• Geomechanics and Engineering
• /
• 제11권3호
• /
• pp.421-438
• /
• 2016

Explosions inside transportation tunnels might result in failure of tunnel structures. This study investigated the failure mechanisms of circular cast-iron tunnels in saturated soil subjected to medium internal blast loading. This issue is crucial to tunnel safety as many transportation tunnels run through saturated soils. At the same time blast loading on saturated soils may induce residual excess pore pressure, which may result in soil liquefaction. A series of numerical simulations were carried out using Finite Element program LS-DYNA. The effect of soil liquefaction was simulated by the Federal Highway soil model. It was found that the failure modes of tunnel lining were differed with different levels of blast loading. The damage and failure of the tunnel lining was progressive in nature and they occurred mainly during lining vibration when the main event of blast loading was over. Soil liquefaction may lead to more severe failure of tunnel lining. Soil deformation and soil liquefaction were determined by the coupling effects of lining damage, lining vibration, and blast loading. The damage of tunnel lining was a result of internal blast loading as well as dynamic interaction between tunnel lining and saturated soil, and stress concentration induced by a ventilation shaft connected to the tunnel might result in more severe lining damage.

• 대한화학회지
• /
• 제54권1호
• /
• pp.131-136
• /
• 2010

다양한 철 원소의 조성을 갖는 인산알루미늄 철을 합성하여 표면 성질과 벌크 성질을 조사하였다. 벤질 알코올과 디에틸 말론산의 transesterification반응에 의해 촉매 특성을 결정 하였다. 에틸 벤질 말론산과 디벤질 말론산을 유일한 생성물로 얻었다. 철 성분이 0.025 몰 퍼센트인 FeAlP의 경우에 특이한 촉매 특성과 조직상의 특성이 나타난다. 디에스터의 형성은 중간 정도 크기의 산성 자리에서 이루어진다. 물질 안에 수화된 알루미나와 polycondensed인산이 존재할 경우에는 에스터교환 반응에서 인산 알루미늄 철의 촉매 특성이 감소하게 된다.

• 동의생리병리학회지
• /
• 제20권3호
• /
• pp.638-641
• /
• 2006

Iron is the required microelement supporting life and is the main component of hemoglobin. Thus iron has affinity with exercise capacity. Iron metabolism turbulence induced by exercise is one of causes of hematopoietic hypofunction. Results of the experiment showed that long-term treadmill exercise of progressive loading significantly decreased levels of erythrocyte indexes, serum iron, serum ferritin and significantly increased serum transferrin level. Nutrition supplement could significantly retard the variations, and Exercise +Nutrition group have higher levels of erythrocyte indexes, serum iron, serum ferritin and lower level of serum transferrin than Exercise group. The results indicated that nutrition supplement have function of prevent and cure on iron metabolism turbulence induced by exercise, furthermore significantly enhance hemoglobin level in rats.

• 한국산업융합학회 논문집
• /
• 제27권4_2호
• /
• pp.973-980
• /
• 2024

Dependence of dynamic fracture path on loading velocity was observed from experimental results based on the three point bending fracture in cast iron. In this study, 3D and 2D numerical simulations are used to evaluate singular stress fields near crack tip and fracture mechanics parameters. Moving finite element technique, 2D and 3D Delauney automatic mesh generation and contact-noncontact evaluation is introduced into the numerical method. Dynamic fracture thoughness is decreased with increase of impact loading velocity. Fracture mode-ratio corresponds to initial kink angle of fracture path. The numerical result shows that the maximum hoop stress criterion cannot be applied to dynamic fracture of cast iron.

• Environmental Engineering Research
• /
• 제18권3호
• /
• pp.145-150
• /
• 2013

Optimal preparation guidelines of a cathode catalyst layer by non-precious metal catalysts were evaluated based on electrochemical performance in single-chamber microbial fuel cells (MFCs). Experiments for catalyst loading rate revealed that iron(II) phthalocyanine (FePc) can be a promising alternative, comparable to platinum (Pt) and cobalt tetramethoxyphenylporphyrin (CoTMPP), including effects of substrate concentration. Results showed that using an optimal FePc loading of $1mg/cm^2$ was equivalent to a Pt loading of $0.35mg/cm^2$ on the basis of maximum power density. Given higher loading rates or substrate concentrations, FePc proved to be a better alternative for Pt than CoTMPP. Under the optimal loading rate, it was further revealed that 40 wt% of FePc to carbon support allowed for the best power generation. These results suggest that proper control of the non-precious metal catalyst layer and substrate concentration are highly interrelated, and reveal how those combinations promote the economic power generation of single-chamber MFCs.

• Biomolecules & Therapeutics
• /
• 제17권1호
• /
• pp.98-103
• /
• 2009

Superparamagnetic iron oxide nanoparticles (SPIOs)-embedded chitosan microspheres were developed for magnetic resonance (MR)-traceable embolotherapy. SPIOs-loaded chitosan microspheres were prepared by emulsion and cross-linking technique and 100-200 ${\mu}m$ sized spherical microsparticles were obtained. Loading efficacy and loading amount of SPIOs in microspheres were about 40% and 0.26-0.32%, respectively, when measured by inductively coupled plasma atomic emission spectroscopy. Within 30 days, about 60% of the incorporated SPIOs were released from low cross-linked microspheres, whereas only about 40% of SPIOs was released from highly cross-linked microspheres. Highly cross-linked microspheres were more efficient for lower degree of swelling leading to secure entrapment of SPIOs in matrix. Prepared novel embolic microspheres are expected to be practically applicable for traceable embolotherapy with high resolution and sensitivity through magnetic resonance imaging (MRI).

• 한국지진공학회논문집
• /
• 제28권1호
• /
• pp.41-46
• /
• 2024

The current study investigates the seismic performance of shear-dominant RC columns retrofitted with iron-based shape memory alloy (Fe SMA). Three RC columns with insufficient transverse reinforcement were designed and fabricated for lateral cyclic loading tests. Before testing, two specimens were externally confined with carbon fiber-reinforced polymer (CFRP) sheets and self-prestressed Fe SMA strips. The test results showed that both CFRP and Fe SMA performed well in preventing severe shear failure exhibited by the unretrofitted control specimen. Furthermore, the two retrofitted specimens showed ductile flexural responses up to the drift ratios of ±8%. In terms of damage control, however, the Fe SMA confinement was superior to CFRP confinement in that the spalling of concrete was much less and that the rupture of confinement did not occur.

• 산업기술연구
• /
• 제22권A호
• /
• pp.3-8
• /
• 2002

In this study, extremely low cycle fatigue tests were carried out under push-pull loading conditions using graphite cast iron (GCD). In order to clarify the fatigue fracture mechanism of GCD in an extremely low cycle fatigue regime successive observations of internal fatigue damage were performed. The results obtained are as follows. (1) The process of extremely low cycle fatigue can be classified into three stages which are composed of the generation, growth and coalescence of microvoids inside materials. (2) In an extremely low cycle fatigue regime, microvoids originate from debonding of graphite-matrix interface.

• 한국수소및신에너지학회논문집
• /
• 제35권2호
• /
• pp.185-194
• /
• 2024

Fe-Ni nanocatalysts loaded on carbon black were prepared via spontaneous reduction reaction of iron (II) acetylacetonate and nickel (II) acetylacetonate in dry process. Their morphology and elemental analysis were characterized by scanning electron microscopy, transmission electron microscopy (TEM), and energy dispersive X-ray analyzer. The loading weight of the nanocatalysts was measured by thermogravimetric analyze and the surface area was measured by BET analysis. TEM observation showed that Fe and Ni nanoparticles was well dispersed on the carbon black and their average particle size was 4.82 nm. The loading weight of Fe-Ni nanocatalysts on the carbon black was 6.83-7.32 wt%, and the value increased with increasing iron (II) acetylacetonate content. As the Fe-Ni loading weight increased, the specific surface area decreased significantly by more than 50%, because Fe-Ni nanoparticles block the micropores of carbon black. I-V characteristics showed that water electrolysis performance increased with increasing Ni nanocatalyst content.

• Journal of Microbiology and Biotechnology
• /
• 제18권10호
• /
• pp.1672-1677
• /
• 2008

IscR (iron-sulfur cluster regulator) has been reported to be a repressor of the iscRSUA operon, and in vitro transcription reactions have revealed that IscR has a repressive effect on the iscR promoter in the case of [$Fe_{2}S_{2}$] cluster loading. In the present study, the iscR gene from A. ferrooxidans ATCC 23270 was cloned and successfully expressed in Escherichia coli, and then purified by one-step affinity chromatography to homogeneity. The molecular mass of the IscR was 18 kDa by SDS-PAGE. The optical and EPR spectra results for the recombinant IscR confirmed that an iron-sulfur cluster was correctly inserted into the active site of the protein. However, no [$Fe_{2}S_{2}$] cluster was assembled in apoIscR with ferrous iron and sulfide in vitro. Therefore, the [$Fe_{2}S_{2}$] cluster assembly in IscR in vivo would appear to require scaffold proteins and follow the Isc "AUS" pathway.