• Bulletin of the Korean Chemical Society
• /
• 제33권2호
• /
• pp.608-612
• /
• 2012

We investigated the cycling behavior of $Li_4Ti_5O_{12}$ electrode in a cross-linked gel polymer electrolyte based on non-flammable ionic liquid consisting of 1-butyl-1-methylpyrrolidinium bis(trifluoromethanesulfonyl) imide and vinylene carbonate. The $Li_4Ti_5O_{12}$ electrodes in ionic liquid-based gel polymer electrolytes exhibited reversible cycling behavior with good capacity retention. Cycling data and electrochemical impedance spectroscopy analyses revealed that the optimum content of the cross-linking agent necessary to ensure both acceptable initial discharge capacity and good capacity retention was about 8 wt %.

• Bulletin of the Korean Chemical Society
• /
• 제34권9호
• /
• pp.2594-2596
• /
• 2013

Highly chemo- and regioselective reaction of hydroxybenzenes with ${\alpha},{\beta}$-unsaturated compounds in acidic ionic liquid l-butyl-3-methylimidazolium hydrogen sulphate ([BMIM]HSO4) was reported for the first time. A series of oxa-Michael adducts and Friedel-Crafts alkylated products were synthesized with good yields. The acidic ionic liquid could be easily recycled for at least 5 times with only minor loss in activity.

• Mass Spectrometry Letters
• /
• 제11권1호
• /
• pp.6-9
• /
• 2020

Matrix-assisted laser desorption/ionization-mass spectrometry (MALDI-MS) analysis of ionic liquid matrices (ILMs) prepared using pyridine and dihydroxybenzoic acid (DHB), such as 2,3-DHB and 2,5-DHB, displayed an unconventional peak at m/z 232.0, which was regarded as [DHB+pyridine-H]⁺. The peak at m/z 232.0 was not observed from other ILMs prepared using other DHB isomers, such as 2,4-DHB, 2,6-DHB, 3,4-DHB, and 3,5-DHB. Two requirements to observe the peak at m/z 232.0 in a DHB/pyridine ILM are suggested. First, carboxyl and hydroxyl groups must be located ortho to each other. Second, the secondary hydroxyl group must be located at a carbon with a high electron density. Based on these two requirements, a potential mechanism for the generation of the peak at m/z 232.0 is suggested.

• Bulletin of the Korean Chemical Society
• /
• 제32권3호
• /
• pp.973-976
• /
• 2011

The addition of organic ligand (${\beta}$-diketone or heterocyclic compound) to the europium (III)-containing ionic liquid resulted in bright luminescent soft materials with the molar ratio of europium/ionic liquid (IL)/ligand being 1:3:1 that exhibit bright red light under UV lamp. The luminescent properties such as emission features and lifetime of $^5D_0$ $Eu^{3+}$ excited level are dependent on the organic ligands. The materials were characterized by FT-IR and luminescence spectroscopy. The data shows that at least parts of the ILs (carboxylic acid) are replaced with ${\beta}$-diketone ligand rather than the formation of europium complex with the molar ratio of $Eu^{3+}$:IL: ligand being 1:3:1, while no ILs could be replaced by the heterocyclic ligand such as Bpy and Phen.

• Bulletin of the Korean Chemical Society
• /
• 제30권12호
• /
• pp.3107-3108
• /
• 2009

• Bulletin of the Korean Chemical Society
• /
• 제31권12호
• /
• pp.3842-3843
• /
• 2010

• Bulletin of the Korean Chemical Society
• /
• 제26권10호
• /
• pp.1493-1494
• /
• 2005

• 펄프종이기술
• /
• 제45권2호
• /
• pp.56-65
• /
• 2013

Electron beam treatment was applied for improving dissolution of cellulose with ionic liquids. Two ionic liquids, 1-allyl-3-methylimidazolium chloride ([Amim]Cl]: AC) and 1,3-dimethylimidazolium methylphosphite ([Dmim][$(MeO)(H)PO_2$]: Me) were used for this experiment. Treatment with electron beams up to dose of 400 kGy resulted in the increase of hot water extract and alkali extract of cotton pulp and the great reduction in the molecular weight of cellulose. For the dissolution of cotton pulp with two ionic liquids, the electron beam treated samples showed faster dissolution. The dissolved cellulose with Me ionic liquid were regenerated with acetonitrile and the structure of regenerated cellulose showed distinct difference depending on the electron beam treatment. Those results provide the electron beam pre-treatment could be applied as an energy efficient and environmentally benign method to increase the dissolution of cellulose with ionic liquids.

• Korean Chemical Engineering Research
• /
• 제48권5호
• /
• pp.621-626
• /
• 2010

본 연구에서는 이미다졸계의 이온성액체를 폴리스티렌계 고분자에 고정화시킨 촉매를 제조하고, 알릴글리시딜에테르(AGE)와 이산화탄소의 부가반응을 통한 알릴글리시딜카보네이트의 합성반응에서 이 촉매의 반응특성을 고찰하였다. 고정화된 이온성액체는 공중합된 폴리스티렌계 고분자에 이미다졸이 고정화됨으로써 형성되었다. 제조된 촉매에 대해서 EA, FT-IR, TGA 그리고 SEM 등 다양한 기기분석을 통하여 특성분석을 수행하였다. 고정화된 이온성액체 촉매는 반응온도 $120^{\circ}C$, 이산화탄소 압력 1.48 MPa에서 AGE 전환율이 80%이고 생성물의 선택도가 96% 이상으로 우수한 반응성을 나타내었다. 또한 고정화된 이온성액체 촉매는 4회 연속 사용하여도 초기의 활성이 크게 감소하지 않아 안정성이 좋은 것으로 나타났다.

• Korean Chemical Engineering Research
• /
• 제54권3호
• /
• pp.374-379
• /
• 2016

이온성 액체를 보조용매로 이용할 경우 바이오매스로부터 파클리탁셀의 추출 효율은 획기적으로 개선되지만 잔류 이온성 액체로 후속 농축 및 건조에 많은 어려움이 따른다. 따라서 본 연구에서는 공정 효율 향상을 위하여 이온성 액체를 이용한 바이오매스 추출물을 효과적으로 건조할 수 있는 새로운 방법을 개발하였다. 추출물을 물로 전처리하고 추가적으로 세척함으로써 잔류 이온성 액체 제거를 통해 효과적으로 건조할 수 있었다. 물 전처리을 위한 최적의 시료/물 비, 혼합시간 및 추가세척을 위한 최적의 시료/물 비는 각각 1:70 (w/v), 4분, 1:100 (w/v)이었다. 또한 진공 건조보다 마이크로웨이브를 이용한 건조의 경우 건조시간을 9배 정도 단축 가능하여 공정 효율이 획기적으로 개선될 것으로 판단된다.