• 대한화학회지
• /
• 제36권5호
• /
• pp.621-626
• /
• 1992

수용액 중에서 요오드와 $4-(C_9H_{19})C_6H4_O(CH_2CH_2O)_{40} [NP-(EO)_40]$간의 charge transfer(CT) 상호작용에 미치는 $Ca^{2+}$이온의 영향을 UV-visible spectrophotometer를 이용하여 조사하였다. CT 상호작용에 따른 최대 흡수는 390 nm 부근에서 나타났으며, $Ca^{2+}$ 이온 존재하에서는 370 nm 영역으로 이동되었다. 계면활성제 농도를 CMC 이상에서 고정시켰을 때, CT 상호작용에 따른 최대흡수곡선의 강도가 $Ca^{2+}$이온 첨가 농도에 따라 증가하다가 감소하는 변곡점을 보였다. CT 상호작용에 기인한 흡수곡선의 강도가 증가하는 것은 $Ca^{2+}$이온 존재하에서 미셀 구조가 더욱 조밀해진데 다른 요오드와의 donor-acceptor overlap 증가로 볼 수 있다. 이러한 현상들은 수용액 중에서 상대적으로 자유로이 여러가지 배향을 가질 수 있는 비이온성 계면활성제의 선형 oxyethylene(EO) 사슬이 유사 크라운 에테르 구조를 형성하여 $Ca^{2+}$이온과 착물을 형성할 수 있는 가능성을 보여준다.

• 분석과학
• /
• 제24권4호
• /
• pp.243-248
• /
• 2011

루미놀 화학발광 시스템(luminol-$H_2O_2$)을 이용하여 수용액 중의 수은(II) 이온을 선택적으로 정량분석 하였다. 루미놀과 과산화수소의 반응에서 촉매작용을 하는 구리(II), 철(III), 크롬(III) 이온 등 다양한 금속이온의 농도를 정량분석한 연구결과가 보고되어 있다. 본 연구에서는 수은(II) 이온이 루미놀과 과산화수소의 반응에서 다른 금속이온과 같이 촉매작용을 하는 것을 관찰하였으며, 수용액 중 수은(II) 이온의 정량분석 조건을 최적화하기 위하여 반응시간, pH등에 따른 영향을 조사하였다. 또한 수은이온이 갖는 1가와 2가 산화수 중에서 수은(I) 이온은 루미놀과 과산화수소의 반응에 있어서 촉매작용을 하지 않았을 뿐만 아니라 반응에 어떠한 영향도 미치지 않았다. 또한 수은(I)과 수은(II) 이온이 공존하는 수용액 중의 수은(II) 이온의 분석과정에서 수은(I) 이온의 방해 효과는 관찰되지 않았다. 이를 바탕으로 하여 루미놀 화학발광 시스템을 이용하여 수용액 중의 수은(II) 이온만 선택적으로 분석하는 것이 가능하다는 결과와 함께 화학발광분석법과 ICP분석법으로부터 얻은 실험결과를 비교하여 수용액 내에 존재하는 수은 이온의 산화수별 농도를 확인할 수 있다. 루미놀 화학발광 시스템의 최적 분석조건 하에서, 수용액 중의 선택적 수은(II) 이온의 정량분석을 위해 얻은 검정곡선에서 직선성이 성립하는 농도범위는 $1.25{\times}10^{-5}{\sim}2.50{\times}10^{-3}M$이며, 이때 상관계수는 0.991이고, 검출한계는 $1.25{\times}10^{-7}M$이었다.

• Journal of Pharmaceutical Investigation
• /
• 제14권3호
• /
• pp.131-135
• /
• 1984

염산디싸이클로민은 항(抗)콜린성(性) 약물로 소화성궤양(消化性潰瘍) 치료제로서 제산제(制酸劑)와 함께 널리 사용되고 있다. 전보(前報) 에서 이 약물의 수용액(水溶液)에서의 가수분해반응기구연구(加水分解反應機構硏究)를 통하여 반응차수(反應次數) 및 속도(速度) 등을 보고(報告)한 바 있으며 본(本) 연구(硏究)에서는 수용액(水溶液)에서의 가수분해(加水分解)에 미치는 pH의 영향을 검토하였고 또한 제산제성분(制酸劑成分)인 magnesium ion이 가수분해(加水分解)에 미치는 영향 등을 검토하였다.

• 약학회지
• /
• 제18권2호
• /
• pp.133-144
• /
• 1974

The metal indicator, acidic azo dyes NN, EBT and Calcon are utilized to analyse quantitatively chlorpheniramine, tripelenamine and diphenhydramine forming insoluble ion pair in aqueous solution at proper pH values between the acidic azo dyes and the sample molecules, these compexes are extracted by organic polar solvents, and organic layer is determined spectrophotometrically. Generally, the absorption maxima of the complexes are shifted to longer wavelengths compare to the absorption maxima of the dyes themselves. The binding ratio of the ion pair forming complex molecules in chloroform soln, are as follows ; NN-antihistamines (chlorpheniramine, tripelennamine, diphenhydramine) are NN-1 to antihisamine-1, EBT-antihistamines are EBT-2 to antithistamines a and Calcon-antihistamines are Calcon-3 to antithistamines-1. These coomplexes in chloroform soln. are very stable, and show higher absorbance than the other organic polar solvents. The binding state of complexes were presumed intermolecular hydrogen bond by their infrared spectra. In the mixture solution of three samples, the aqueous phase is buffered at pH 1.0, and benzene is used to extract ion pair of diphenhydramine EBT complex selectively. At pH 1.0 of aqueous layer, Calon-diphenhydramine complex is also extracted selectively by benzene. However, in this case very small amount of chlorpheniramine-calcon calcon simultaneously. The binding state of diphenhydramine-EBT and diphenhydramine-calcon in benzene are smae as the complexes in chloroform. But the absorption maxima of the complexes in benzene are shifted to shorter wavelenlgths than the complexes in chloroform.

• 전기화학회지
• /
• 제6권2호
• /
• pp.158-160
• /
• 2003

We have reported to make nanostructured cobalt oxide electrode that have large capacitance over than 400 F/g (specific capacitance) and good cycleability. But, it had serious demerits of low voltage range under 0.5 V and low power density. Therefore, we need to increase voltage range of cobalt oxide electrode. We report here on the electrochemical properties of sol-gel-derived nanoparticulate cobalt xerogel in 1M KOH solution and aqueous polymeric gel electrolyte. In solution electrolyte, cobalt oxide electrode had over 250 F/g capacitance consisted of EDLC and pseudocapacitance. In gel electrolyte, cobalt oxide electrode had around 100 F/g capacitance. This capacitance was only electric double layer capacitance of active surface area. In solution electrolyte, potassium ion as working ion reacted with both of layers easily. However, In gel electrolyte, reacted with only surface-active layer. Itis very hard to reach resistive layer. So, we have studied on pretreatment of electrode to contain working ions easily. We'll report more details.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.93-96
• /
• 2001

We have reported to make nanostructured cobalt oxide electrode that have large capacitance over than 400F/g (specific capacitance) and good cycleability. But, It had serious demerits of low voltage range under 0.5V and low power density. Therefore, we need to increase voltage range of cobalt oxide electrode. we report here on the electrochemical properties of sol-gel-derived nanoparticulate cobalt xerogel in 1M KOH solution and aqueous polymeric gel electrolyte. In solution electrolyte, cobalt oxide electrode had over than 250F/g capacitance consisted of EDLC and pseudocapacitance. In gel electrolyte, cobalt oxide electrode had around l00F/g capacitance. This capacitance was only surface EDLC. In solution electrolyte, potassium ion as working ion reacted with both of layers easily. However, In gel electrolyte, reacted with only surface-active layer. Its very hard to reach resistive layer. So, we have studied on pretreatment of electrode to contain working ions easily. We'll report more details.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.93-96
• /
• 2001

We have reported to make nanostructured cobalt oxide electrode that have large capacitance over than 400F/g (specific capacitance) and good cycleability. But, It had serious demerits of low voltage range under 0.5V and low power density. Therefore, we need to increase voltage range of cobalt oxide electrode. we report here on the electrochemical properties of sol-gel-derived nanoparticulate cobalt xerogel in 1M KOH solution and aqueous polymeric gel electrolyte. In solution electrolyte, cobalt oxide electrode had over than 250F/g capacitance consisted of EDLC and pseudocapacitance. In gel electrolyte, cobalt oxide electrode had around 100F/g capacitance. This capacitance was only surface EDLC. In solution electrolyte, potassium ion as working ion reacted with both of layers easily. However, In gel electrolyte, reacted with only surface-active layer. Its very hard to reach resistive layer. So, e have studied on pretretmetn of electrode to contain working ions easily. We'll report more details.

• 분석과학
• /
• 제14권4호
• /
• pp.306-310
• /
• 2001

황상용액 매질에서 요오드 음이온을 흡착제에 흡착시킨 후 황산용액에 남아있는 요오드 음이온을 정량하기 위해 이온 크로마토그래피를 적용하였다. 산화제 작용을 하는 황산의 농도를 0.25 M, 0.5 M, 1 M로 변화시키고 요오드 음이온을 각각 첨가한 후 시간변화에 따라 요오드 음이온이 산화되는 정도를 측정하였다. 황산농도가 진할수록 요오드 음이온은 산화되어 휘발하므로 적게 검출되었다. 수산화나트륨 용액을 사용하여 환산매질을 중화하였다. 중화된 0.5 M $Na_2SO_4$ 매질 중 요오드 음이온의 농도범위가 0-20 mg/L인 구간에서 검정곡선의 직선성이 좋게 나타났다(r=0.99999).

• 산업기술연구
• /
• 제33권A호
• /
• pp.89-92
• /
• 2013

The characteristics of floc formation of the iron(Fe) ions was studied for developing the process treating the acid mine drainage. The metal ions in aqueous solution oxidized with oxygen in air, which generated hydrogen ion and lowered the pH of the aqueous solution. The iron(Fe) ions were formed into flocs by the acid-base reaction with the added $Ca(OH)_2$ for the neutralizing the solution. There were several variables affecting the formation, size and color of floc; whether air was present or not, air feeding rate, oxidizing time, concentration of $Ca(OH)_2$, the acid-base reaction time of the $iron(Fe)-Ca(OH)_2$. For proper formation of the $iron(Fe)-Ca(OH)_2$ flocs and developing the floc treating system, the control variables mentioned above should be considered.

• Carbon letters
• /
• 제10권4호
• /
• pp.305-313
• /
• 2009

In this study, the adsorption of toxic pollutants onto cetyltrimethylammonium kaolin (CTAB-Kaolin) is investigated. The organo-kaolin is synthesized by exchanging cetyltrimethylammonium cations (CTAB) with inorganic ions on the surface of kaolin. The chemical analysis, the structural and textural properties of kaolin and CTAB-kaolin were investigated using elemental analysis, FTIR, SEM and adsorption of nitrogen at $-196^{\circ}C$. The kinetic adsorption and adsorption capacity of the organo-kaolin towards o-xylene, phenol and Cu(II) ion from aqueous solution was investigated. The kinetic adsorption data of o-xylene, phenol and Cu(II) are in agreement with a second order model. The equilibrium adsorption data were found to fit Langmuir equation. The uptake of o-xylene and phenol from their aqueous solution by kaolin, CTAB-kaolin and activated carbon proceed via physisorption. The removal of Cu(II) ion from water depends on the surface properties of the adsorbent. Onto kaolin, the Cu(II) ions are adsorbed through cation exchange with $Na^+$. For CTAB-kaolin, Cu(II) ions are mainly adsorbed via electrostatic attraction with the counter ions in the electric double layer ($Br^-$), via ion pairing, Cu(II) ions removal by the activated carbon is probably related to the carbon-oxygen groups particularly those of acid type. The adsorption capacities of CTAB-kaolin for the investigated adsorbates are considerably higher compared with those of unmodified kaolin. However, the adsorption capacities of the activated carbons are by far higher than those determined for CTAB-kaolin.