• Journal of Sericultural and Entomological Science
• /
• v.6
• /
• pp.34-38
• /
• 1966

This experiment was to find out the exact amount of iron component in filature water affecting or the coloring and iron component content in the raw silk after the quantitative analysis of iron component in the filature water, cocoon bave and raw silk. 1. In Korea the extent of iron component in filature water is 0.01-0.77 PPM, and the average amount is 0.23 PPM. 2. The sample water from wells contains more than twice as much iron component as the river water. 3. The iron component content in the cocoon bave (Fe$_2$O$_3$ 0.0096%) and that in the raw silk (Fe$_2$O$_3$ 0.0084%) are similar. But it should be noticed that while the ash content in cocoon bave is twice as much as raw silk, the same amount of ash in raw silk has twice as much iron component as the cocoon bave. 4. The amount of iron component in filature water has great effect on the resolution and absorption of iron component contained in the raw silk during cooking and reeling. That is, when the amount of iron component is small, the rate of iron component resolution from the cocoon bave increases and finally the raw silk comes to contain much less iron component than the cocoon bave, but when the iron component amount is over 0.40 PPM, the raw silk happens to contain more iron component than the cocoon bave. 5. The iron component in filature water makes the raw silk grayish and the more the iron component, the grayer the raw silk. 6. While even very small amount of iron component can affect the depth of raw silk, relatively large amount of Mn component does not have so much influence on the coloring.

• Journal of environmental and Sanitary engineering
• /
• v.15 no.2
• /
• pp.18-26
• /
• 2000

In order to improve the quality of Kamju(sikhae), Korean traditional sweat fermentated rice drink, Kamju made with laboratory fermenting from both covered barley malt and that added to commercial $\alpha-amylase$ and commercial sikhae can were investigated and analyzed ad follows 1. The amylase activities in L-malt(laboraory made malt), C-malt(commercial malt) were 25,065 units, 20,498 units at $60^{\circ}C$ and when heating at $60^{\circ}C$ for one hour their heat stability was getting lower and while at $70^{\circ}C$ after 2 hours both their heat stability was under 21%. 2. The external appearance, of all samples, in beating test, flipper, springer and leaker test were excellent and good valued. On the open test of sample can, head space was 7.9~9.0mm, net weight 247~250g, 432~435g, pH 4.96-5.76, Brix 13.2~14.0 and vacuum degree was 29~35cmHg. 3. The sucrose content of sample 1~5 was 8,57~10.01% highest ammount than sample 6(0.91%) 7(0.43%) and maltose content of sample 1~5 was 0.65~1.41% lower than 6 was 7.91% and 7 was 8,36%. The good traditional flavor texture and saccharides components content of glucose of sample 1~5 was 1.09~1.51, 6(3.86%), 7(3.97%), fructose content of sample 1~5 was 0.45~0.95%, 6(2.76%), 7(2.81%), maltotriose and raffinose of sample 1~5 were 0.04~0.291, 6(0.61%), 7(2.81%), and solid content of sample 1~5(3.1~3.8) was lower than 6(10.25%), 7(10.09%). 4. The result of sensory test as measured as lemone yellow of sample 6 and milky of sample 7, and weetness, flavor, color, traditional texture and sensory value for sample 1~5(3.1~3.8) was lower degree than that for 6(4.5), 7(4.0). 5. Among the heavy metals analyzed from sample cans, tin, iron and lead content for sample 1~5 were 31.95~36.71ppm, 5.84~6.39ppm and 0.075~0.09ppm while their content of sample 6.7, tin, 32.91ppm, 32.87ppm, iron 5.51ppm, 5.41ppm and lead, 0.074ppm, 0.079ppm.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.9 no.1
• /
• pp.113-122
• /
• 2002

Purpose: The purpose of this study was to identify characteristics of serum ferrum, TIBC and ferritin's circadian rhythm in normal adults and to prepare a standard to determine the examination material extraction time. Method: Nine women and ten men made up the convenience sample for this study they were from the staff of D university hospital and students in D medical School located in K city who met the qualifications for inclusion in the sample. The value of serum ferrum, TIBC and circadian rhythm were calculated as follows : First. each variable's amplitude. the acrophase and average were measured for a 24 hour cycle using the cosinor method, and then each person's rhythm was analyzed. Results: There were significant serum iron circadian rhythm for both men and women (p<.05). For the men, mesor was $105.91{\mu}g/dl$. amplitude was $29.52{\mu}g/dl$, and the acrophase was 9.76 hour. For the women, mesor was $108.17{\mu}g/dl$, amplitude was $28.09{\mu}g/dl$, and the acrophase was 11.42 hour The rhythm change of TIBC was only significant for the women (p<.05), mesor was 383.39mg/dl, amplitude was 60.29mg/dl. and the acrophase was 14.93hour. As for the circadian rhythm of the ferritin, there are no diurnal variation in either sex, men were between 134.0ng/ml and 137.4ng/ml, and women, between 29.1ng/ml and 30.1ng/ml. Conclusion: To help diagnose the boundary line between normal or deficiency in iron, measurement should be carried out at a fixed time in the morning and evening, or a more proper time would be in the afternoon at the time when the width of amplitude is the least.

• Applied Chemistry for Engineering
• /
• v.32 no.5
• /
• pp.556-561
• /
• 2021

Recently, iron oxide nanoparticles have been used as the subject of many studies on drug delivery system (DDS) due to their excellent magnetic properties and biocompatibility in response to external magnetic fields. In this study, hyaluronic acid-superparamagnetic microneedles (HA-SMNs) and carboxy methyl cellulose-superparamagnetic microneedles (CMC-SMNs) containing superparamagnetic iron oxide nanoparticles (SIONs) were prepared with HA and CMC as a matrix materials of MNs (microneedles). Various properties of SMNs were then investigated with scanning electron microscopy (SEM), superconducting quantum interference device-vibrating sample magnetometer (SQUD-VSM), frequency mixing magnetic detection (FMMD), and polymer/bio membrane. The SQUID-VSM measurements showed superparamagnetism of HA-SMNs and CMC-SMNs containing SIONs. The FMMD results demonstrated that the signal intensity changed significantly as the concentration of SIONs increased. In addition, SMNs exhibited the average skin permeability intensities on the bio membrane for HA-SMNs and CMC-SMNs were 92.5 and 98.5%, respectively. These results suggested that SMNs could be utilized as deliver materials for a TDDS and MR molecular imaging.

• Journal of Korean Society for Atmospheric Environment
• /
• v.7 no.2
• /
• pp.137-142
• /
• 1991

A method is developed for the simultaneous determination of dissolved iron, copper, and zinc in rainwater. The method involves 25-fold evaporative concentration, ion chromatographic separation and subsequent spectrophotometric detection after post-column reaction with 4-(2-pyridylazo) resorcinol. Analytical sensitivities, being defined by the slopes of calibration curves, are 0.93, 0.54, and 0.11 Abs/ $\mu$g/ml for iron, copper, zinc, respectively. Detection limits render around a few tenth of one ng/ml. Precisions evaluated by replicate analysis of real sample are better than 10% RSD. Due to the lack of certified standards for rainwater, the accuracy of the method could not be assessed directly. However, the results of this method agree well with those by inductively coupled plasma mass spectrometry. Analytical results for a suite of Seoul rainwaters are presented herein.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.424-425
• /
• 2006

The effects of reaction temperature and precursor concentration on the microstructure and magnetic properties of ${\gamma}-Fe_2O_3$ nanoparticles synthesized as final products of iron acetylacetonate in chemical vapor condensation (CVC) were investigated. Pure ${\gamma}-Fe_2O_3$ phase was obtained at temperature above $900^{\circ}C$ and crystallite size of ${\gamma}-Fe_2O_3$ nanoparticles decreased with lowering precursor concentration. Also, the coercivity decreases with decreasing crystallite size of nanopowder. The lowest coercivity was 7.8 Oe, which was obtained from the ${\gamma}-Fe_2O_3$ nanopowder sample synthesized at precursor concentration of 0.3M. Then, the crystallite size of ${\gamma}-Fe_2O_3$ nanoparticles was 8.8 nm.

• Journal of the Korean Chemical Society
• /
• v.11 no.4
• /
• pp.132-137
• /
• 1967

A spectrophotometric method for the determination of major impurities, such as iron and copper, in high purity of antimony with 8-hydroxyquinoline (oxine) has been studied. The iron-oxinate is stable at the pH range 5.0 to 5.7, and the copper-oxinate at the pH range 3.5 to 4.0. To mask antimony in sulfuric acid solution of sample, author has investigated the effect of tartaric acid on antimony, and found that 10ml of 0.5M tartaric acid solution could mask up to 600mg of antimony. The absorbance of iron-oxinate was measured at 580$m{\mu}$ and iron could be determined, but it is necessary for copper-oxinate to measure at 410 and 580m respectively after removing heavy metals other than copper by back extraction with 15% solution of sodium hydroxide, and copper could be determined by making a correction for the amounts of iron present. Up to 150 ${\mu}g$ of iron (0.005-0.03%), and 100 ${\mu}g$ of copper (0.005-0.016%), in 500mg of antimony could be determined.

• 보존과학연구
• /
• s.24
• /
• pp.187-213
• /
• 2003

Sungseonsa Temple site in Chungju city in Chungcheongbuk-doProvince is written in "Goryeosa" as a building for Queen Sinmyeongsunseong, the mother of Gwangjong in AD 954 in Goryeo Dynasty. The museum in Chungcheong University takes charge of the excavation for 3 times from 2000 to 2002 and identified that its construction was carried out till Joseon Dynasty. Among the iron artifacts from the first excavation such as a weeding hoe, a hand knife, a lock, two nails and a plow which had conservation treatments, the sample was collected. Its micro-structure and method of manufacture were investigated. Excavation report for those artifacts has not published yet, therefore, the date of each artifacts is not clearly confirmed. The samples were collected from each part of the objects and then embedded in epoxy resin and etched with nitric acid. The examination of its microstructure is carried out under the microscope and the hardness values were measured by Vickers hardness tester. From the results, some artifacts show different manufacture method sin the each parts. The forming processes of the iron weeding hoe and the iron sickle are similar but the blade of iron weeding hoe was strengthened by carbonization whereas the blade of the iron sickle was done by quenching. The hand knife and the nails were produced through almost same methods and shows similar microstructures. The hand knife seems to be made by repeated beating and folding in low temperature resulting in fine crystallization, but the nail shows large crystallization due to processes in high temperature. Lock is made of white cast iron, that does not show any heat treatment.

• Journal of the Korean Chemical Society
• /
• v.21 no.2
• /
• pp.121-124
• /
• 1977

A study on the formation of black iron oxide was carried in differents of Fe(III), Fe(II) ion in the aqueous solution that iron(II) sulfate was calcined under various temperature and leached in water. The results obtained was follows; (1) It was found that the sample calcined in an electric muffle furnace maintained at $500^{\circ}C$ for 1 hour and leached in water was equivalent mole (Fe(III) /Fe(II) = 1) in 20% aqueous solution. (2) When the above mentioned solution was hydrolyzed at pH range of 7 to 8 for 2 hours at $100^{\circ}C$, 93% and over of iron was recovered in the form of ${\alpha}-Fe_3O_4$ with a black colour.

• Advances in environmental research
• /
• v.3 no.4
• /
• pp.283-292
• /
• 2014

Iron precipitating organisms play a significant role in the formation of ferric hydroxide precipitate, which acts as strong adsorbent for toxic metal. In this respect four different iron precipitating cultures were isolated from Hutti gold mine surface winze water sample on citrate agar medium. The best isolate was screened out for metal removal study on the basis of fast visual iron precipitation. The selected isolate was identified as Enterobacter sp. based on routine biochemical tests and Biolog GN microplate results and as Enterobacter cloacae subsp. dissolvens by 16S rRNA gene sequence analysis (GenBank accession number EU429448). Influence of medium composition, medium initial pH, the influence of inoculum size, effect of various media and ferric ammonium citrate concentration were studied on metal removal in shake flask experiments. Under the optimized conditions studied, E. cloacae showed $94{\pm}2$, $95{\pm}2$ and $70{\pm}2%$ of cadmium, copper and mercury removal from a simulated waste in shake flask studies. In lab scale column reactor more than 85% of copper and mercury removal was achieved.