealing temperature enhance the luminescent properties of NaNbO₃:Eu³⁺ thin films.

• Journal of Periodontal and Implant Science
• /
• 제52권1호
• /
• pp.54-64
• /
• 2022

Purpose: This in vitro study was conducted to evaluate the effects of different debridement techniques and conditioning procedures on root surface morphology and blood clot stabilization. Methods: Two debridement techniques (curette [CU] vs. high-speed ultrasound [US]) and 2 conditioning procedures (ethylenediaminetetraacetic acid [EDTA] and phosphoric acid [PA]) were used for the study. Seven experimental groups were tested on root surfaces: 1) no treatment (C); 2) CU; 3) US; 4) CU+EDTA; 5) US+EDTA; 6) CU+PA; and 7) US+PA. Three specimens per group were observed under scanning electron microscopy (SEM) for surface characterization. Additional root slices received a blood drop, and clot formation was graded according to the blood element adhesion index by a single operator. Data were statistically analyzed, using a threshold of P<0.05 for statistical significance. Results: The C group displayed the most irregular surface among the tested groups with the complete absence of blood traces. The highest frequency of blood component adhesion was shown in the CU+EDTA group (P<0.05), while no differences were detected between the CU, US+EDTA, and CU+PA groups (P<0.05), which performed better than the US and US+PA groups (P<0.05). Conclusions: In this SEM analysis, EDTA and conventional manual scaling were the most efficient procedures for enhancing smear layer removal, collagen fiber exposure, and clot stabilization on the root surface. This technique is imperative in periodontal healing and regenerative procedures.

• 한국식생활문화학회지
• /
• 제22권1호
• /
• pp.43-57
• /
• 2007

This study was designed to identify the actual state of ready-to-eat street-foods usage in a college-town in northern part of seoul. For the empirical study, data was collected from customers who had eaten street-foods and a survey was conducted from 16 to 30, May 2006. The results showed that many respondents had irregular eating habits. More than 60% of them responded they usually skipped breakfast and the reason was no time. It was shown that they have had Frequent snacks and unbalanced diet. The results of survey are as follows ; 1. The major time for street-foods usage: p.m 3-5 (28.77%). 2. The frequency of street-foods usage: 1-2 times/week (43.85%). 3. The street-foods usage days of the week: weekday (52.79%). 4. The mean cost for the onetime purchase of street-foods usage: 1000-3000won (71.79%). 5. The monthly cost for the purchase of street-foods usage: below 50000won (81.84%). 6. The reason for street-foods usage: mainly convenience (60.61%). 7. The reason for minding street-foods : mainly insanitary (40.50)%. 8. Factors considered when choosing street-foods: tastes of the foods (65.08%). Also, it was shown that over 50% of respondents have considered the street-foods as the worth of meal replacement, and taken effective factor on eating habits for influx of new culture. It was indicated that problems of street-foods usage was the unbalanced nutrition for 81.8% of respondents and suggestions for improving the street-foods were sanitary controls for products for 63.4% of respondents.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2022년도 학술발표회
• /
• pp.208-208
• /
• 2022

Recently, the frequency of abnormal weather due to complex factors such as global warming is increasing frequently. From the past rainfall patterns, it is evident that climate change is causing irregular rainfall patterns. This phenomenon causes difficulty in predicting rainfall and makes it difficult to prevent and cope with natural disasters, casuing human and property damages. Therefore, accurate rainfall estimation and rainfall occurrence time prediction could be one of the ways to prevent and mitigate damage caused by flood and drought disasters. However, rainfall prediction has a lot of uncertainty, so it is necessary to understand and reduce this uncertainty. In addition, when accurate rainfall prediction is applied to the rainfall-runoff model, the accuracy of the runoff prediction can be improved. In this regard, this study aims to increase the reliability of rainfall prediction by analyzing the uncertainty of the Korean rainfall ensemble prediction data and the outflow analysis model using the Limited Area ENsemble (LENS) and the Grid based Rainfall-runoff Model (GRM) models. First, the possibility of improving rainfall prediction ability is reviewed using the QM (Quantile Mapping) technique among the bias correction techniques. Then, the GRM parameter calibration was performed twice, and the likelihood-parameter applicability evaluation and uncertainty analysis were performed using R², NSE, PBIAS, and Log-normal. The rainfall prediction data were applied to the rainfall-runoff model and evaluated before and after calibration. It is expected that more reliable flood prediction will be possible by reducing uncertainty in rainfall ensemble data when applying to the runoff model in selecting behavioral models for user uncertainty analysis. Also, it can be used as a basis of flood prediction research by integrating other parameters such as geological characteristics and rainfall events.