• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.742-747
• /
• 1998

In the High-Speed range for salient type synchronous reluctance motors, the effect of iron loss can not be negligible. In this paper, the SynRM without cage is analyzed mathematically to model and the speed control system is examined by simulation. In order to control the revolution speed, a closed-loop control with vector control and decoupling control are applied to the high-speed SynRM drives. The speed control system is analyzed to investigate the desired speed characteristics of high SynRM by simulation.

• Journal of Magnetics
• /
• 제16권4호
• /
• pp.423-426
• /
• 2011

This paper presents numerical analysis and design of high power contactless transformer with a large air-gap for moving on a guided linear track which is appropriate for high-speed train or MAGLEV. The system has the typical characteristics of large leakage inductance, small magnetizing inductance, and low coupling coefficients giving rise to lower power transfer efficiency, which have been compensated by the purposely-designed contactless transformer coupled with the resonant converter modulating with high switching frequency. In particular, the best model selected from the generated six design candidates has been applied for 3D Finite Element Analysis (FEA) investigating on iron loss to evaluate the overall system efficiency.

• Asian-Australasian Journal of Animal Sciences
• /
• 제27권6호
• /
• pp.880-885
• /
• 2014

Experiments were conducted to evaluate the effect of an outdoor-grazed raising model on meat composition, physical properties and sensory attributes of Taiwan game hens. Six hundred 1-d old female chicks were raised on a floor for 8 weeks. On day 57, 600 healthy birds, with similar body weight, were selected and randomly assigned to three treatment groups (cage, floor-pen and free-range). The results showed that different feeding models had no effect on drip loss, cooking loss, moisture, crude protein, crude fat, crude ash, zinc and calorie contents in breast meat and moisture content in thigh meat. The free-range group had the lowest fat content in both breast and thigh meat, and the lowest calorie content in thigh meat. The firmness and toughness in both thigh and breast of the free-range group were the highest values (p<0.05). The crude protein, total collagen, zinc and iron contents in thigh meat and total collagen content in breast meat of the free-range group were significantly higher than those of the cage-feeding group (p<0.05). The meat sensory scores of flavor, chewiness and overall acceptability of both thigh and breast meat of the free-range group were significantly (p<0.05) better than those of the other two groups. Moreover, the current findings also indicate that the Taiwan game hens of the free-range feeding model displayed well-received carcass traits and meat quality, with higher scores for flavor, chewiness and overall acceptability for greater sensory satisfaction in both breast and thigh meat. In addition, the thigh meat contained high protein and total collage but low fat, offering a healthier diet choice.

• 한국자기학회지
• /
• 제17권6호
• /
• pp.242-245
• /
• 2007

전자기적 해석 시뮬레이션 프로그램인 유한요소 방식의 HFSS(High Frequency Structure Simulation)를 사용하여, 전도 노이즈 흡수 sheet의 흡수특성을 해석하고 그 결과 값을 실측값과 비교함으로써 해석방법의 타당성을 검토하였다. 마이크로스트립 선로는 $S_{11}\simeq-30dB,\;S_{21}=0dB$의 반사투과 특성을 보여 전도 노이즈 흡수율 측정에 이상적인 전송특성을 보였다. 순철 압분체-고무 복합체 sheet의 복소비투자율과 복소비유전율을 입력하여 노이즈 흡수율을 계산한 결과 실측치와 비교적 잘 일치하는 해석결과를 얻었다. 주파수, 흡수계의 크기(특히 선로를 덮는 길이)에 따라 노이즈 흡수율은 현저한 변화를 보였으며, 이는 재료의 손실 특성과 밀접히 연관되어 있음을 제시하였다. 이러한 해석방법은 다양한 조성 및 크기의 전도 노이즈 흡수체의 설계에 유용히 사용될 수 있음을 제안할 수 있다.

• Investigative Magnetic Resonance Imaging
• /
• 제17권3호
• /
• pp.181-191
• /
• 2013

목적: 급성 신부전 쥐 모델에서 상자성 철 산화물 (superparamagnetic iron oxide(SPIO)로 표지한 인간탯줄혈관내피 세포를 자기공명영상으로 추적할 수 있는지 그 유용성을 평가하고자 하였다. 대상과 방법: 인간탯줄혈관내피 세포를 SPIO와 poly-L-lysine (PLL) 혼합물로 표지 하였다. SPIO 농도에 따라서 이완율, 세포 생존율, 표지 안정성을 SPIO 농도의 변화에 따라 평가하였다. 인간탯줄혈관내피 세포를 급성 신부전 쥐 모델에서 꼬리정맥을 통하여 주사하였다. MR을 이용한 추적 검사는 $T2^*$ 경사에코 MR 영상을 이용하였다. 1, 3, 5, 7일째 추적한 MR 영상 소견을 조직 소견과 서로 견주어 보았다. 결과: SPIO-PLL 혼합물을 표지 한 후 Prussian blue 염색에서 평균 $98.4{\pm}2.4%$ 세포가 양성반응을 보였다. 3일과 5일 후 측정한 이완율은 1일에 비해 큰 차이가 없었다. 인간탯줄혈관내피 세포를 SPIO로 표지 한 후 안정성이 유지됨을 알 수 있었다. 추적 MR 영상에서 급성신부전을 유도한 왼쪽 신장 외곽 신 수질에서 신호강도 소실을 보였으나 오른쪽은 정상이었다. 3, 5, 7일 후 촬영한 영상에서 왼쪽 신 수질에서 보인 신호강도 소실이 점차 사라졌으나 오른쪽 신장에서는 여전히 특별한 변화를 보이지 않았다. 조직학 검사에서도 MR 영상의 신호강도 소실이 Prussian blue 염색을 보인 부분과 일치하였다. 면역화학적 분석에서 신 수질에서 보인 세포들이 인간탯줄혈관내피 세포임을 확인하였다. 결론: MR 영상은 급성 신부전 치료의 한 방법인 세포 치료의 경우 세포 추적 검사에 유용하게 사용될 수 있음을 확인하였다.

• 한국지반환경공학회 논문집
• /
• 제9권3호
• /
• pp.17-28
• /
• 2008

본 연구에서는 상수도 금속관의 공식특성에 따른 잔존 인장강도 예측모델을 제안하였다. 이들 모델중 회주철관에 대해서는 지수함수형 모델이 실측값에 대한 예측값의 상관성($R^2$)이 높게 나타났으며, 닥타일주철관과 강관 등은 선형함수인 공식특성에 따른 강도손실 모델이 더 예측력이 높은 것으로 나타났다. 국내에서 과거에 제조된 상수도 금속관의 파괴인성은 평균적으로 회주철관이 $40.46kgf/mm^2{\sqrt{mm}}$, 닥타일주철관이 $85.27kgf/mm^2{\sqrt{mm}}$, 그리고 강관이 $97.27kgf/mm^2{\sqrt{mm}}$로 나타났으며, 파괴인성을 이용한 잔존 인장강도 예측모델의 실측값에 대한 예측값의 상관성은 관종에 따라 다르나 0.44에서 0.86로 나타났다. 특히 이들 제안된 모델들을 새로운 지역에 매설된 상수관로에 대하여 적용한 결과, 결정계수가 0.76~0.78로 나타나 향후 노후 상수도 금속관의 잔존 강도를 예측하는데 활용됨으로서 합리적인 개대체 의사결정에도 도움을 줄 수 있을 것으로 판단된다.

• Journal of Magnetics
• /
• 제14권4호
• /
• pp.161-164
• /
• 2009

Iron-doped $Sn_{1-x}Fe_xO_2$ (x = 0.0, 0.05, 0.1, 0.2, 0.33) thin films on Si(100) substrates and powders were prepared by a chemical solution process. The x-ray diffraction (XRD) patterns of the $Sn_{1-x}Fe_xO_2$ thin films and powders showed a polycrystalline rutile tetragonal structure. Thermo gravimetric (TG) - differential thermal analysis (DTA) showed the final weight loss above $430{^{\circ}C}$ for all powder samples. According to XRD Rietveld refinement of the powders, the lattice parameters and unit cell volume decreased with increasing Fe content. The magnetic properties were characterized using a vibrating sample magnetometer (VSM) and M$\ddot{o}$ssbauer spectroscopy. The thin film samples with x = 0.1 and 0.2 showed paramagnetic properties but thin films with x = 0.33 exhibited ferromagnetic properties at room temperature. Mossbauer studies revealed the $Fe^{3+}$ valence state in the samples. The ferromagnetism in the samples can be interpreted in terms of the direct ferromagnetic coupling of ferric ions via an electron trapped in a bridging oxygen deficiency, which can be explained using the F-center exchange model.

• 한국군사과학기술학회지
• /
• 제17권5호
• /
• pp.604-610
• /
• 2014

In this paper, the analysis and the experiment of independent multi-phase BLDC motor are performed. The back-emf, iron loss analysis are performed by the finite element method and compared with experimental results. The independent multi-phase BLDC motor is manufactured and to measure the efficiency of the motor, evaluation system is also manufactured including the load generator. By comparing the analytic and the experimental results, the effectiveness of the analysis model is verified when calculating the efficiency of the motor.

• 한국해양공학회지
• /
• 제2권2호
• /
• pp.87-95
• /
• 1988

This paper is studied to know corrowive wear characteristics of austempered ductile cast ironin corrosive environments against mating SM45C hardened two test pieces in distilled water and NaCl aqueous solution. The corrosive wear mechanism was investigated by scanning electron microscopy and retained austenite volume fraction was investigated by X-ray diffractometer. The experimental result show that the corrosive wear characteristics depend largely on the $\textrm{Fe(OH)}_{3}$which is influenced by the critical sliding distance $L_{cr}$ and $L_{cr}$ shorted with increasing NaCl concentration. It was found that the carbides in matrix have a significant effect on their corrosive wear resisance and the fine acicular bainite showed corrosive wear resistance stronger than that of the coarse acicular and platelet bainite. From above results the model of corrosive wear mechanism in corrosive environments is proposed.

• Structural Engineering and Mechanics
• /
• 제16권6호
• /
• pp.749-769
• /
• 2003

The structural deterioration of concrete structures due to reinforcement corrosion is a major worldwide problem. Service life of the age-degraded concrete structures is governed by the protective action provided by the cover concrete against the susceptibility of the reinforcement to the corrosive environment. The corrosion of steel would result in the various corrosion products, which depending on the level of the oxidation may have much greater volume than the original iron that gets consumed by the process of corrosion. This volume expansion would be responsible for exerting the expansive radial pressure at the steel-concrete interface resulting in the development of hoop tensile stresses in the surrounding cover concrete. Once the maximum hoop tensile stress exceeds the tensile strength of the concrete, cracking of cover concrete would take place. The cracking begins at the steel-concrete interface and propagates outwards and eventually resulting in the through cracking of the cover concrete. The cover cracking would indicate the loss of the service life for the corrosion-affected structures. In the present paper, analytical models have been developed considering the residual strength of the cracked concrete and the stiffness provided by the combination of the reinforcement and expansive corrosion products. The problem is modeled as a boundary value problem and the governing equations are expressed in terms of the radial displacement. The analytical solutions are presented considering a simple 2-zone model for the cover concrete viz. cracked or uncracked. A sensitivity analysis has also been carried out to show the influence of the various parameters of the proposed models. The time to cover cracking is found to be function of initial material properties of the cover concrete and reinforcement plus corrosion products combine, type of rust products, rate of corrosion and the residual strength of the cover concrete. The calculated cracking times are correlated against the published experimental and analytical reference data.