• 한국대기환경학회지
• /
• 제12권1호
• /
• pp.79-90
• /
• 1996

Total suspended particles were measured at Kosan, Cheju Island, Korea during the period of March 11 .sim. April 19, 1994. Concentrations of non-sea salt(nss) ions were higher than those measured at clean marine areas in Japan and other background marine areas in the world. Especially, nss sulfate concentration is compatable to thoes measured at Seoul. It is suggested that most nss sulfate concentration is originated from anthropogenic sources. Nss sulfate concentration shows strong correlation with ammonium and nss potassium concentrations while shows no a pparent correlation with nitrate and nss calcium concentrations. Nss calcium concentrations shows strong correlation with nss potassium and mss magnesium concentrations. It is deduced that nss potassium has two origins, one anthropogenic, the other crustal. Backward trajectory analysis results show the trajectories of air parcel during the measurement period were mostly originated from China. It is shown that cases of high nss sulfate with high nss calcium can occur when an air parcel originated from arid and semi-arid regions of morthwestern China or Mongolia passes through northeastern China.

• 한국표면공학회지
• /
• 제47권4호
• /
• pp.147-154
• /
• 2014

Formation behavior of PEO (Plasma Electrolytic Oxidation) films on AZ31 Mg alloy was studied in aqueous solutions containing various concentrations of hydroxide ion ($OH^-$) and silicate ion ($SiO_3{^{2-}}$) by voltage-time curves, and corrosion resistance of the PEO film-covered specimen was investigated by immersion test in 0.5 M NaCl solution. From the analyses of the voltage-time curves, it is suggested that two different types of anions are essentially needed for the formation of PEO films on AZ31 Mg alloy: film formation agent and local film breakdown agent. $SiO_3{^{2-}}$ ion acts only as a film formation agent but $OH^-$ ion acts not only as a film formation agent but also film breakdown agent. The PEO films prepared on AZ31 Mg alloy in alkaline silicate solution showed very good corrosion resistance without any pitting or filiform corrosions up to 480 h of immersion in 0.5 M NaCl.

• Journal of Microbiology and Biotechnology
• /
• 제25권1호
• /
• pp.66-73
• /
• 2015

The pabS gene of Agaricus bisporus 02 encoding a putative PABA synthase was cloned, and then the recombinant protein was expressed in Escherichia coli BL21 under the control of the T7 promoter. The enzyme with an N-terminal GST tag or His tag, designated GST-AbADCS or His-AbADCS, was purified with glutathione Sepharose 4B or Ni Sepharose 6 Fast Flow. The enzyme was an aminodeoxychorismate synthase, and it was necessary to add with an aminodeoxychorismate lyase for synthesizing PABA. AbADCS has maximum activity at a temperature of approximately 25℃ and pH 8.0. Magnesium or manganese ions were necessary for the enzymatic activity. The Michaelis-Menten constant for chorismate was 0.12 mM, and 2.55 mM for glutamine. H₂O₂ did distinct damage on the activity of the enzyme, which could be slightly recovered by Hsp20. Sulfydryl reagents could remarkably promote its activity, suggesting that cysteine residues are essential for catalytic function.

• 상하수도학회지
• /
• 제27권6호
• /
• pp.751-759
• /
• 2013

This study is carried out to get the basic design parameters for phospate removal facilites from wastewater by Tobermolite. The phosphate removal by the apatite formation on the surface was affected by several important factors, temperature, ions present in wastewater stream, contact time, recirculation rate, and etc. In case of the temperature, with the increase of temperature, the apatite formation was accelerated. When temperature increased from $15^{\circ}C$ to $35^{\circ}C$, removal efficiency of phosphate increased from 83 % to 93 %. An increase of calcium and fluoride ion content increase the apatite formation, however, bicarbonate and magnesium ion inhibited the crystallization of apatite. As expected, when the recirculation rate was increased from 1 Q to 3 Q, at EBCT (Empty Bed Contact Time) 60min enhanced removal efficiency was observed. The more the recirculation rate increased, the more the removal efficiency increased. According to the results of column experiment using an actual wastewater with low and high phosphate concentration (5 mg/L and 50 mg/L-P), the removal efficiency was 77 % at EBCT of 45 min, and 80 % at 60 min. It was suggested that optimum EBCT was 45 min.

• 한국버섯학회지
• /
• 제11권4호
• /
• pp.181-186
• /
• 2013

${\gamma}$-Aminobutyric acid(GABA) is a four carbon non-protein amino acid that has several well-known physiological functions, such as a postsynaptic inhibitory neurotransmitter in the brain and induction of hypotensive and tranquilizer effects. A lactic acid bacterium was isolated from button mushroom bed, which is showing high GABA productivity by TLC or HPLC analysis. The strain was identified as Lactobacillus hilgardii by analysis of 16S rDNA gene sequence. When the maximum production of GABA by L. hilgardii was investigated with various concentration of monosodium glutamate, the yield of GABA reached to be 53.65 mM at 1% mono sodium glutamate (MSG) in flask cultivation. A Glutamate decarboxylase (GAD) enzyme, which was known to convert MSG to GABA, was purified from a cell-free extract of L. hilgardii and the molecular weights of purified GAD was estimated to 60,000 by SDS-PAGE. The optimum pH and temperature of GAD were at pH4.6 and at $37^{\circ}C$, respectively. The GAD activity was increased by the addition of sulfate ions such as ammonium sulfate, sodium sulfate and magnesium sulfate, indicating that the increase of hydrophobic interaction causes the increase of GAD activity.

• 한국표면공학회지
• /
• 제49권5호
• /
• pp.401-407
• /
• 2016

In this work, effect of zincate treatment of AZ91 Mg alloy on the following electrodeposition of copper was examined in a non-cyanide bath containing pyrophosphate ions in view of surface morphology and adhesion of the electrodeposited copper layer. Without zincate treatment, the electrodeposited copper layer showed very porous structure and poor adhesion. On the other hand, the copper layer electrodeposited on the zincate-treated surface showed dense structure and good adhesion. The dissolution rate of AZ91 Mg alloy after the zincate treatment appeared to decrease about 40 times in the copper pyrophosphate bath, as compared to that of the surface without zincate treatment. The porous morphology and poor adhesion of a copper layer on the AZ91 Mg alloy surface without zincate treatment were attributed to small number of nucleation sites of copper because of rapid dissolution of the magnesium substrate in the pyrophosphate bath. Based on the experimental results, it is concluded that the zincate treatment to form a conducting and protecting layer on the AZ91 Mg alloy surface is essential for successful electrodeposition of a copper layer on AZ91 Mg alloy with good adhesion and dense structure in the copper pyrophosphate bath.

• Journal of Korean Society for Atmospheric Environment
• /
• 제22권E1호
• /
• pp.27-34
• /
• 2006

Although the importance of size-resolved raindrops study has been known, it has not been popularized up to the present. In the present study, an attempt was made to generalize the size-resolved raindrops study by a combination of the frozen raindrop collection method and a commercially available high-performance capillary electrophoresis (HPCE). Samplings were carried out at Kyoto, Japan in October 2002. The inorganic ions (chloride, nitrate, sulphate, calcium, ammonium, sodium, magnesium, potassium) in size classified raindrop samples were successfully analyzed by HPCE with good repeatability. To assure the accuracy and precision of HPCE data, t-test was conducted with paired analytical data, which were experimentally constructed by analyzing standard solutions with HPCE and IC, respectively. T-test showed that there is no notable difference between the concentrations determined by the two analytical methods. Every ionic concentration in both cation and anion was found to be strong raindrop size dependence. Though there was slight increase of sodium and sulphate concentrations between 0.85 mm and 1.15 mm raindrop radius, it showed a strong decrease for every ionic component with increasing droplet radius. The combination of the frozen raindrop collection method and a commercially available HPCE can meet the need of size-resolved raindrops study.

• 공업화학
• /
• 제28권5호
• /
• pp.495-500
• /
• 2017

본 연구에서는 마그네슘 이온 및 (3-aminopropyl)triethoxysilane (APTES)으로 표면에 amine group이 부착된 아미노클레이를 합성(AC)함과 동시에 천연 화합물인 프로폴리스 및 황련 추출물을 클레이 시트 사이에 삽입한 클레이를 합성(PIAC, CIAC)하였다. 주사전자현미경, 입도 분석법, FT-IR, TGA 및 XRD를 통해 클레이의 합성 및 천연 화합물의 삽입을 확인하였고, 특히 XRD data에서 천연 화합물의 삽입에 따른 층간거리(d-space)를 분석함으로써 명확하게 그 특성을 결정하였다. 또한 천연 화합물이 삽입된 클레이인 PIAC 및 CIAC의 경우 삽입되지 않은 아미노클레이(AC)에 비해 항균성이 향상된 것을 최소저해농도(MIC) 분석을 통해 확인하였다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 추계총회 및 학술대회 논문집
• /
• pp.12-13
• /
• 2012

An environmentally friendly method for in situ growth of Mg-Al hydrotalcite (HT) film on AZ31 magnesium alloy has been developed. The growth processes and corrosion resistance of the HT film were investigated. Then the HT film was surface modified by phytic acid solution to further improve the corrosion resistance. The film formation involves the dissolution of AZ31 substrate, adsorption of the ions from solution, nucleation of the precursor, followed by the dissolution of $Al^{3+}$, exchanging of $OH^-$ by $CO{_3}^{2-}$ and growth of the HT film. The HT film is very compact and acts as a barrier against $Cl^-$ attack in the early stage of corrosion, and then the surface of the film is dissolved gradually. This dense HT film can provide effective protection to the AZ31 alloy. The HT film with surface modification by phytic acid presents a self-healing feature and exhibits better corrosion resistance.

• Food Science and Biotechnology
• /
• 제14권1호
• /
• pp.117-122
• /
• 2005

Polyphenoloxidase (PPO) was extracted from Solanum tuberosum Jasim by various chromatographic methods and was subsequently purified and characterized. PPO was purified upto 78-fold from the crude extract. SDS-PAGE profile of the enzyme showed a major subunit of PPO with molecular weight of 40 kDa. The optimum pH and temperature for the maximum activity of PPO was 6.5 and $25^{\circ}C$, respectively. The enzyme was found to be quite stable between 10 and $40^{\circ}C$, whereas it was almost inactivated at $70^{\circ}C$ when incubated for 30 min. Substrate specificity study indicated that catechol was the most suitable substrate for PPO isolated from purple-fleshed potato with a $K_m$ value of 21.1 mM. The most effective inhibitor was ascorbic acid, followed by L-cysteine, citric acid, EDTA, and boric acid. Studies on the effect of metal ion on PPO activity showed that magnesium and copper were inhibitory, while iron and zinc ions increased the activity of PPO.