• Journal of Advanced Marine Engineering and Technology
• /
• 제32권5호
• /
• pp.759-767
• /
• 2008

Bending deformation of an ionic polymer actuator(IPA) on applied low electric field across its thickness is dominated by electroosmosis of hydrated ions and self-diffusion of free water molecules. In the study by Popovic et al., two processes are assumed to occur sequentially in the way that fast electroosmosis is followed by self-diffusion and finite element formulation for the basic field equations are proposed. However the motions of hydrated ions and water molecules occur at the same time. In this study, those two processes are considered simultaneously and finite element formulation is conducted for the basic field equations governing electrochemical response of an IPA. Some numerical studies for IPA are carried out in order to show the validity of the present formulation.

• 한국기계가공학회지
• /
• 제7권4호
• /
• pp.24-30
• /
• 2008

The laminate IPMC actuator have been developed with a commercial Nafion film and platinum electrodes. Equivalent beam and equivalent bimorph beam models for IPMC(Ionic Polymer-Metal Composite) actuators are described. By using a beam equation with estimated physical properities and actuation displacements of a cantilevered IPMC actuator are estimated. And Finite element analysis(FEA) was done by ANSYS.

• 한국토양비료학회지
• /
• 제38권5호
• /
• pp.238-246
• /
• 2005

두 가지 이상의 중금속이온이 토양에 존재할 때 토양입자표면에 흡착되는 중금속 이온은 복합적인 경쟁이온치환과 특정결합기작에 따라 흡착량이 결정된다. 본 연구는 충남 논산과 대전시 유성에 소재하는 밭토양에서 채취한 사질식양토와 식토를 공시토양으로 하여 중금속의 다중경쟁흡착특성을 조사하였다. 경쟁흡착은 조사 대상 중금속인 Cr, Cd, 및 Pb를 토양용액에 처리 농도를 달리하여 단일, 이중, 삼중체계로 처리하였다. 등온흡착은 평형농도가 증가함에 따라 흡착이 증가하는 경향을 보여주었으며 이중과 삼중체계에서는 동일 평형농도에서 흡착량은 각각의 중금속이온의 농도와 중금속 전하에 의해 영향을 받는 것으로 조사되었다. 3가지 중금속이온의 이중경쟁 흡착특성은 전기음성도는 낮으나 이온포텐셜이 높은 Cr 이온이 경쟁이온 보다 선택적 흡착특성을 보여주고 있으며 Cd와 Pb가 Cr 흡착에 미치는 영향은 유사한 것으로 조사되었다. 따라서 본 연구 결과 3중 경쟁 흡착 시 중금속 이온의 흡착량이 단일과 이중 경쟁흡착보다 증가하는 특성을 구명하기 위해서는 다중 형태로 존재하는 중금속이온의 흡착기작과 다중 형태상의 중금속이온의 반응식, 그리고 반응식에 따른 가수분해상수를 구하여 흡착정도와 경쟁 상태에 대한 추가 연구가 필요하다. 결론적으로 다중 중금속이온이 존재하는 상태 하에서 흡착친화도는 토양 내 중금속이온의 이동성과 불용화 및 가용화 사이의 분배특성에 영향을 주는 것으로 판단되었다.

• Nuclear Engineering and Technology
• /
• 제54권5호
• /
• pp.1616-1622
• /
• 2022

Selenium has been identified as an element of interest for the safety assessment of a deep geological repository (DGR) for used nuclear fuel. In Canada, groundwaters at DGR depths in sedimentary rocks have been observed to have a high ionic strength. This paper examines the sorption behavior of Se(-II) onto illite, MX-80 bentonite, Queenston shale, and argillaceous limestone in Na-Ca-Cl solutions of varying ionic strength (0.1-6 mol/kgw (m)) and across a pH range of 4-9. Little ionic strength dependence for Se(-II) sorption onto all solids was observed except that sorption at high ionic strength (6 m) was generally slightly lower than sorption at low ionic strength (0.1 m). Illite and MX-80 exhibited the expected results for anion sorption, while shale and limestone exhibited more constant sorption across the pH range tested. A non-electrostatic surface complexation model successfully predicted sorption of Se(-II) onto illite and MX-80 using the formation of an inner-sphere surface complex and an outer-sphere surface complex. Optimized values for the formation reactions of these surface species were proposed.

• 제어로봇시스템학회논문지
• /
• 제10권11호
• /
• pp.1012-1016
• /
• 2004

In the present paper, equivalent beam and equivalent bimorph beam models for IPMC(ionic Polymer-Metal Composite) actuators are described. Physical properties of an IPMC, such as Young's modulus and electro-mechanical coupling coefficient. are determined from the rule of mixture, bimorph beam equations, and measured force-displacement data of a cantilevered IPMC actuator. By using a beam equation with estimated physical properties, actuation displacements of a cantilevered IPMC actuator was calculated and a good agreement between the computed tip displacements and the measured data was observed. Finite element analysis(FEA) combined with the estimated physical properties was used to reproduce the force-displacement relationship of an IPMC actuator. Results from the FEA agreed well with the measure data. The proposed models might be used for modeling of IPMC actuators with complicated shapes and boundary conditions.

• Computers and Concrete
• /
• 제13권2호
• /
• pp.149-171
• /
• 2014

This study presents the mathematical model for predicting chloride penetration into saturated concrete under non-isothermal condition. The model considers not only diffusion mechanism but also migration process of chloride ions and other chemical species in concrete pore solution such as sodium, potassium, and hydroxyl ions. The coupled multi-ionic transport in concrete is described by the Nernst-Planck equation associated with electro-neutrality condition. The coupling parameter taken into account the effect of temperature on ion diffusion obtained from available test data is proposed and explicitly incorporated in the governing equations. The coupled transport equations are solved using the finite element method. The numerical results are validated with available experimental data and the comparison shows a good agreement.

• 센서학회지
• /
• 제32권4호
• /
• pp.252-256
• /
• 2023

A one-step method for nanoscale patterning of silver ionic ink on a substrate is developed using a microscale, elastic mold deformation. This method yields unique micro/nanoscale metallic structures that differ from those produced using the original molds. The linewidth of these metallic structures is significantly reduced (approximately 10 times) through the sidewall deformation of the original mold cavity on a thin liquid film, as verified by finite element analysis. The process facilitates the fabrication of various, isolated and complex micro/nanoscale metallic structures with negligible residual layers at low cost and high throughput. These structures can be utilized for various applications, including optoelectronics, wearable sensors, and metaverse-related devices. Our approach offers a promising tool for manipulation and fabrication of micro/nanoscale structures of various functional materials.

• 한국토양비료학회지
• /
• 제34권3호
• /
• pp.213-236
• /
• 2001

토양용액의 이온조성은 작물의 양분흡수와 밀접한 관계를 가지고 있으며 양분의 이온조성을 추정하기 위하여 많은 모델이 개발되어 사용되고 있다. 토양용액 중 분석되는 양분의 몰농도는 insoluble 이온쌍과 평형을 이루고 있는 soluble 이온과 이온쌍 그리고 complex등의 농도로 간주하고, 양이온과 음이온을 동시에 고려한 양분의 이온조성을 추정하기 위하여 분석된 양분의 몰농도에 따른 선정된 평형식의 평형상수에 대한 conditional equilibrium constant를 구하여 모든 평형식이 만족되는 이온과 이온쌍의 몰농도를 구하는 모델을 설정하였다. 본 모델 이용시 기본적으로 필요한 성분은 pH, Eh, EC, 양이온 8종(K, Ca, Mg, Na, Fe, Mn, Al, $NH_4{^+}$, 음이온 6종(Si, 5, p Cl, $NO_3{^-}$, $HCO_3{^-}$)이며 다른 성분도 추가할 수 있도록 하였다. 토양과 토양용액이 평형조건인 경우 추정된 이온과 이온쌍의 조성과 이에 따른 존재 가능한 침전량과 mineral 종류별 함량을 계산하였다.

• 한국환경과학회지
• /
• 제30권6호
• /
• pp.465-474
• /
• 2021

This research investigated the characteristics of fine particle concentration and ionic elements of PM_2.5 during sea breeze occurrences during summertime in Busan. The PM₁₀ and PM_2.5 concentrations of summertime sea breeze occurrence days in Busan were 46.5 ㎍/m³ and 34.9 ㎍/m³, respectively. The PM₁₀ and PM_2.5 concentrations of summertime non-sea breeze occurrence days in Busan were 25.3 ㎍/m³ and 14.3 ㎍/m³, respectively. The PM_2.5/PM₁₀ ratios of sea breeze occurrence days and non-sea breeze occurrence days were 0.74 and 0.55, respectively. The SO₄^2-, NH₄⁺, and NO₃^- concentrations in PM_2.5 of sea breeze occurrence days were 9.20 ㎍/m³, 4.26 ㎍/m³, and 3.18 ㎍/m³ respectively. The sulfur oxidation ratio (SOR) and nitrogen oxidation ratio (NOR) of sea breeze occurrence days were 0.33 and 0.05, respectively. These results indicated that understanding the fine particle concentration and ionic elements of PM_2.5 during sea breeze summertime conditions can provide insights useful for establishing a control strategy of urban air quality.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권3호
• /
• pp.369-375
• /
• 2010

The two-dimensional finite element formulation for the basic field equations governing electrochemical responses of ionic conducting polymer-metal composite(IPMC) actuators is proposed in the present study. Biaxial deformation of a platinum plated Nafion actuator having 4 electrodes is dominated by electro-osmosis of hydrated ions and self-diffusion of free water molecules. Some numerical studies for IPMC actuators with electric field are carried out in order to show the validity of the proposed formulation and electric field analysis for the initial condition of total charge distribution are conducted using commercial code ANSYS/Emag.