• 한국군사과학기술학회지
• /
• 제18권3호
• /
• pp.293-299
• /
• 2015

We analyzed the damage effect on Glass Fibre Reinforced Plastics(GFRP) under air flow by irradiation of continuous wave near-IR laser. Damage process and temporal temperature distribution were demonstrated and material characteristics were observed with laser intensity, surface flow speed and angle. Surface temperature on GFRP rapidly increased with laser intensity, and the damaged pattern was different with flow characteristics. In case of no flow, penetration on GFRP by burning and flame generation after laser irradiation was appeared at once. GFRP was penetrated by the heat generated from resin ignition. In case of laser irradiation under flow, a flame generated after burning extinguished at once by flow and penetration pattern on GFRP were differently shown with flow angle. From the results, we presented the damage process and its mechanism.

• Journal of Ginseng Research
• /
• 제36권3호
• /
• pp.308-313
• /
• 2012

Fresh (raw roots), white (dried), and red (steamed-drid) ginseng samples were gamma-irradiated at 0 to 7 kGy. Electron spin resonance (ESR) technique was used to characterize the irradiation status of the samples, targeting the radiation-induced cellulose radicals after different sample pretreatments. All non-irradiated samples exhibited a single central signal (g=2.006), whose intensity showed significant increase upon irradiation. The ESR spectra from the radiation-induced cellulose radicals, with two side peaks (g=2.0201 and g=1.9851) equally spaced (${\pm}3mT$) from the central signal, were also observed in the irradiated samples. The core sample analyzed after alcoholic-extraction produced the best results for irradiated fresh ginseng samples. In the case of irradiated white and red ginseng samples, the central (natural) and radiation-induced (two-side peaks corresponding to cellulose radical) signal intensities showed little improvement on alcoholic-extraction. The water-washing step minimized the effect of $Mn^{2+}$, but reduced the intensity of side peaks making them difficult to indentify. The effect of different origins was negligible, however harvesting year showed a clear effect on radiation-induced ESR signals.

• 한국산학기술학회논문지
• /
• 제3권3호
• /
• pp.161-165
• /
• 2002

게르마늄첨가 다성분계 산화물 유리를 제조하여 자외선(UV) 조사에 따른 유리의 미세 구조변화를 PL(photo-luminescence)과 ESR(electron spin resonance)을 이용하여 관찰하였다. 게르마늄 첨가량이 증가함에 따라 PL방사량은 증가하였으며, UV 조사 후에는 처음과 반대되는 광혹화 현상으로 감소하는 현상을 나타냈다. UV조사로 변화된 특성은 열처리를 통하여 회복이 가능하였으며, ESR 측정에서도 PL결과와 같은 광혹화 현상(phodarkenine effect)과 열표백화 현상(thermal bleaching effect)이 확인되었다. 또한, XRD 분석을 통하여 이러한 현상이 비정질 상은 그대로 유지하는 미세구조 변화임을 알 수 있었다.

• Macromolecular Research
• /
• 제12권1호
• /
• pp.53-62
• /
• 2004

We have prepared polymer composites of low-density polyethylene (LDPE) and ionomers (Surlyn 8940) containing polar segments and metal ions by melt blending with carbon black (CB) as a conductive filler. The resistivity and positive temperature coefficient (PTC) of the ionomer/LDPE/CB composites were investigated with respect to the CB content. The ionomer content has an effect on the resistivity and percolation threshold of the polymer composites; the percolation curve exhibits a plateau at low CB content. The PTC intensity of the crosslinked ionomer/LDPE/CB composite decreased slightly at low ionomer content, and increased significantly above a critical concentration of the ionomer. Irradiation-induced crosslinking could increase the PTC intensity and decrease the NTC effect of the polymer composites. The minimum switching current (Ι$\sub$trip/) of the polymer composites decreased with temperature; the ratio of Ι$\sub$trip/ for the ionomer/LDPE/CB composite decreased to a greater extent than that of the LDPE/CB composite. The average temperature coefficient of resistance (${\alpha}$$\sub$T/) for the polymer composites increased in the low-temperature region.

• Macromolecular Research
• /
• 제11권6호
• /
• pp.495-500
• /
• 2003

UV-induced graft polymerization of glycidyl methacrylate (GMA) to a polypropylene (PP) membrane was carried out in the vapor phase with benzophenone (BP) as a photoinitiator. Attenuated total reflection Fourier transform infrared spectroscopy, atomic force microscopy (AFM), and scanning electron microscopy (SEM) were utilized to characterize the copolymer. The degree of grafting increased with increasing reaction time, increased UV irradiation source intensity, and increased immersion concentration of the BP solution. The optimum synthetic condition for the PP-g-GMA membrane was obtained with a reaction time of 2 hrs, a UV irradiation source intensity of 450 W, and an immersion concentration of the BP solution of 0.5 mol/L. The pure water flux decreased upon increasing the degree of grafting and increasing the amount of diethylamino functional group introduced. The analysis of AFM and SEM images shows that the graft chains and diethylamino groups of PP-g-GMA grew on the PP membrane surface, resulting in a change in surface morphology.

• 한국환경과학회지
• /
• 제6권4호
• /
• pp.369-378
• /
• 1997

The effects of various intensity of W-B on barley seeding were investigated by PS I and II activities and chlorophyll fluorescence. The Inhibitory effect of UV-B radiation on electron transport activity was Increased as the intensity of UV-B Irradiation was increased. Especially, PS I is more sensitive to UV-B radiation than PS I is. By the addition of uncle electron donor, DPC, to the chloroplasts of the barley seedlings treated with UV-B, the photoreduction of DCPIP was recovered by only 1 IBI on electron transport activity. However, the activity of PS II was Inhibited by 45% by the treatment with UV-B, but recovered it only 11% by the addition of DPC. These suggest that other sites besides the oxidation site of PS II may be affected more by UV-B Irradiation. As the intensify of UV-B was Increased, Fo was Increased while Fv was decreased, and thus Fv/Fm was decreased. This means that photochemical efficiency was reduced. With this parameters, it might be that UV-B radiation affected adversely to around PS II.

• 한국식품영양과학회지
• /
• 제30권2호
• /
• pp.239-242
• /
• 2001

Electron spin resonance(ESR) spectroscopy was used to investigate the effect of irradiation dose on the ESR signal intensity of irradiated spices and to identify the stability of radicals after storage. Red, white and black peppers, and garlic powders were irradiated with doses of 0, 1, 5, 10, 20 and 30 kGy at room temperature using a Co-60 irradiator. Triplet ESR signals were observed in irradiated pepper powders, while singlet ESR signals were observed in irradiated garlic powders. Those characteristic signals were not detected in non-irradiated samples. The strength of ESR signals linearly increased with the applied doses(1~3 kGy). Highly positive correlation coefficients ($R^2$=0.9757~0.9933) were obtained between the irradiation doses and the corresponding ESR signal intensities. The signal intensities of irradiated samples were stable even after 97 days of storage at room temperature.

• 대한방사선기술학회지:방사선기술과학
• /
• 제23권2호
• /
• pp.39-42
• /
• 2000

When ordinary sugar is exposed to ionizing radiation, a number of free radical are created in sugar, and Electron Paramagnetic Resonance (EPR) signal appears from the sugar because of the paramagnetic property of free radical. In this paper, EPR signal intensity has been measured in x-ray irradiated sugar for various absorbed doses, irradiated dose up to 50 Gy. The EPR intensity signals are increased as the x-ray irradiation increases. Also, the fading value decreased to about 3% in 30day after the irradiation. Therefore, the sugar is a useful material for emergency dosimeter as the free radical dosimetry with the EPR equipment.

• Transactions on Electrical and Electronic Materials
• /
• 제9권3호
• /
• pp.116-119
• /
• 2008

The purpose of this study is to develop the Photodynamic Therapy Equipment for medical treatment. We developed the equipment which was helpful in palpating wound healing by using 525 nm LEDs. The equipment was assembled with a micro-controller and green color LEDs, and designed to enable us to control light irradiation time, intensity and so on. In this study, the designed device was used to find out how 525 nm LEDs light affected the skin wound of SD-Rat(Sprague-Dawley Rat). We divided the participants into two groups; irradiation group which was irradiated one hour a day for 9 consecutive days, and none irradiation group. The results showed that the study group had lower incidence of inflammation and faster recovery, compared with the control group.

• 상하수도학회지
• /
• 제31권5호
• /
• pp.441-445
• /
• 2017

This study aimed to investigate growth rate and nutrient consumption of Chlorella vulgaris according to different light irradiation interval. Applied light irradiation intervals were 12 hr, 4 hr, 1 hr, and 1 min. The light source was flexible LED(Blue:Red=1:1), light intensity was 200 PPFD and Light/Dark cycle was 1:1. As a result, growth rate and nutrient removal efficiencies showed no significant differences depending on the light irradiation interval. Considering the reproduction characteristics of applied microalgae cultures of this study, this is thought to be one of the possible reasons of above results. Because Chlorella vulgaris performs an asexual reproduction and it is known that there is no significant relationship between light irradiation interval and growth rate, including nutrient consumption in case of asexual reproduction.