• Bulletin of the Korean Chemical Society
• /
• 제32권6호
• /
• pp.2003-2007
• /
• 2011

We report a highly sensitive surface-enhanced Raman scattering (SERS) platform for the selective trace analysis of mercury (II) ions in drinkable water using aptamer-conjugated silver nanoparticles. Here, an aptamer designed to specifically bind to $Hg^{2+}$ ions in aqueous solution was labelled with a TAMRA moiety at the 5' end and used as a Raman reporter. Polyamine spermine tetrahydrochloride (spermine) was used to promote surface adsorption of the aptamer probes onto the silver nanoparticles. When $Hg^{2+}$ ions are added to the system, binding of $Hg^{2+}$ with T-T pairs results in a conformational rearrangement of the aptamer to form a hairpin structure. As a result of the reduced of electrostatic repulsion between silver nanoparticles, aggregation of silver nanoparticles occurs, and the SERS signal is significantly increased upon the addition of $Hg^{2+}$ ions. Under optimized assay conditions, the concentration limit of detection was estimated to be 5 nM, and this satisfies a limit of detection below the EPA defined limit of 10 nM in drinkable water.

• Macromolecular Research
• /
• 제15권6호
• /
• pp.553-559
• /
• 2007

Nanocomposite films were prepared by sol-gel synthesis from vanadium triisopropoxide with $poly((oxyethylene)_9$ methacrylate)-graft-poly(dimethyl siloxane), POEM-g-PDMS, producing in situ growth of vanadium oxide within the continuous ion-conducting POEM domains of micro phase-separated graft copolymer. The formation of vanadium oxide was confirmed by wide angle x-ray scattering (WAXS) and Fourier transform infrared (FT-IR) spectroscopy. Small angle x-ray scattering (SAXS) revealed the spatially-selective incorporation of vanadium oxide in the POEM domains. Upon the incorporation of vanadium oxide, the domain periodicity of the graft copolymer monotonously increased from 17.2 to 21.0 nm at a vanadium content 14 v%, above which it remained almost invariant. The selective interaction of vanadium oxide with POEM was further verified by differential scanning calorimetry (DSC) and FT-IR spectroscopy. The nanocomposite films exhibited excellent mechanical properties $(l0^{-5}-10^{-7}dyne/cm^2)$, mostly due to the confinement of vanadium oxide in the POEM chains as well as the interfaces created by the microphase separation of the graft copolymer.

• Macromolecular Research
• /
• 제16권8호
• /
• pp.676-681
• /
• 2008

The $\pi$-complex membranes of poly(styrene-b-(ethylene-co-butylene)-b-styrene) (SEBS) of two silver salts of $AgBF_4$ and $AgCF_3SO_3$ were prepared and tested for the separation of the propylene/propane mixtures. The Fourier-transform infrared (FT-IR) spectra of these complexes showed that the silver salts were dissolved in SEBS up to a silver mole fraction of 0.14, due to $\pi$-complexation between the aromatic C=C bonds of styrene blocks and silver ions. Above this solubility limit, ion pairs and high-order ionic aggregates began to form, so that silver salts were distributed unselectively in both the EB and PS blocks. The domain size of the PS blocks was enlarged up to this critical concentration with increasing silver concentration without structural transitions, as confirmed by small angle x-ray scattering (SAXS). These structural properties of the SEBS/silver salt complexes may explain the lower separation properties for propylene/propane mixtures compared to poly(styrene-b-butadiene-b-styrene)(SBS)/silver salt complex membranes.

• Nuclear Engineering and Technology
• /
• 제55권4호
• /
• pp.1287-1299
• /
• 2023

A new Monte-Carlo-based computer program (RDS-BASIC) is developed to simulate the transport of energetic ions in pure matter. This computer program is utilizing an algorithm that uses detailed numerical solutions for the classical scattering integral for evaluating the outcomes of the binary collision processes. This approach is adopted by several prominent similar simulation programs and is known to provide results with higher accuracy compared to other approaches that use approximations to shorten the simulation time. Furthermore, RDS-BASIC simulation program contains special methods to reduce the displacement energy threshold of surface atoms. This implementation is found essential for accurate simulation results for sputtering yield in the case of very low energy ions irradiation (near sputtering energy threshold) and also successfully solve the problem of simultaneously obtaining an acceptable number of atomic displacements per incident ions. Results of our simulation for several irradiation systems are presented and compared with their respective TRIM (SRIM-2013) and the state-of-the-art SDTrimSP simulation results. Our sputtering simulation results were also compared with available experimental data. The simulation execution time for these different simulation programs has also been compared.

• 한국의학물리학회지:의학물리
• /
• 제31권2호
• /
• pp.9-19
• /
• 2020

Purpose: This study aims to develop a multi-purpose electron beam irradiation device for preclinical research and material testing using the research electron linear accelerator installed at the Dongnam Institute of Radiological and Medical Sciences. Methods: The fabricated irradiation device comprises a dual scattering foil and collimator. The correct scattering foil thickness, in terms of the energy loss and beam profile uniformity, was determined using Monte Carlo calculations. The ion-chamber and radiochromic films were used to determine the reference dose-rate (Gy/s) and beam profiles as functions of the source to surface distance (SSD) and pulse frequency. Results: The dose-rates for the electron beams were evaluated for the range from 59.16 Gy/s to 5.22 cGy/s at SSDs of 40-120 cm, by controlling the pulse frequency. Furthermore, uniform dose distributions in the electron fields were achieved up to approximately 10 cm in diameter. An empirical formula for the systematic dose-rate calculation for the irradiation system was established using the measured data. Conclusions: A wide dose-rate range electron beam irradiation device was successfully developed in this study. The pre-clinical studies relating to FLASH radiotherapy to the conventional level were made available. Additionally, material studies were made available using a quantified irradiation system. Future studies are required to improve the energy, dose-rate, and field uniformity of the irradiation system.

• 한국결정성장학회지
• /
• 제5권3호
• /
• pp.261-268
• /
• 1995

소성서냉법으로$K_2Ti_4O_9$ 중간상 휘스커를 제조한 다음, 비등수 및 산처리에 의하여$K_2Ti_6O_{13}$ 휘스커로 상전이 시키는데 있어서, 비등수 및 산처리 시간과 농도가 상전이 및 휘스커의 표면과 해섬(scattering a bundle of whisker)에 미치는 영향을 알아보았다. 그 결과 휘스커의 표면상태가 개선되었으며, 아울러 휘스커 간에 해섬을 유도하여 직경이 작으면서도 aspect ratio가 큰 양질의 휘스커를 얻을 수 있었다. 비등수 및 산처리는 휘스커의$K_2Ti_4O_9 {\leftrightarro} K_2Ti_6O_{13}$상전이를 유도하였는데 이러한 상전이는 $K^+$ 이온의 용출에 의해 진행되었다.

• 대한기계학회논문집B
• /
• 제23권11호
• /
• pp.1379-1389
• /
• 1999

A new technique for control of size and shape of flame-made particles is Introduced. The characteristic sintering time can be controlled Independently of collision time by heating the particles with irradiation of laser because the sintering time strongly depends on temperature. A coflow oxy-hydrogen diffusion flame burner was used for $SiCl_4$ conversion to silica particle. Nanometer sized aggregates irradiated by a high power CW $CO_2$ laser beam were rapidly heated up to high temperatures and then were sintered to approach volume-equivalent spheres. The sphere collides much slower than the aggregate, which results in reduction of sizes of particles maintaining spherical shape. Light scattering of Ar ion laser and TEM observation using a local sampling device were used to confirm the above effects. When the $CO_2$ laser was irradiated at low position from the burner surface, particle generation due to gas absorption of laser beam occurred and thus scattering intensity increased with $CO_2$ laser power. At high irradiation position, scattering intensity decreased with $CO_2$ laser power and TEM image showed a clear mark of evaporation and recondensation of particles for high $CO_2$ laser power. When the laser was irradiated between the above two positions where small aggregates exist, average size of spherical particles obviously decreased to 58% of those without $CO_2$ laser irradiation with the spherical shape. Even for increased carrier gas flow rate by a factor of three, TEM photograph also revealed considerable reduction of particle size.

• Asian Journal of Atmospheric Environment
• /
• 제7권3호
• /
• pp.129-138
• /
• 2013

The water uptake by fine aerosol in the atmosphere has been investigated at Gosan, Korea during ABC-EAREX 2005. The concentration of inorganic ion and carbon components, size distribution, and light scattering coefficients in normal and dry conditions were simultaneously measured for $PM_{2.5}$ by using a parallel integrated monitoring system. The result of this study shows that ambient fine particles collected at Gosan were dominated by water-soluble ionic species (35%) and carbonaceous materials (18%). In addition, it shows the large growth of aerosol in the droplet mode when RH is higher than 70%. Size distribution of the particulate surface area in a wider size range ($0.07-17{\mu}m$) shows that the elevation of RH make ambient aerosol grow to be the droplet mode one around $0.6{\mu}m$ or the coarse mode one, larger than $2.5{\mu}m$. Hygroscopic factor data calculated from the ratio of aerosol scattering coefficients at a given ambient RH and a reference RH (25%) show that water uptake began at the intermediate RH range, from 40% to 60%, with the average hygroscopic factor of 1.10 for 40% RH, 1.11 for 50% RH, and 1.17 for 60% RH, respectively. Finally, average chemical composition and the corresponding growth curves were analyzed in order to investigate the relationship between carbonaceous material fraction and hygroscopicity. As a result, the aerosol growth curve shows that inorganic salts such as sulphate and nitrate as well as carbonaceous materials including OC largely contribute to the aerosol water uptake.

• 대한화학회지
• /
• 제59권4호
• /
• pp.271-279
• /
• 2015

음이온성 계면활성제인 sodium dodecanoate과 sodium n-octanoate의 혼합미셀 물성인 임계미셀농도(CMC), 반대이온의 결합상수(B), 및 미셀형성 응집수(N^*) 등을 여러 조성에서 전기전도도법과 광산란법으로 조사하였다. 여러 혼합조성에서의 혼합미셀 형성에 대한 실험 결과는 이상용액의 예측 거동과는 상당히 벗어났으므로, 정규용액 이론에 기반을 둔 Rubingh 모델과 Motomura 모델을 이용하여 분석하였다. 또 미셀 형성에 대한 표준 Gibbs 에너지 ΔG^micel,0는 전체 조성에서 음의 값이 얻어져 혼합미셀의 안정성을 확인할 수 있었으며, 이러한 ΔG^micel,0 측정값은 이론적 계산치와 실험 오차 내에서 일치하였다.

• 한국광학회지
• /
• 제18권6호
• /
• pp.452-460
• /
• 2007

ZERODUR와 용융 석영으로 저산란 반사경을 제작하고 산란 특성을 연구하였다. Bowl feed 법을 이용하여 초연마면인 표면거칠기 0.326 ${\AA}$인 용융 석영 기판과 표면거칠기 0.292 ${\AA}$의 ZERODUR 기판을 얻었다. 이온빔 스퍼터링 방법으로 초연마된 기판 위에 $SiO_2$와 $Ta_2O_5$를 교번으로 22층을 증착하여 다층박막 고반사 거울을 얻었다. 용융 석영 반사경과 ZERODUR 반사경의 산란이 각각 4.6 ppm과 30.9 ppm으로 측정되었으며, 이로부터 산란이 매우 작은 경우 기판의 표면거칠기가 산란을 결정하는 주요 파라미터가 아니라는 것을 알았다. 나아가 반사경의 표면거칠기를 AFM으로 측정한 결과. ZERODUR 반사경이 용융 석영 반사경 보다 박막의 표면거칠기가 2.3배 더 높게 측정 되었다. 이 결과는 기판-박막 경계면에서 박막 형성 초기에 기판의 화학조성 또는 결정방향과 증착물질의 상호관계로 인하여 박막 형성 초기에 표면거칠기가 급격히 나빠져서 발생하는 것으로 유추되었다. SEO 300A으로 접촉각 측정을 하여 Giriflaco-Good-Fowkees-Young 방법으로 표면에너지를 계산하였다. 표면거칠기 0.46 ${\AA}$을 갖는 용융 석영 기판이 표면거칠기 0.31 ${\AA}$을 갖는 ZERODUR 기판보다 접촉각이 더 작고 표면에너지는 크게 나타났다. 이러한 차이가 기판 종류에 따라 박막형성 초기에 표면거칠기를 다르게 하는 한 요인으로 판단되며, 기판의 표면에너지가 높을수록 미려한 박막표면을 얻는 것으로 확인되었다. ZERODUR의 표면에너지 차이를 설명하기 위해 XPS 분석으로 용융 석영은 Si, O로 구성되었고 ZERODUR는 Si, O, Al, Na 그리고 F로 구성되었다는 것을 알 수 있었다.